ETP48200-C5D6

0 Reviews Write a review
SKU2026031
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

The Huawei ETP48200-C5D6 is an embedded power system that converts AC power into DC power and supplies –48 V DC power to communications equipment.

Description

Overview

The ETP48200-C5D6 is an embedded power system that converts AC power into DC power and supplies –48 V DC power to communications equipment. The AC input, AC output, DC output, and battery circuit breakers as well as AC surge protective device (SPD) can be flexibly configured.

 

ETP48200-C5D6 Appearance

ETP48200 C5D6

(1) AC input circuit breaker and terminals (2) AC lightning arrester (3) AC output circuit breaker and terminals
(4) LLVD circuit breaker (5) BLVD circuit breaker (6) Battery circuit breaker
(7) Battery forced power-on switch (behind the cover) (8) UIM02C (9) Rectifier module installation space
(10) SMU02B (11) Grounding screw

 

System Configurations

Item

ETP48200-C5D6

Power distribution unit (PDU)

  • AC power distribution: 220/380 V AC three-phase four-wire compatible with 220 V AC single-phase, 110 V AC dual-live-wire compatible with 220 V AC single-phase, or no AC input (DC subrack)
  • AC output: optional capacity and route quantity
  • AC SPD: level B or C, or no SPD
  • DC power distribution: optional capacity and route quantity
    • A minimum of three BLVD routes and three LLVD routes
    • Optional capacity: 6 A/1 P, 10 A/1 P, 16 A/1 P, 20 A/1 P, 25 A/1 P, 32 A/1 P, 40 A/1 P, 50 A/1 P, 63 A/1 P, 80 A/1 P, 100 A/1 P, 125 A/1 P
  • Battery power distribution: optional capacity and route quantity
    • 1 route: 125 A/2 P
    • 2 routes: 100 A/1 P or 125 A/1 P
    • 3 routes: 80 A/1 P, 100 A/1 P, or 125 A/1 P
    • 4 routes: 80 A/1 P, 100 A/1 P, or 125 A/1 P

Rectifier

A maximum of four rectifiers

Monitoring module

SMU02B/SMU02C

User interface module

UIM02C/UIM02D

ETP48200-C5D6 Datasheet

Item

ETP48200-C5D6

Specifications

Environment conditions

Operating temperature

–40°C to +65°C

Transport temperature

–40°C to +70°C

Storage temperature

–40°C to +70°C

Operating humidity

5%–95% RH (non-condensing)

Storage humidity

5%–95% RH (non-condensing)

Altitude

0–4000 m

When the altitude ranges from 3000 m to 4000 m, high temperature derating applies and the operating temperature decreases by 1°C for each additional 200 m.

Others

There should be no conductive dust, corrosive gas, or explosion hazard.

Dust, corrosive substances, pests, molds, and other indicators should be controlled in accordance with class 3.1 requirements in ETSI EN 300 019-1-3 (V2.3.2 or later version).

AC input

Input system

220/380 V AC three-phase four-wire compatible with 220 V AC single-phase, 110 V AC dual-live-wire compatible with 220 V AC single-phase, or no AC input (DC subrack)

Input frequency

45–66 Hz; rated frequency: 50 Hz/60 Hz

Power factor

≥ 0.99 (rated input, loaded)

DC output

Output voltage range

–42 V DC to –58 V DC

Default output voltage

–53.5 V DC

Maximum output power

12,000 W (supports N+1 backup and keeps long-term operating current output within 150 A)

Regulated voltage precision

≤ ±1% (The output voltage is within 53.5 V DC ±0.1 V DC at 50% loads.)

Peak-to-peak noise voltage

≤ 200 mV (rated input voltage and load)

Psophometrically weighted noise voltage

≤ 2 mV (300–3400 Hz, input power ≤ 264 V AC)

Current sharing imbalance

≤ ±5% (50%–100% load)

AC input protection

AC input overvoltage protection threshold

≥ 300 V AC

AC input overvoltage recovery threshold

290–300 V AC

AC input undervoltage protection threshold

≤ 80 V AC

AC input undervoltage recovery threshold

80–90 V AC

DC output protection

DC output overvoltage protection threshold

Range: –58.5 V DC to –60.5 V DC

EMC specifications

Conducted emission

AC port: EN55022 class B

DC port: EN55022 class A1

Radiated emission (RE)

EN55022 class B

Harmonic current

IEC 61000-3-12

Voltage fluctuation and flicker

IEC 61000-3-11

ESD

IEC 61000-4-2

Enclosure port: contact discharge of 6 kV and air discharge of 8 kV; signal port: contact discharge of 2 kV

Electrical fast transient (EFT)

