$0.00 Original price was: $0.00.Current price is: $0.00.
Huawei H901OGHK 48-channels GE/FE P2P interface board apply to Huawei MA5800 series
Huawei H901OGHK is a P2P interface board, providing Ethernet optical access. It supports a maximum of 48 channels of GE/FE P2P access services. Apply to Huawei MA5800-X2, X7, X15, X17
Forwarding capability: 40 Gbit/s
Maximum frame size:
2052 bytes
9216 bytes (jumbo frame enabled)
Maximum number of MAC addresses: 131072
| Item | H901OGHK |
| Function | |
| Forwarding capability | 40 Gbit/s |
| MAC address number | 131072 |
| Shaping in inband and outband management | Supported |
| Link aggregation | Supported |
| MSTP ring network protection | Supported |
| Protection group | Supported |
| Temperature query | Supported |
| Automatic shutdown at high temperature | Supported |
| high temperature alarm | Supported |
| Clock synchronization | Supported |
| Maximum Frame Size | 2052 bytes 9216 bytes(jumbo frame enabled) |
| Environment | |
| Operating temperature | -40°C to +65°C |
| Power consumption |
Static: 42W Maximum: 75W |
What are the uplink board of the MA5800?
NXED:8-10GE uplink board
NCEB: 2-port Enhanced 100GE Uplink Interface Board
Which control boards does MA5800 use?
MPLA / MPLB
Provides system control, switching, clock processing, security, and uplink interfaces (GE/10GE).
I have MA5800 with CSHF card. If I use XG-PON and XGS-PON ONTs mixed on a port. How can they share the download/upload bandwith?
When XG-PON and XGS-PON ONTs are mixed on the same PON port of an MA5800 with a CSHF card, they share the same optical wavelength for downstream but use different upstream channels.
In the downstream direction, both XG-PON and XGS-PON ONTs receive data from the same 10 Gbps wavelength. So if the XG-PON ONTs are using 5 Gbps, the remaining 5 Gbps can still be used by the XGS-PON ONTs. The total downstream capacity is shared dynamically among all ONTs connected to that port, depending on traffic demand and DBA (Dynamic Bandwidth Allocation) scheduling.
In the upstream direction, it’s different:
XG-PON uses a 2.5 Gbps upstream channel.
XGS-PON uses a 10 Gbps upstream channel.
What sub-rack models are available in the MA5800 series?
*MA5800-X2: 2 service slots
*MA5800-X7: 7 service slots
*MA5800-X15: 15 service slots
All models share the same software system and service boards.
How to add local digitmap for Huwei ONT?
Because the specific ONT model is unknown, you can refer to the general ONT configuration method for configuring the ONT digitmap.
1. Log in to the WebUI of the Huawei ONT.
2. In the navigation tree on the left, choose Advanced Configuration > Voice > VoIP Basic Configuration. In the pane on the right, parameters of a VoIP interface can be configured, including the IP addresses of the primary server and secondary server, and digitmap.
| Weight | 3.5000 kg |
|---|---|
| Dimensions | 50.0000 × 33.0000 × 8.0000 cm |
| MA5800 |
.svg)
.svg)
Crum –
Received 10pcs OGHK boards, they are new and ship with test report, very good service!
Duke –
Compared with our local area, the price is really affordable, and I will repurchase.