Huawei, ZTE, Nokia, Alcatel Lucent, Fiberhome Network Hardware Store

Recently, we received a lot of inquiries about FLHF board, have you known the PON board? What’s the functions of the PON board? This article will introduce for you.

1. H901FLHF introduction:

The FLHF board is a 16-port Flex-PON OLT interface board. It can support GPON, XG(S)-PON, and XG(S)-PON&GPON Combo access now. It works together with the optical network unit (ONU) to provide XG(S)-PON and GPON access services. Hardware is ready for TWDM-PON in future.

2. Application:

NOTE:
The H901FLHF board port supports gpon, xg-pon, xgs-pon, combo-pon (xg/g), combo-pon (xgs/g) mode. Run the port flex-mode command to configure the port mode. By default, the port does not take effect. The port takes effect only after the port mode is configured and the corresponding optical module is inserted.

gpon indicates that the mode of the PON port is set to GPON.
xg-pon indicates that the mode of the PON port is set to XG-PON.
xgs-pon indicates that the mode of the PON port is set to XGS-PON.
combo-pon (xg-pon) indicates that the mode of the PON port is set to XG-PON&GPON Combo.
combo-pon (xgs-pon) indicates that the mode of the PON port is set to XGS-PON&GPON Combo.

From above article, we know FLHF supports GPON, XG(S)-PON, and XG(S)-PON&GPON Combo access now, which is the most flexible board. If you need upgrade GPON to XG(S)-PON, or your system will use combo pon, FLHF will be a better choice. If you still have any questions, please feel free to contact: [email protected].