ETP48200-C5A1

0 Reviews Write a review
SKU2026033
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

The Huawei ETP48200-C5A1 is embedded telecom power systems that supply power to –48 V DC communications equipment with a maximum current of 200 A.

Description

Overview

ETP48200-C5A1 is embedded telecom power systems that supply power to –48 V DC communications equipment with a maximum current of 200 A.

 

ETP48200-C5A1 Appearance

ETP48200 C5A1

(1) Ground screw

(2) AC input circuit breaker

(3) SMU

(4) Battery switch (behind the cover)

(5) Space for installing rectifiers

(6) UIM

(7) Battery circuit breakers

(8) BLVD circuit breakers

(9) LLVD circuit breakers

(10) AC SPD

 

System Configurations

Item

ETP48200-C5A1

Subrack

  • 1 U space for installing rectifiers
  • 4 U space for installing power distribution components

PDU

  • AC PDU: AC input circuit breaker
  • DC PDU: battery low voltage disconnection (BLVD), load low voltage disconnection (LLVD), and battery branch

Rectifier

A maximum of four R4850G2s

SMU

SMU02B

User interface module (UIM)

UIM02C

Surge protective device (SPD)

AC SPD: Nominal discharge current: 30 kA, maximum discharge current: 60 kA (8/20 µs)

DC SPD: Differential mode: 10 kA; common mode: 20 kA (8/20 µs)

ETP48200-C5A1 Datasheet

Item

ETP48200-C5A1

Specifications

Environmental requirements

Operating temperature

-40°C to +65°C

Transportation temperature

-40°C to +70°C

Storage temperature

-40°C to +70°C

Operating humidity

5%-95% RH

Storage humidity

5%-95% RH

Altitude

0-4000 m

When the altitude ranges from 2000 m to 4000 m, the operating temperature decreases by 1°C for each additional 200 m.

AC input

Input system

  • ETP48200–C5A1: 220/380 V AC, three-phase, four-wire compatible with 220 V AC single-phase
  • ETP48200–C5A3: 110 V AC dual-live wire compatible with 220 V AC single-phase

Input frequency

45-66 Hz (rated frequency: 50 Hz or 60 Hz)

Power factor (PF)

≥ 0.99

Ta = 25℃,

Vin = 208 V AC, 220 V AC, 230 V AC, or 240 V AC, where

PF> 0.90, 25%-50% load percentage

PF> 0.98, 50%-100% load percentage

PF> 0.99, 100% load percentage

Total harmonic distortion (THD)

≤ 10%

Rectifiers: EN61000-3-2

Ta = 25°C

Vin = 208 V AC, 220 V AC, 230 V AC, or 240 V AC, where

THD (V) < 1.1%, THD (I) ≤ 5%

50%–100% load percentage

DC output

Output voltage range

-42 V DC to -58 V DC

Default output voltage

-53.5 V DC

Maximum output power

12000 W

Regulated voltage precision

≤ 1%

Peak-to-peak noise voltage

≤ 200 mV (0-20 MHz)

Noise weighting

≤ 2 mV (300–3400 Hz, –48 V DC ≤ output voltage ≤ –55 V DC)

Unbalance of load sharing

≤ ±5% (with 20% to 100% loads)

AC input protection

AC input overvoltage protection threshold

> 300 V AC

AC input overvoltage recovery threshold

When the voltage is restored to 290 V AC, the output resumes.

AC input undervoltage protection threshold

< 80 V AC

AC input undervoltage recovery threshold

When the voltage is restored to 85 V AC, the output resumes.

DC output protection

DC output overvoltage protection threshold

-58.5 V DC to -60.5 V DC

Electromagnetic compatibility (EMC) specifications

Conducted emission (CE)

Input port: Class B of CISPR 22/EN 55022

Output port: Class A of CISPR 22/EN 55022

Radiated interference

Class B of CISPR 22/EN 55022

Harmonic current

IEC 61000-3-12

Voltage fluctuation

IEC 61000-3-11

Electrostatic discharge (ESD)

Shell ports: contact discharge of 6 kV and air discharge of 8 kV; signal ports: contact discharge of 2 kV

Electrical fast transient (EFT)

Signal port: 1 kV; power port: 2 kV

Radiated susceptibility (RS)

Level 3; field strength: 10 V/m

Conducted susceptibility (CS)

Signal port: 3 V; power port: 10 V

Surge immunity

AC and DC power ports: Differential mode: 2 kV (8/20 µs); common mode: 4 kV (8/20 µs)

Voltage dips immunity (DIP)

IEC 61000-4-11

Others

Surge protection

AC power port: nominal lightning strike discharge current: 20 kA (8/20 µs); maximum lightning strike discharge current: 40 kA (8/20 µs)

DC power port: differential mode: 10 kA (8/20 µs); common mode: 10 kA (8/20 µs)

Safety design

Complies with IEC/EN60950-1 and GB4943 and passes TUV and CE.

