Home/GPON Network/Huawei GPON/Huawei MA5800 Series/H902TWHD
H902TWHD
Categories:

H902TWHD

1 Review Write a review
SKU10606
AvailabilityIn Stock
huawei-ma5800 XGS-PON Board
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Original price was: $0.00.Current price is: $0.00.

Huawei H902TWHD MA5800 series 8-port XGS-PON interface board with XGS-PON N1/N2 optical module

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

H902TWHD Overview

Huawei H902TWHD is an 8-port XGS-PON interface board with XGS-PON N1/N2 optical module, it works together with the optical network unit(ONU) to provide XG(S)-PON access services. Apply to Huawei MA5800 series OLT, MA5800-X2, X7, X15, X17.
Forwading Capality: 80Gbit/s
8*XG(S)-PON ports(SFP+)
Max split radio: 1:256
Maximum Frame Size:
2052 bytes
9216 bytes (jumbo frame enabled)
T-CONTs per PON port: 2048
Maximum number of MAC addresses: 131072
Service flows per PON board: 16376
Maximum distance difference between two ONUS under the same pon port: 40 km
Tx: 9.953 Gbit/s
Rx: 9.953/2.488 Gbit/s

Front Panel

H902TWHD

H902TWHD Datasheet
Item H902TWHD
Service Port
Port 8
Forwarding capability 80 Gbit/s
Rate mode Asymmetric rate Symmetric rate
T-CONTs per PON port 2048
Service flows per PON board 16376
Maximum frame size 2052 bytes 9216 bytes(jumbo frame enabled)
Maximum number of MAC addresses 131072
Maximum distance difference between two ONUS under the same pon port 40km
FEC Bidirection
CAR group Supported
HQoS Supported
Variable-length OMCI Supported
ONU-based shaping or queue-based shaping Supported
Type B protection(dual-homing) Supported
Type B protection(single-homing) Supported
1588v2 Supported
Rogue ONT detection and isolation Supported
Automatic shutdown at high temperature Supported
Energy saving for service boards Supported
D-CCAP Supported
GPON SFP Module Specification
Type N2 Module: One-fiber bidirectional optical module, N2 N1 Module: One-fiber bidirectional optical module, N1
Operating Wavelength Tx: 1577 nm Rx: 1270 nm
Encapsulation Type XFP
Port Rate Tx: 9.953 Gbit/s Rx: 9.953/2.488 Gbit/s
Minimun Output Optical Power N2 Module: 4 dBm N1 Module: 2 dBm
Maximum Output Optical Power N2 Module: 7 dBm N1 Module: 5 dBm
Maximum Receiver Sensitivity N2 Module: XG-PON channel: -29.5 dBm XGS-PON channel: -28 dBm N1 Module: XG-PON channel: -27.5 dBm XGS-PON channel: -26 dBm
Optical Connector Type SC
Optical Fiber Type Single-mode
Overload Optical Power N2 Module: XG-PON channel: -9 dBm XGS-PON channel: -7 dBm N1 Module: XG-PON channel: -7 dBm XGS-PON channel: -5 dBm
Extinction Ratio 8.2 dB
Dimensions (W x D x H) 258 mm x 23 mm x 399 mm
Power Consumption Static: 26 W Maximum: 48 W
Operating temperature -40° C to +65° C

What are the uplink board of the MA5800?

NXED:8-10GE uplink board
NCEB: 2-port Enhanced 100GE Uplink Interface Board

What sub-rack models are available in the MA5800 series?

*MA5800-X2: 2 service slots
*MA5800-X7: 7 service slots
*MA5800-X15: 15 service slots
All models share the same software system and service boards.

I have MA5800 with CSHF card. If I use XG-PON and XGS-PON ONTs mixed on a port. How can they share the download/upload bandwith?

When XG-PON and XGS-PON ONTs are mixed on the same PON port of an MA5800 with a CSHF card, they share the same optical wavelength for downstream but use different upstream channels.
In the downstream direction, both XG-PON and XGS-PON ONTs receive data from the same 10 Gbps wavelength. So if the XG-PON ONTs are using 5 Gbps, the remaining 5 Gbps can still be used by the XGS-PON ONTs. The total downstream capacity is shared dynamically among all ONTs connected to that port, depending on traffic demand and DBA (Dynamic Bandwidth Allocation) scheduling.
In the upstream direction, it’s different:
XG-PON uses a 2.5 Gbps upstream channel.
XGS-PON uses a 10 Gbps upstream channel.

What are the differences between MPLA and MPLB? What versions are available?

MPLA and MPLB both integrated with4*GE/10GE uplink port, the difference is that MPLA supports 100G slot bandwidth, while MPLB supports 200G.
Currently available version are H901/H902/H903/H907MPLB and H901/H902/H903/H905MPLA.

Which control boards does MA5800 use?

MPLA / MPLB
Provides system control, switching, clock processing, security, and uplink interfaces (GE/10GE).

Additional information

Weight 3.0000 kg
MA5800

Reviews

  1. Miguel –

    It is very compatible with my MA5800X15, with high-cost performance, a very good partner.

Add a review

Your email address will not be published. Required fields are marked *

90  −    =  85

Related products
Quick view
Categories1:

Huawei MA5800-X7

R.F.Q
(15)
SKU5196
Quick view
Categories1:

H901PISB

R.F.Q
(1)
PN03032FRP
Quick view
Categories1:

H901XSHF

R.F.Q
(1)
SKU10630
Quick view
Categories1:

H901CSHF

R.F.Q
(10)
PN03025AJA
Quick view
Categories1:

H901MPLB

R.F.Q
(3)
PN03022RWC
Quick view
Categories1:

H901GPHF

R.F.Q
(6)
PN03022SQW
Main Menu
Back to Top

Search For Products

Popular
Product has been added to your cart