S5328C-HI

24 10/100/1000BASE-T ports, 2 power slots, 1 extension slot, without power module
AvailabilityOut of stock
PN
02352763
$0.00
Item Description
Fixed port 24 10/100/1000Base-T ports
Extended slot provides an extended slot for an uplink subcard
Forwarding performance 96 Mpps
VLAN 4K VLANs
Guest VLAN and voice VLAN
GVRP
MUX VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN mapping
VLAN-based transparent transmission of protocol packets
MPLS MPLS, MPLS VLL,L3VPN
VPLS Martini VPLS
IP routing Static routing, RIPv1, RIPv2, OSPF, IS-IS, BGP, and ECMP
IPv6 features Neighbor Discovery (ND)
Path maximum transmission unit (PMTU)
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet
6 to4 tunnel, ISATAP tunnel, and manually configur ed tunnel
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types
Multicast Listener Discovery (MLD) v1/v2 snooping
Multicast forwarding IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load splitting among trunk member ports
Controllable multicast
Port-based multicast traffic statistics collection
IGMPv1/v2/v3, Protocol Independent Multicast Sparse Mode (PIM-SM), and Protocol Independent
Multicast Dense Mode (PIM-DM), and Protocol Independent Multicast Source-Specific Multicast (PIM-SSM)
Multicast Source Discovery Protocol (MSDP)
QoS/ACL Rate limiting on packets sent and received by an interface
Packet redirection
Broadcast storm control
Port-based traffic policing and two-rate three-color CAR
Eight queues per port
WRR, DRR, PQ, WRR+PQ, and DRR+PQ queue scheduling algorithms
Re-marking of the 802.1p priority and DSCP value of packets
Packet filtering based on Layer 2 to Layer 4 information, includi ng source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UCD source/destination ports, protocol types, and VLAN IDs
Rate limiting in each queue and traffic shaping on ports
Security
features
User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface number, and VLAN ID of a user
Port isolation, port security, and sticky MAC
MAC Forced Forwarding (MFF)
Blackhole MAC address entries
Limit on the number of learned MAC addresses
IEEE 802.1x authentication and the limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
SSH v2.0
CPU defense; Blacklist and whitelist
Reliability RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
SEP
ERPS(G.8032 v2)
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)
BPDU protection, root protection, and loop protection
E-Trunk
OAM

Hardware implementation

EFM OAM

CFM OAM

Y.1731 performance test supports hardware-level delay and jitter detection

Management
and
Maintenance
MAC Forced Forwarding (MFF)
Virtual cable test
Port mirroring and RSPAN (remote port mirroring)
Remote configuration and maintenance by using Telnet
SNMP v1/v2/v3, RMON, Web NMS, GVRP, MUX VLAN, 802.3az EEE
System logs and alarms of different levels
Operating environment Operating temperature: 0 O C–50 O C (long term); -5 O C–55 O C (short term)
Relative humidity: 10%–90% (non-condensing
Input voltage

AC:

Rated voltage range: 100 V to 240 V AC, 50/60 Hz

Maximum voltage range: 90 V to 264 V AC, 50/60 Hz

DC:

Rated voltage range: –48 V to –60 V, DC

Maximum voltage range: –36 V to –72 V, DC

Dimensions (mm) 442 (W) x 220 (D)x 43.6 (H)
Typical power
consumption
< 76 W 

 

 

 

Write Your Own Review
You're reviewing:S5328C-HI
Your Rating