TNS7N404C06
Huawei OptiX OSN 9800 board TNS7N404C06 4*100G hybrid line service processing board
Huawei
- Description
- DATASHEET
- Reviews (1)
Description
TNS7N404C06 overview
TNS7N404C06 4*100G hybrid line service processing board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order ODU4 cross-connections are created on the board, TCM section latency measurement is supported for higher-order ODU4 channels. When lower-order ODUK cross-connections are created on the board, PM/TCM section latency measurement is supported for higher-order ODU4 channels, and TCM section latency measurement is supported for lower-order ODUK channels. Provides four line ports and supports conversions between SDH signals from the backplane and ODUK signals.
Overhead processing:
Processes the section overheads of STM-16/STM-64 signals.
Supports the transparent transmission and termination of path overheads.
Supports the setting and query of the J0, J1, and C2 bytes.
Supports ECC communication.
Supports transparent transmission of DCC channels.
| Board function-OTN Line | |
| Name | Description |
| Backplane capacity | The total backplane bandwidth is 400 Gbit/s. |
| WDM specification | Supports the DWDM specifications. |
| Tunable wavelength | Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm). |
| FEC coding | SDFEC2 |
| Line modulation format | 100G QPSK, 100G QPSK wDCM |
| OTN overhead protocol | Supports the OTN frame format and overhead processing defined by ITU-T G.709. |
| OTN overhead | WDM-side OTU4 layer: supports SM overhead processing. ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing. ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports non-intrusive monitoring of PM and TCM overheads. |
| ODUk SNCP | Supported |
| tributary SNCP | Supported |
| Electrical-layer ASON | Supported |
| Optical-layer ASON | Supported |
| Physical clock | Supported (ODU0/ODU1/ODU2/ODU2e/ODU3/ODUflex) |
| IEEE 1588v2 | Not supported |
| ITU-T G.8275.1 | Not supported |
| ITU-T G.8273.2 | Not supported |
| Outband DCN | Not supported |
| Test frame | Supports communication over ESCs. |
| PRBS | Not supported |
| Channel loopback | ODUk (k=0, 1, 2, 2e, 3, flex) channel loopbacks |
| Port loopback | Supports WDM Side Loopback |
| Alarm and performance event monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events. |
| Board function-SDH | |
| Basic function | Provides four line ports and supports conversions between SDH signals from the backplane and ODUk signals. |
| Service processing | VC-12, VC-3, VC-4, VC-4-4c, VC-4-16c, VC-4-64c |
| SDH SNCP | Supported |
| Linear MSP | Supported |
| Ring MSP | Supports two-fiber bidirectional ring MSP |
| SDH ASON | Supported |
| Physical clock | Supports SDH clock synchronization. |
| Outband DCN | Supported |
| Channel loopback | Supports VC loopbacks. |
| Port loopback | Supports Virtual Port loopbacks. |
| 2M ASON | Supported |
| Alarm and performance event monitoring | Provides various alarms and performance events, facilitating equipment management and maintenance. |
| Basic function | Electrically regenerates optical signals at an electrical REG station. |
| Regeneration mode | Unidirectional regeneration Bidirectional regeneration |
| Regeneration rate | OTU4 |
| WDM specification | Supports the DWDM specifications. |
| Tunable wavelength | Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm). |
| FEC coding | SDFEC2 |
| Line modulation format | 100G QPSK,100G QPSK WDCM |
| OTN overhead | WDM-side OTU4 layer: supports SM overhead processing. ODU4 layer: supports PM and TCM overhead processing. ODU4 layer: supports non-intrusive monitoring of PM and TCM overheads. |
| Electrical-layer ASON | Not supported |
| Optical-layer ASON | Supported |
| Typical power(W) | 212.00 |
| Maximum power(W) | 225.00 |
| Board slot count |
|
| Applicable device |
|
| Weight(kg) | 3.1 |
| Wide(mm) | 30.50 |
| Deep(mm) | 220.00 |
| Height(mm) | 477.3 |
Mack –
The first cooperation is very happy, I hope there will be more opportunities in the future.