Mean time between failures (MTBF)

200,000 hours

Structure

Power system

H x W x D: 222.25 mm x 482 mm x 330 mm

Weight

≤ 30 kg (without rectifiers)

Protection level

IP20

Installation mode

Equipped with mounting ears to adapt to 19-inch cabinets

Cable routing

Routed in and out from the top

Maintenance mode

Maintained from the front

Heat dissipation

Natural cooling

Additional information

Brand

Huawei

ETP48200-C5A1 Datasheet

Item

ETP48200-C5A1

Specifications

Environmental requirements

Operating temperature

-40°C to +65°C

Transportation temperature

-40°C to +70°C

Storage temperature

-40°C to +70°C

Operating humidity

5%-95% RH

Storage humidity

5%-95% RH

Altitude

0-4000 m

When the altitude ranges from 2000 m to 4000 m, the operating temperature decreases by 1°C for each additional 200 m.

AC input

Input system

  • ETP48200–C5A1: 220/380 V AC, three-phase, four-wire compatible with 220 V AC single-phase
  • ETP48200–C5A3: 110 V AC dual-live wire compatible with 220 V AC single-phase

Input frequency

45-66 Hz (rated frequency: 50 Hz or 60 Hz)

Power factor (PF)

≥ 0.99

Ta = 25℃,

Vin = 208 V AC, 220 V AC, 230 V AC, or 240 V AC, where

PF> 0.90, 25%-50% load percentage

PF> 0.98, 50%-100% load percentage

PF> 0.99, 100% load percentage

Total harmonic distortion (THD)

≤ 10%

Rectifiers: EN61000-3-2

Ta = 25°C

Vin = 208 V AC, 220 V AC, 230 V AC, or 240 V AC, where

THD (V) < 1.1%, THD (I) ≤ 5%

50%–100% load percentage

DC output

Output voltage range

-42 V DC to -58 V DC

Default output voltage

-53.5 V DC

Maximum output power

12000 W

Regulated voltage precision

≤ 1%

Peak-to-peak noise voltage

≤ 200 mV (0-20 MHz)

Noise weighting

≤ 2 mV (300–3400 Hz, –48 V DC ≤ output voltage ≤ –55 V DC)

Unbalance of load sharing

≤ ±5% (with 20% to 100% loads)

AC input protection

AC input overvoltage protection threshold

> 300 V AC

AC input overvoltage recovery threshold

When the voltage is restored to 290 V AC, the output resumes.

AC input undervoltage protection threshold

< 80 V AC

AC input undervoltage recovery threshold

When the voltage is restored to 85 V AC, the output resumes.

DC output protection

DC output overvoltage protection threshold

-58.5 V DC to -60.5 V DC

Electromagnetic compatibility (EMC) specifications

Conducted emission (CE)

Input port: Class B of CISPR 22/EN 55022

Output port: Class A of CISPR 22/EN 55022

Radiated interference

Class B of CISPR 22/EN 55022

Harmonic current

IEC 61000-3-12

Voltage fluctuation

IEC 61000-3-11

Electrostatic discharge (ESD)

Shell ports: contact discharge of 6 kV and air discharge of 8 kV; signal ports: contact discharge of 2 kV

Electrical fast transient (EFT)

Signal port: 1 kV; power port: 2 kV

Radiated susceptibility (RS)

Level 3; field strength: 10 V/m

Conducted susceptibility (CS)

Signal port: 3 V; power port: 10 V

Surge immunity

AC and DC power ports: Differential mode: 2 kV (8/20 µs); common mode: 4 kV (8/20 µs)

Voltage dips immunity (DIP)

IEC 61000-4-11

Others

Surge protection

AC power port: nominal lightning strike discharge current: 20 kA (8/20 µs); maximum lightning strike discharge current: 40 kA (8/20 µs)

DC power port: differential mode: 10 kA (8/20 µs); common mode: 10 kA (8/20 µs)

Safety design

Complies with IEC/EN60950-1 and GB4943 and passes TUV and CE.

Mean time between failures (MTBF)

200,000 hours

Structure

Power system

H x W x D: 222.25 mm x 482 mm x 330 mm

Weight

≤ 30 kg (without rectifiers)

Protection level

IP20

Installation mode

Equipped with mounting ears to adapt to 19-inch cabinets

Cable routing

Routed in and out from the top

Maintenance mode

Maintained from the front

Heat dissipation

Natural cooling

Reviews

There are no reviews yet.

Be the first to review “ETP48200-C5A1”

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart