- Description
- DATASHEET
- Reviews (1)
Description
TNS2N501 overview
TNS2N501 supports 1*200G/100G Programmable Hybrid Line Service Processing Board applied to Huawei OptiX OSN 9800.
The TNS2N501 board is a hybrid line board and supports a mixture of OTN and SDH services.
The TNS2N501 board processes and converts the received service signals into one OTU4/OTUC2 signal. The OTU4/OTUC2 or OTUC4 signals are carried over ITU-T G.694.1-compliant DWDM wavelengths.
The TNS2N501 board uses coherent receiving technologies and applies to coherent systems.
Appearance of the TNS2N501
Valid slots for the TNS2N501 board in a U64/U32/U16 subrack
Product | Valid Slots |
---|---|
OptiX OSN 9800 U32 Standard subrack | IU1-IU32 |
OptiX OSN 9800 U32 Enhanced subrack | IU1-IU32 |
OptiX OSN 9800 U64 Standard subrack | IU1-IU64 |
OptiX OSN 9800 U64 Enhanced subrack | IU1-IU64 |
OptiX OSN 9800 U16 subrack | IU1-IU14 |
Item | TNS2N501 | ||||||
---|---|---|---|---|---|---|---|
OTN functions |
Port in 100G mode:
Port in 200G mode:
Port in 400G mode
NOTE: Only the N502 board supports the 400G mode. |
||||||
WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. | ||||||
Tunable wavelength function | The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm). | ||||||
PRBS test function | Supports the PRBS function on the WDM side. | ||||||
Alarm and performance event monitoring |
|
||||||
Regeneration board | Supported | ||||||
Latency measurement | The board supports latency measurement in the WDM-side optical port direction (upstream direction).
NOTE: When VPs are configured, the board supports measuring the PM/TCM latency of higher-order and lower-order ODUk channels. |
||||||
Test frame | Not supported | ||||||
Physical clock | Supported | ||||||
IEEE 1588v2 | Not supported | ||||||
ITU-T G.8275.1 | Not supported | ||||||
ITU-T G.8273.2 | Not supported | ||||||
Typical channel spacing |
|
||||||
Electrical-layer ASON | Supported | ||||||
Optical-layer ASON | Supported
NOTE:
|
||||||
Protection schemes |
NOTE: When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection. Port in 400G mode: Do not support intra-board 1+1 protection. |
||||||
Loopback | WDM-Side Loopback | Supported | |||||
Channel loopback |
|
||||||
ESC | Supported |
Specifications for Optical Modules
Board | Optical Modules | Service type | Optical Module Type | Position |
---|---|---|---|---|
N501/N502 | CFP- 200G-(1529.17nm to 1567.1nm)(DWDM,Tunable,T15)-SMF Specifications
NOTE: The rate and modulation format can be set to 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
N501/N502 | 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHC, T22)-200G CFP Specifications
NOTE: The rate and modulation format can be set to 200G ePDM-e16QAM (SDFEC2), 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
N501/N502 | 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, high optical power, T23)-200G CFP
NOTE: The rate and modulation format can be set to 200G ePDM-e16QAM (SDFEC2), 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
N501/N502 | 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, T23)-200G CFP Specifications
NOTE: The rate and modulation format can be set to 200G ePDM-e16QAM (SDFEC2), 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
N501/N502 | Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHB, T2U)-CFP
NOTE: The rate and modulation format can be set to 200G ePDM-e16QAM (SDFEC2), 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
N501/N502 | Super C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHD, F23)-CFP
NOTE: The rate and modulation format can be set to 200G ePDM-e16QAM (SDFEC2), 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
N501/N502 | Super C band-Tunable wavelength-ePDM-200G 16QAM/100G QPSK/etc.(SDFEC/SDFEC2, Metro, F15)-CFP
NOTE: The rate and modulation format can be set to 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
N501/N502 | Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(Configurable rate and modulation format, Coherent, LHD, A23)-CFP
NOTE: The rate and modulation format can be set to 200G ePDM-e16QAM (SDFEC2), 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
N501/N502 | Super C band-Tunable wavelength-200G e16QAM/100G QPSK/etc.(LHD, High optical power, T23)-CFP-PIN
NOTE: The rate and modulation format can be set to 200G ePDM-e16QAM (SDFEC2), 200G ePDM-16QAM-H (SDFEC), 200G ePDM-16QAM (SDFEC), 100G ePDM-QPSK (wDCM, SDFEC2), or 100G ePDM-QPSK (SDFEC2). |
OTU4, OTUC2 | Pluggable Optical Module | WDM-Side |
tooantuh –
Nice purchase! The board is original new,delivery is fast. A pleasant experience.