H806GPBD C++

What is the recommended optical power range for GPON on the MA5600 Series?

Typical GPON optical power budget:
1. OLT Receiver (Rx): –8 dBm to –27 dBm
2. ONU Receiver (Rx): –8 dBm to –27 dBm
Proper optical design is required to prevent ONU flapping caused by excessive split ratios or fiber degradation.

What is the maximum access capacity supported by the MA5608T chassis?

Depending on installed service boards, the MA5608T can support up to:
1. 4,096 GPON subscribers (with typical 1:64 split ratio)
2. 2 service slots for PON boards
Actual capacity depends on optical budget, splitter design, and upstream network planning.

Which PON technologies are supported by the MA5608T?

The MA5608T supports:
GPON service boards (ITU-T G.984)
EPON service boards (IEEE 802.3ah)

What control and switching capabilities does the MA5608T provide?

The MA5608T supports dual-control-board architecture and provides high switching throughput with carrier-grade forwarding performance. It supports L2/L3 edge access features, including VLAN, QinQ, QoS, multicast, and user authentication.

Can the MA5600 Series interoperate with third-party ONUs/ONTs?

Yes, as long as both sides comply with ITU-T G.988 OMCI standards.
However, advanced functions such as Wi-Fi, VoIP, TR-069, and custom VLAN templates may behave differently.
A full OMCI interoperability and service verification test is strongly recommended before large-scale deployment.