Description
Item | S2352P-EI-AC |
Fixed port | 48 10/100Base-T ports, 2 100/1000Base-X SFP ports, and 2 1000Base-X SFP ports |
Processor | Dominant frequency: 200 MHz |
Switching capacity | 17.6 Gbit/s |
Forwarding performance | 13.2 Mpps |
DDR memory | 128 MB |
Flash Memory | 32 MB |
Backplane switching capacity | 32 Gbit/s |
MAC address table | Supports 8K MAC address entries. |
Supports manual addition and deletion of a MAC address table. | |
Supports con?guration of MAC address aging time. | |
Supports disabling of MAC address learning based on port or aggregation group. | |
Supports limit on the number of MAC addresses to be learned on a port. | |
Supports blackhole MAC addresses. | |
VLAN features | Supports IEEE 802.1Q (VLAN) and 4096 VLANs. |
Supports port-based VLAN. | |
Supports MAC-based VLAN. | |
Supports basic QinQ. | |
Supports 1:1 VLAN switching. | |
Supports N:1 VLAN switching. | |
QoS | Supports port rate limit and traffic rate limit. |
Supports four queues with different priorities on each port. | |
Supports mapping of packets to different queues based on 802.1p. | |
Supports multiple algorithms including SP, WRR, and SP+WRR. | |
Supports traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, Layer-4 port number,protocol type, VLAN ID, Ethernet frame protocol type, and CoS.protocol type, and CoS. | |
Supports traffic-based priority marking and packet redirection. | |
IPv6 features | Supports IPv6 host functions. |
Supports static route configuration. | |
Supports IPv6 ACL. | |
Supports MLD v1/v2 snooping | |
Multicast | Supports IGMP v1/v2/v3 snooping. |
Supports multicast load sharing among bundled ports. | |
Supports port-based multicast rate limit and traffic statistics. | |
Port mirroring | Supports 1:1 or N:1 port mirroring. |
Supports Remote Switched Port | |
Analyzer (RSPAN) and traffic-based mirroring. | |
Supports packet forwarding on an observing port. | |
Security | Supports IEEE 802.1X authentication and the limit on the maximum number of users on a port. |
Supports dynamic ARP detection. | |
Supports IP Source Guard. | |
Supports multiple authentication methods including AAA, RADIUS, HWTACACS+, and NAC. | |
Supports binding of the IP address,MAC address, port number, and VLAN ID. | |
Support port rate limit. | |
Supports port isolation, port security, and sticky MAC. | |
Supports packet filtering. | |
Supports packet filtering based on MAC addresses. | |
Supports suppression of multicast, broadcast, and unknown single-cast packets. | |
Supports limit on the number of MAC addresses to be learned. | |
Supports CPU protection. | |
Surge protection | Each port has a surge protection capability of 6 KV. Each port has a surge protection capability of 15 KV after an extra surge protection device is added. |
Management and maintenance | Supports iStack |
Supports automatic configuration. | |
Supports CLI configuration. | |
Supports remote configuration and maintenance by using Telnet. | |
Supports SNMP v1/v2/v3. | |
Supports RMON. | |
Supports HGMP v2. | |
Supports SSH v2. | |
Supports Web management. | |
Supports GVRP. | |
Operating environment | Operating temperature: 0°C to 50°C (long term); –5°C to 55°C (short term); relative humidity: 10% to 90% (non-condensing) |
Power supply | AC: Rated voltage: 100 V to 240 V, 50/60 Hz Maximum voltage: 90 V to 264 V, 50/60 Hz |
Dimensions (mm) | 442 (W) x 220 (D)x 43.6 (H) |
Weight | < 3.5 kg |
Power consumption | < 38 W |
Andrei –
Nice switch. Delivery fast and good service.