ETP48400-C9A4

0 Reviews Write a review
SKU2017500
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

ETP48400-C9A4 is an embedded telecom power system that supplies power to –48 V DC communications equipment with a maximum current of 400 A.

Description

Overview

 

ETP48400-C9A4 is an embedded telecom power system that supplies power to –48 V DC communications equipment with a maximum current of 400 A.

ETP48400-C9A4 Appearance

ETP48400-C9A4

(1) RTN+ busbar

(2) LLVD circuit breakers

(3) SMU02C

(4) Space for rectifiers

(5) Ground screw

(6) AC input circuit breakers and terminal

(7) AC SPD

(8) Multi-purpose maintenance socket and protection circuit breaker

(9) AC output circuit breaker

(10) AC transfer terminals

(11) UIM02C

(12) Battery switch (behind the cover)

(13) Battery circuit breakers

(14) BLVD circuit breakers

ETP48400-C9A4 Datasheet

ETP48400-C9A4

Specifications

AC input

Input system

220/380 V AC three-phase four-wire (default), compatible with 127/220 V AC three-live wire

Input frequency

45–66 Hz (rated frequency: 50 Hz or 60 Hz)

Power factor (PF)

≥ 0.99 (rated input, with 100% loads)

DC output

Output voltage range

–42 V DC to –58 V DC

Default output voltage

–53.5 V DC

Maximum output power

24000 W (supports N+1 backup; maximum total output current does not exceed 400 A; and long-term operating current output does not exceed 350 A).

Regulated voltage precision

≤ ±1% (The output voltage is within 53.5 V DC ±0.1 under 50% loads.)

Peak-to-peak noise voltage

≤ 200 mV (rated input voltage and 0%–100% load)

Psophometrically weighted noise

≤ 2 mV (300–3400 Hz; input power ≤ 264 V AC)

Current sharing imbalance

≤ ±5% (50%–100% load)

AC input protection

AC input overvoltage protection threshold

≥ 300 V AC

AC input overvoltage recovery threshold

290 V AC–300 V AC

AC input undervoltage protection threshold

≤ 80 V AC

AC input undervoltage recovery threshold

80 V AC–90 V AC

DC output protection

DC output overvoltage protection threshold

–58.5 V DC to –60.5 V DC

  • If overvoltage occurs inside a rectifier, the rectifier locks out.
  • If the external voltage is greater than -63 V DC for more than 500 ms, the rectifier locks out.

AC surge protection

Nominal lightning strike discharge current: 30 kA (8/20 µs); maximum lightning strike discharge current: 60 kA (8/20 µs)

DC surge protection

Differential mode: 10 kA (8/20 µs); common mode: 20 kA (8/20 µs)

Safety

IEC/EN60950-1 and GB4943, TLC and CE certifications

MTBF

200,000 hours (at 25°C)

Additional information

Weight 12.0000 kg
Dimensions 58.0000 × 40.0000 × 17.0000 cm
ETP48400-C9A4 Datasheet

ETP48400-C9A4

Specifications

AC input

Input system

220/380 V AC three-phase four-wire (default), compatible with 127/220 V AC three-live wire

Input frequency

45–66 Hz (rated frequency: 50 Hz or 60 Hz)

Power factor (PF)

≥ 0.99 (rated input, with 100% loads)

DC output

Output voltage range

–42 V DC to –58 V DC

Default output voltage

–53.5 V DC

Maximum output power

24000 W (supports N+1 backup; maximum total output current does not exceed 400 A; and long-term operating current output does not exceed 350 A).

Regulated voltage precision

≤ ±1% (The output voltage is within 53.5 V DC ±0.1 under 50% loads.)

Peak-to-peak noise voltage

≤ 200 mV (rated input voltage and 0%–100% load)

Psophometrically weighted noise

≤ 2 mV (300–3400 Hz; input power ≤ 264 V AC)

Current sharing imbalance

≤ ±5% (50%–100% load)

AC input protection

AC input overvoltage protection threshold

≥ 300 V AC

AC input overvoltage recovery threshold

290 V AC–300 V AC

AC input undervoltage protection threshold

≤ 80 V AC

AC input undervoltage recovery threshold

80 V AC–90 V AC

DC output protection

DC output overvoltage protection threshold

–58.5 V DC to –60.5 V DC

  • If overvoltage occurs inside a rectifier, the rectifier locks out.
  • If the external voltage is greater than -63 V DC for more than 500 ms, the rectifier locks out.

AC surge protection

Nominal lightning strike discharge current: 30 kA (8/20 µs); maximum lightning strike discharge current: 60 kA (8/20 µs)

DC surge protection

Differential mode: 10 kA (8/20 µs); common mode: 20 kA (8/20 µs)

Safety

IEC/EN60950-1 and GB4943, TLC and CE certifications

MTBF

200,000 hours (at 25°C)

Reviews

There are no reviews yet.

Be the first to review “ETP48400-C9A4”

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart