TNV7T220
Huawei OptiX OSN 9800 TNV7T220 20*10 Gbit/s Tributary Service Processing Board
Huawei
In Stock
Shenzhen Warehouse
- Description
- DATASHEET
- Reviews (1)
Description
TNV7T220 overview
TNV7T220 20*10 Gbit/s Tributary Service Processing Board applied to Huawei OptiX OSN 9800 U16/U32/U64/M24
To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.
TNV7T220 also comes with TNV3T220, TNV6T220 and TNV3T220E board version.
Front panel of the TNV7T220 board
Valid slots for the TNV7T220 board
Product | Valid Slots |
---|---|
OSN 9800 U32 Standard Subrack | IU1-IU32 |
OSN 9800 U32 Enhanced subrack | IU1-IU32 |
OSN 9800 U64 Standard Subrack | IU1-IU64 |
OSN 9800 U64 Enhanced Subrack | IU1-IU64 |
OptiX OSN 9800 U16 subrack | IU1-IU14 |
Item | TNV7T220 | |||
Basic function | Supports the following service conversions: | |||
ODU0 non-convergence mode (Any->ODU0) | ||||
20 x (125 Mbit/s to 1.25 Gbit/s signals) <-> 20 x ODU0. | ||||
ODU1 non-convergence mode (Any->ODU1) | ||||
20 x (1.49 Gbit/s to 2.67 Gbit/s signals) <-> 20 x ODU1. | ||||
ODU2 non-convergence mode (Any->ODU2(e)) | ||||
20 x 10GE LAN(GFP-F)/10GE WAN/STM-64/OC-192/OTU2/FC800/FICON8G<-> 20 x ODU2 | ||||
20 x 10GE LAN(BMP)/OTU2e/FC1200<-> 20 x ODU2e | ||||
ODUflex non-convergence mode (Any->ODUflex(n x 1.25Gbit/s, n≤160)) | ||||
20 x 3G-SDI/3G-SDIRBR/FC400/FICON4G/FC800/FICON8G/10GE LAN(GFP-F)<-> 20 x ODUflex | ||||
8 x 25GE(GFP-F)/25GE(BMP)<->8 x ODUflex | ||||
6 x FC3200<->6 x ODUflex | ||||
12 x FC1600<->12 x ODUflex | ||||
ODU1_ODU0 mode (OTU1->ODU1->ODU0) | ||||
20 x OTU1<-> 40 x ODU0 | ||||
ODU1 convergence mode (16*Any->ODU1) | ||||
16 x (125 Mbit/s to 2.5 Gbit/s signals) <-> ODU1 | ||||
Backplane bandwidth | 200 Gbit/s | |||
Service encryption | Supports setting the encryption function by port. | |||
Client-side service type | SDH/SONET service: | |||
STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s | ||||
STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s | ||||
STM-16/OC-48: SDH/SONET service at a rate of 2488.32 Mbit/s | ||||
STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s | ||||
Ethernet service: | ||||
FE: Ethernet service at a rate of 125 Mbit/s | ||||
GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals. | ||||
10GE LAN: Ethernet service at a rate of 10.31 Gbit/s | ||||
10GE WAN: Ethernet service at a rate of 9.95 Gbit/s | ||||
25GE: Ethernet service at a rate of 25.78 Gbit/s | ||||
OTN service: | ||||
OTU1: OTN service at a rate of 2.67 Gbit/s | ||||
OTU2: OTN service at a rate of 10.71 Gbit/s | ||||
OTU2e: OTN service at a rate of 11.1 Gbit/s | ||||
SAN service: | ||||
FC100: SAN service at a rate of 1.06 Gbit/s | ||||
FC200: SAN service at a rate of 2.12 Gbit/s | ||||
FC400: SAN service at a rate of 4.25 Gbit/s | ||||
FICON: SAN service at a rate of 1.06 Gbit/s | ||||
FICON Express: SAN service at a rate of 2.12 Gbit/s | ||||
FICON4G: SAN service at a rate of 4.25 Gbit/s | ||||
FC800: SAN service at a rate of 8.5 Gbit/s | ||||
FICON8G: SAN service at a rate of 8.5 Gbit/s | ||||
FC1200: SAN service at a rate of 10.51 Gbit/s | ||||
FC1600: SAN service at a rate of 14.025 Gbit/s | ||||
FC3200: SAN service at a rate of 28.05 Gbit/s | ||||
ESCON: SAN service at a rate of 200 Mbit/s | ||||
FDDI: SAN service at a rate of 125 Mbit/s | ||||
Video service: | ||||
SDI: Serial digital interface at a rate of 270 Mbit/s | ||||
HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s | ||||
HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s | ||||
3G-SDI: Video service at a rate of 2.97 Gbit/s | ||||
3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s | ||||
DVB-ASI: Video service at a rate of 270 Mbit/s | ||||
Cross-connect capabilities | Supports backplane cross-connections of 20 channels ODU0/ODU1/ODU2/ODU2e/ODUflex signals from/to the cross-connect board. | |||
OTN function | Supports the OTN frame format and overhead processing defined by ITU-T G.709. The mapping process complies with ITU-T G.7041, ITU-T G.709 and G.Sup43. | |||
