$0.00 Original price was: $0.00.Current price is: $0.00.
8-Port 50G/4-Port 100GBase-QSFP28 Flexible Card(BP1T)
8-Port 50G/4-Port 100GBase-QSFP28 Flexible Card(BP1T)
| Product | Motherboard | Minimum Version Requirement for Flexible Card |
| ME60–X8A |
Flexible Card Broadband Service Unit(BSUF-1T,2 sub-slots) Flexible Card Multi Service Unit(MSUF-1T,2 sub-slots) |
V800R012C00 |
| ME60–X16A |
Flexible Card Broadband Service Unit(BSUF-1T,2 sub-slots) Flexible Card Multi Service Unit(MSUF-1T,2 sub-slots) |
V800R012C00 |
| Item | ME0DE4NE8V70 |
| Line-Rate capability | Supports 400G line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Whether breakout is supported |
Yes To enable breakout interfaces, run the port split command to complete breakout configuration. |
| Restrictions and remarks |
1. Even-numbered interfaces (interfaces 0, 2, 4, and 6) can work in 4x10GE breakout, 40GE, 50GE, or 100GE mode,50GE default,the working mode can be switched to 50GE/100GE using a port-speed command and be switched to 40GE/4x10GE breakout using a port split command. Odd-numbered interfaces (interfaces 1, 3, 5, and 7) can work only in 50GE mode. 2. If an even-numbered interface works in 4x10GE breakout, 40GE, or 100GE mode, the following odd-numbered 50GE interface cannot work. For example: If interface 0 works in 4x10GE breakout, 40GE, or 100GE mode, interface 1 cannot work. If interface 0 works in 50GE mode, interface 1 can work in 50GE mode. Interfaces 2 and 3, interfaces 4 and 5, and interfaces 6 and 7 comply with the same restrictions. 3. The four 10GE interfaces split from the same QSFP+ interface must all work in the same mode, either WAN or LAN mode. Mixed use of 10GE WAN and 10GE LAN modes is not allowed. 10GE WAN interfaces support only the master clock mode. The default transmission rate of an interface on the subcard is 50 Gbit/s. When the transmission rate of the used optical module does not match the default interface rate, for example, when a 40G optical module is used, run the port split command on the board interface to implement the interface breakout function. 4.When the 02312NCX optical module is installed on the board, the long-term operating temperature of the optical module ranges from 0°C (32°F) to 45°C (113°F). When the 02312MLF optical module is installed on the board, the long-term operating temperature of the optical module ranges from 0°C (32°F) to 45°C (113°F). |
| Optical type supported |
40Gbps QSFP+ optical module 100Gbps QSFP28 optical module |
| Working mode | Full-duplex |
| Compliant standard | IEEE 802.3 |
| Frame format | Ethernet_II, Ethernet_SAP and Ethernet_SNAP |
| Dimensions (H x W x D) | 37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61 in.) |
| Typical power consumption | 64.4 W |
| Typical heat dissipation | 208.9 BTU/hour |
| Weight | 0.9 kg (1.98 lb) |
| Ambient temperature | Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F) |
| Weight | 1.7000 kg |
|---|---|
| Dimensions | 36.5000 × 31.0000 × 10.0000 cm |
| ME60 BRAS |
| Item | ME0DE4NE8V70 |
| Line-Rate capability | Supports 400G line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Whether breakout is supported |
Yes To enable breakout interfaces, run the port split command to complete breakout configuration. |
| Restrictions and remarks |
1. Even-numbered interfaces (interfaces 0, 2, 4, and 6) can work in 4x10GE breakout, 40GE, 50GE, or 100GE mode,50GE default,the working mode can be switched to 50GE/100GE using a port-speed command and be switched to 40GE/4x10GE breakout using a port split command. Odd-numbered interfaces (interfaces 1, 3, 5, and 7) can work only in 50GE mode. 2. If an even-numbered interface works in 4x10GE breakout, 40GE, or 100GE mode, the following odd-numbered 50GE interface cannot work. For example: If interface 0 works in 4x10GE breakout, 40GE, or 100GE mode, interface 1 cannot work. If interface 0 works in 50GE mode, interface 1 can work in 50GE mode. Interfaces 2 and 3, interfaces 4 and 5, and interfaces 6 and 7 comply with the same restrictions. 3. The four 10GE interfaces split from the same QSFP+ interface must all work in the same mode, either WAN or LAN mode. Mixed use of 10GE WAN and 10GE LAN modes is not allowed. 10GE WAN interfaces support only the master clock mode. The default transmission rate of an interface on the subcard is 50 Gbit/s. When the transmission rate of the used optical module does not match the default interface rate, for example, when a 40G optical module is used, run the port split command on the board interface to implement the interface breakout function. 4.When the 02312NCX optical module is installed on the board, the long-term operating temperature of the optical module ranges from 0°C (32°F) to 45°C (113°F). When the 02312MLF optical module is installed on the board, the long-term operating temperature of the optical module ranges from 0°C (32°F) to 45°C (113°F). |
| Optical type supported |
40Gbps QSFP+ optical module 100Gbps QSFP28 optical module |
| Working mode | Full-duplex |
| Compliant standard | IEEE 802.3 |
| Frame format | Ethernet_II, Ethernet_SAP and Ethernet_SNAP |
| Dimensions (H x W x D) | 37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61 in.) |
| Typical power consumption | 64.4 W |
| Typical heat dissipation | 208.9 BTU/hour |
| Weight | 0.9 kg (1.98 lb) |
| Ambient temperature | Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F) |
.svg)
.svg)
Reviews
There are no reviews yet.