OLT configuration assistance
Huawei SmartAX MA5800 series OLT products include the MA5800-X17, MA5800-X15, MA5800-X7, and MA5800-X2.
It supports GPON, XG-PON, XGS-PON, XG-PON&GPON combo, XGS-PON&GPON combo, Flex-PONGE, 10GE, and other interfaces. Today, I’d like to share a case with you.
Product Model: SmartAX MA5800-X2
Problem Description:
The user wants to connect all VLAN of the two routers.
RouterA port connected to ONT A is configured trunk(all VLAN are allowed)
RouterB port connected to ONT B is configured trunk(all VLAN are allowed)
Topology:
Problem Analysis:
- So you want VLAN 4001 to 4071 connected to each other between ONT A and ONT B ?
-yes
- On the OLT uplink port, what is the VLAN? one tag or double-tagged ?
-VLAN 100(data) & VLAN3800(Management)
Root Cause:
The user needs an assistant to configure as their requirement.
Solution Description:
Provide configuration sample as below :
dba-profile add profile-id 10 profile-name test type3 assure 102400max 1024000 ont-srvprofile gponprofile-id 10 ont-port eth adaptive port vlan eth 1transparent // set the ONT port transparent all the vlan . port vlan eth 2 transparent commit quit ont-lineprofile gponprofile-id 10 mapping-modeport //set the gemport mapping mode to the ont port tcont 1dba-profile-id 10 gem add 1 eth tcont 1 gem mapping 1 0 eth1 //mapping gemport to the ONT lan port 1 commit quit // createvlan (200) and allow service from router can communication in this vlan vlan 200 vlan 100 vlan service-profileprofile-id 10 user-bridging enable commit quit vlan bind service-profile200 profile-id 10 interface gpon 0/4 ont add 0 0 sn-auth485754433A6FF230 omci ont-lineprofile-id 10 ont-srvprofile-id 10 quit service-port 100 vlan 100gpon 0/4/0 ont 0 gemport 1 multi-service user-vlan 100 tag-transform translate //Internetvlan 100 from router side can send to uplink device directly . service-port 101 vlan 200gpon 0/4/0 ont 0 gemport 1 multi-service user-vlan other-all //other vlans add one more vlan tag 200 , andin vlan 200 allow them communication.