ODUflex layer: supports PM overhead processing. | ||||
ODU0/ODU1/ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
OTU1/OTU2 layer: supports SM overhead processing. | ||||
ESC function | Supported when the client-side service type is OTU1/OTU2/OTU2e. | |||
PRBS test function | Supported. | |||
LLDP function | When the client-side service type is ethernet service, the board supports the LLDP function. | |||
LPT function | Supported when the client-side service type is FE, GE or 10GE LAN. | |||
FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU1 or OTU2(e). | |||
Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. | |||
Monitors B1 bytes to help locate faults. | ||||
Monitors OTN alarms and performance events. | ||||
Monitors parameters such as the bias current, temperature, and optical power of the laser. | ||||
Supports the remote monitoring (RMON) of Ethernet services. | ||||
ALS function | Supports the ALS function on the client side when client services are non-OTN services. | |||
Test frame | Supported | |||
Electrical-layer ASON | Supported | |||
Latency measurement | When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction). When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction). | |||
IEEE 1588v2 | Supports TC mode, TC+OC mode, BC mode and OC mode. | |||
ITU-T G.8275.1 | Supported | |||
ITU-T G.8273.2 | Only the board of an 9800 M24 subrack supports ITU-T G.8273.2. | |||
Physical clock | GE(TTT-GMP), 10GE LAN(BMP), 25GE(BMP): Supports synchronous Ethernet transparent transmission | |||
GE(GFP-T), 10GE LAN(GFP-F), 25GE(GFP-F): Supports synchronous Ethernet processing | ||||
Protection scheme | Supports client 1+1 protection. | |||
Supports ODUk SNCP. | ||||
Supports tributary SNCP protection. | ||||
Port MTU | The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes. | |||
Ethernet service mapping mode | GE: GE(TTT-GMP), GE(GFP-T) | |||
25GE: 25GE(BMP), 25GE (GFP-F) | ||||
10GE LAN: Bit transparent Mapping (11.1G), MAC transparent Mapping (10.7G) | ||||
Protocols or standards compliance | Protocols or standards for transparent transmission (non-performance monitoring) | IEEE 802.3u | ||
IEEE 802.3z | ||||
ITU-T G.707 | ||||
ITU-T G.782 | ||||
ITU-T G.783 | ||||
GR-253-CORE Synchronous Optical Network (SONET) transport Systems: Common Generic | ||||
NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) | ||||
NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) | ||||
NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) | ||||
NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) | ||||
NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) | ||||
NCITS FIBRE CHANNEL – PHYSICAL AND SIGNALING INTERFACE (FC-PH) | ||||
NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) | ||||
SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems | ||||
ETSI tr 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) | ||||
SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals – Serial Digital Interface | ||||
NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) | ||||
ANSI X3.139 Information Systems – Fiber Distributed Data Interface (FDDI) – Token Ring Media Access Control (MAC) | ||||
ANSI X3.148 Information Systems – Fiber Distributed Data Interface (FDDI) – Token Ring Physical Layer Protocol (PHY) | ||||
ANSI X3.166 Information Systems – Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM) | ||||
Protocols or standards for service processing (performance monitoring) | ITU-T G.805 | |||
ITU-T G.806 | ||||
ITU-T G.709 | ||||
ITU-T G.872 | ||||
ITU-T G.7710 | ||||
ITU-T G.798 | ||||
ITU-T G.874 | ||||
ITU-T M.3100 | ||||
ITU-T G.874.1 | ||||
ITU-T G.875 | ||||
ITU-T G.808.1 | ||||
ITU-T G.841 | ||||
ITU-T G.8201 | ||||
ITU-T G.873.1 | ||||
ITU-T G.694.1 | ||||
Dimensions of the front panel (H x W x D) | 477.3 mm (18.8 in.) x 30.5 mm (1.2 in.) x 220.0 mm (8.7 in.) | |||
Weight | 2.62 kg (5.7 lb.) | |||
Power Consumption (W) | 159-170 |
Specifications for Optical Modules
Board | Optical Modules | Service type | Service type | Position |