IEC 61000-4-4

AC and DC power ports: 2 kV

Radiated susceptibility (RS)

IEC 61000-4-3

10 V/m field strength

Conducted susceptibility (CS)

IEC 61000-4-6

Power port: 10 V; signal port: 3 V

Surge susceptibility

IEC 61000-4-5

AC and DC power ports: 2 kV (8/20 µs) in differential mode and 4 kV (8/20 µs) in common mode

Voltage dip

IEC 61000-4-11

Others

Safety design

IEC60950-1: 2005/EN60950-1: 2006/GB 4943, TLC and CE certifications

Mean time between failures (MTBF)

200,000 hours (at 25°C)

Structure

Power system dimensions (H x W x D)

222.25 mm x 482.6 mm x 330 mm

Weight

≤ 20 kg (excluding rectifiers)

Protection level

IP20

Installation mode

Installed in a 19-inch rack

Cabling mode

Routed in and out from the top

Maintenance mode

Maintained from the front

Cooling

Natural cooling

Additional information

Brand

Huawei

ETP48200-C5D6 Datasheet

Item

ETP48200-C5D6

Specifications

Environment conditions

Operating temperature

–40°C to +65°C

Transport temperature

–40°C to +70°C

Storage temperature

–40°C to +70°C

Operating humidity

5%–95% RH (non-condensing)

Storage humidity

5%–95% RH (non-condensing)

Altitude

0–4000 m

When the altitude ranges from 3000 m to 4000 m, high temperature derating applies and the operating temperature decreases by 1°C for each additional 200 m.

Others

There should be no conductive dust, corrosive gas, or explosion hazard.

Dust, corrosive substances, pests, molds, and other indicators should be controlled in accordance with class 3.1 requirements in ETSI EN 300 019-1-3 (V2.3.2 or later version).

AC input

Input system

220/380 V AC three-phase four-wire compatible with 220 V AC single-phase, 110 V AC dual-live-wire compatible with 220 V AC single-phase, or no AC input (DC subrack)

Input frequency

45–66 Hz; rated frequency: 50 Hz/60 Hz

Power factor

≥ 0.99 (rated input, loaded)

DC output

Output voltage range

–42 V DC to –58 V DC

Default output voltage

–53.5 V DC

Maximum output power

12,000 W (supports N+1 backup and keeps long-term operating current output within 150 A)

Regulated voltage precision

≤ ±1% (The output voltage is within 53.5 V DC ±0.1 V DC at 50% loads.)

Peak-to-peak noise voltage

≤ 200 mV (rated input voltage and load)

Psophometrically weighted noise voltage

≤ 2 mV (300–3400 Hz, input power ≤ 264 V AC)

Current sharing imbalance

≤ ±5% (50%–100% load)

AC input protection

AC input overvoltage protection threshold

≥ 300 V AC

AC input overvoltage recovery threshold

290–300 V AC

AC input undervoltage protection threshold

≤ 80 V AC

AC input undervoltage recovery threshold

80–90 V AC

DC output protection

DC output overvoltage protection threshold

Range: –58.5 V DC to –60.5 V DC

EMC specifications

Conducted emission

AC port: EN55022 class B

DC port: EN55022 class A1

Radiated emission (RE)

EN55022 class B

Harmonic current

IEC 61000-3-12

Voltage fluctuation and flicker

IEC 61000-3-11

ESD

IEC 61000-4-2

Enclosure port: contact discharge of 6 kV and air discharge of 8 kV; signal port: contact discharge of 2 kV

Electrical fast transient (EFT)

IEC 61000-4-4

AC and DC power ports: 2 kV

Radiated susceptibility (RS)

IEC 61000-4-3

10 V/m field strength

Conducted susceptibility (CS)

IEC 61000-4-6

Power port: 10 V; signal port: 3 V

Surge susceptibility

IEC 61000-4-5

AC and DC power ports: 2 kV (8/20 µs) in differential mode and 4 kV (8/20 µs) in common mode

Voltage dip

IEC 61000-4-11

Others

Safety design

IEC60950-1: 2005/EN60950-1: 2006/GB 4943, TLC and CE certifications

Mean time between failures (MTBF)

200,000 hours (at 25°C)

Structure

Power system dimensions (H x W x D)

222.25 mm x 482.6 mm x 330 mm

Weight

≤ 20 kg (excluding rectifiers)

Protection level

IP20

Installation mode

Installed in a 19-inch rack

Cabling mode

Routed in and out from the top

Maintenance mode

Maintained from the front

Cooling

Natural cooling

Reviews

There are no reviews yet.

Be the first to review “ETP48200-C5D6”

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart