.svg)
.svg)
Description
H901MPSC is a main control card of Huawei SmartAX MA5800-X2 NG OLT; it is the core of system control and service switching and aggregation. MAX access 4096 subscribers, and supports 98816 ARP table.
Supports active/standby switchover at the control plane
Supports load sharing mode at the forwarding plane, doubling processing performance
Supports ISSU, saving the upgrade interruption time
Supports synchronization Ethernet
Supports 1588v2
Supports interfaces CON (RJ-45)/ESC (RJ-45), ETH (RJ-45)
Supports Communication Interfaces L/A 0 to L/A 3 (4 x SFP+/SFP 10GE/GE ports)
| Item | H901MPLA |
| Environment | Operating temperature：-40°C to +65°C |
| Power consumption：Static: 53W Maximum: 67W |
|
| Bandwidth per slot | 100 Gbit/s (load sharing mode) |
| MAC address table | 262143 |
| Access ONT | 4096 |
| Multicast user | 4000 |
| IPv4 routing table | 65536 |
| IPv6 routing table | 16384 |
| Service port | 32768 |
| ARP table | 65536 |
| Maximum Frame Size | 2052 bytes9216 bytes (jumbo frame enabled) |
| Dimensions(mm) | 35.28 (W)x 258.15 (D) x 130.36 (H) |
| Weight(kg) | 2.2kg |
Daveonasaf –
There are some differences with MPSA. My own MPSA just supprts 40G slot bandwidth, this one enhanced a lot and it supports 80G slot bandwidth. MPSC also integrated with 4* GE/10GE uplink
port, better than before.
Abner –
Compared with MPSA, MPSC has stronger performance. It has 80G slot bandwidth and supports 4* GE/10GE uplink interface. I prefer MPSC.
Linur –
MPSC is shortage in the market recently, so i bought MPSA.