TNV7T220 | eSFP-2.125G-850nm-MMF-0.5km-I | GE, FC100, FICON | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-1.25G-1310nm-SMF-10km | GE, FC100, FICON | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-1.25G-1310nm-SMF-40km Specifications | GE, FC100, FICON | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-1.25G-1550nm-SMF-80km-01 Specifications | GE, FC100, FICON | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP-1000Base-T-autonegotiation-100m-RJ45-I | GE | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-2.5G-1310nm-SMF-15km Specifications | FE, FDDI, STM-1, OC-3, ESCON, STM-4, OC-12, GE, FC100, FICON, FC200, FICON Express, STM-16, OC-48, OTU1 | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-2.5G-(1471nm to 1611nm)(CWDM)-SMF-80km Specifications | FE, FDDI, STM-1, OC-3, ESCON, STM-4, OC-12, GE, FC100, FICON, FC200, FICON Express, STM-16, OC-48, OTU1 | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-2.5G-TX1310/RX1490nm(BIDI)-SMF-15km-I Specifications | FE, FDDI, STM-1, OC-3, ESCON, STM-4, OC-12, GE, FC100, FICON, FC200, FICON Express, STM-16, OC-48, OTU1 | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-2.5G-TX1490/RX1310nm(BIDI)-SMF-15km-I Specifications | FE, FDDI, STM-1, OC-3, ESCON, STM-4, OC-12, GE, FC100, FICON, FC200, FICON Express, STM-16, OC-48, OTU1 | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP,1550.12nm,125M~2.67Gbps,0~4.0dBm,-28.0dBm,LC,120km | FE, FDDI, STM-1, OC-3, ESCON, STM-4, OC-12, GE, FC100, FICON, FC200, FICON Express, STM-16, OC-48, OTU1 | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-4.25G-850nm-MMF-0.3km-I Specifications | FC200, FICON Express, FC400, FICON4G | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-4.25G-1310nm-SMF-10km Specifications | FC200, FICON Express, FC400, FICON4G | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -GE(LX)/10GE(LR/LW)-1310nm-SMF-10km | GE, FC100, FICON, FC800, FICON8G, 10GE WAN, 10GE LAN, FC1200 | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -10G(with CDR)-1310nm-SMF-10km | FC800, FICON8G, STM-64, OC-192, 10GE WAN, 10GE LAN, FC1200, OTU2(e) | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -10G(with CDR)-1550nm-SMF-40km Specifications | FC800, FICON8G, STM-64, OC-192, 10GE WAN, 10GE LAN, FC1200, OTU2(e) | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -10G(with CDR)-1550nm-SMF-80km Specifications | FC800, FICON8G, STM-64, OC-192, 10GE WAN, 10GE LAN, FC1200, OTU2(e) | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP28-28.05G-850nm-MMF-0.1km Specifications | FC800, FC1600, FC3200 | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP28-28.05G-1310nm-SMF-10km Specifications | FC800, FC1600, FC3200 | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -8.5G to 10.5G-850nm-MMF-0.3km Specifications | FC800, FICON8G, 10GE WAN, 10GE LAN, FC1200 | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -10G(10GE,LR/LW)-1310nm-SMF-10km | FC800, FICON8G, 10GE WAN, 10GE LAN, FC1200 | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -10G-1550nm-SMF-40km Specifications | FC800, FICON8G, 10GE WAN, 10GE LAN, FC1200 | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -10G(10GE,ZR/ZW)-1550nm-SMF-80km | FC800, FICON8G, 10GE WAN, 10GE LAN, FC1200 | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -2.5G to 11.3G-TX1270/RX1330nm(BIDI)-SMF-10km-I Specifications | STM-16, OTU1, 10GE WAN, 10GE LAN | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP+ -2.5G to 11.3G-TX1330/RX1270nm(BIDI)-SMF-10km-I Specifications | STM-16, OTU1, 10GE WAN, 10GE LAN | Pluggable Optical Module | Client-Side |
TNV7T220 | eSFP-3G-1310nm-SMF-10km Specifications | DVB-ASI, SDI, HD-SDI, HD–SDIRBR, 3G-SDI, 3G-SDIRBR | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP28-25G-850nm-LC-MMF-0.1km | 25GE | Pluggable Optical Module | Client-Side |
TNV7T220 | SFP28-25G-1310nm-10km-SM-I Specifications | 25GE | Pluggable Optical Module | Client-Side |
Ethan –
My customers need 4 Service Processing Board, Telecomate recommended it to me, thanks!!