ME0D00E2NC78

2 Reviews Write a review
PN03032XVG
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Original price was: $0.00.Current price is: $0.00.

2-Port 100GBase-CFP2 Flexible Card(BP481)

Description

ME0M0E2NFB71 Overview

2-Port 100GBase-CFP2 Flexible Card(BP481)

Mapping products and versions
Product Motherboard Minimum Version Requirement for Flexible Card
ME60X8 Flexible Card Broadband Service Unit(BSUF-481,2 sub-slots) V800R011C00
ME60X16 Flexible Card Broadband Service Unit(BSUF-481,2 sub-slots) V800R011C00
ME60X8A

Flexible Card Broadband Service Unit(BSUF-481,2 sub-slots)

V800R011C00
ME60X16A

Flexible Card Broadband Service Unit(BSUF-481,2 sub-slots)

V800R011C00
ME0D00E2NC78 Datasheet
Item ME0D00E2NC78
Line-Rate capability Provides two 100GE interfaces for line-rate transmitting and receiving.
Whether breakout is supported

No

Reliability and availability Hot swappable.
Restrictions and remarks

Not support interfaces split and the optical module that needs to be enabled with FEC is not supported.This subcard equipped with an ACACIA colored optical module (BOM number: 34061519) has no special precautions when installed on an X8A or X16A device. When installed on an X8 or X16 device, the maximum temperature of the device is limited to 40°C.

Optical type supported

100Gbps CFP2 optical module

NOTE:

When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported.

Modules with the BOM number 02312AXE are not supported.

Working mode Full-duplex
Compliant standard IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP
Dimensions (H x W x D) 37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61 in.)
Typical power consumption 64.8 W
Typical heat dissipation 210.2 BTU/hour
Weight 1.1 kg (2.43 lb)
Ambient temperature Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F)

Additional information

Weight 1.7000 kg
Dimensions 36.5000 × 31.0000 × 10.0000 cm
ME60 BRAS

ME0D00E2NC78 Datasheet
Item ME0D00E2NC78
Line-Rate capability Provides two 100GE interfaces for line-rate transmitting and receiving.
Whether breakout is supported

No

Reliability and availability Hot swappable.
Restrictions and remarks

Not support interfaces split and the optical module that needs to be enabled with FEC is not supported.This subcard equipped with an ACACIA colored optical module (BOM number: 34061519) has no special precautions when installed on an X8A or X16A device. When installed on an X8 or X16 device, the maximum temperature of the device is limited to 40°C.

Optical type supported

100Gbps CFP2 optical module

NOTE:

When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported.

Modules with the BOM number 02312AXE are not supported.

Working mode Full-duplex
Compliant standard IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP
Dimensions (H x W x D) 37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61 in.)
Typical power consumption 64.8 W
Typical heat dissipation 210.2 BTU/hour
Weight 1.1 kg (2.43 lb)
Ambient temperature Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F)

Reviews

  1. Alan

    It is the best effective device I bought so far, I will keep working with telecomate.com.

  2. Chris

    I highly recommend it! It has been functioning flawlessly.

Add a review

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart