.svg)
.svg)
Description
| Item | S5710-108C-PWR-HI |
| Fixed ports | 48 x 10/100/1000 Base-T, 8 x 10 GE SFP+ ports |
| Extended slots | 3 front extended slots: |
| Optional subcard 1: | |
| 16 x 10/100/1000 Base-T | |
| Optional subcard 2: | |
| 16 x 1000 Base-X | |
| 1 rear extended slot: | |
| Optional subcard 1: 4 x 10 GE SFP+ (no GE auto adaption) | |
| Optional subcard 2: 4 x 40 GE QSFP+ | |
| MAC address table | IEEE 802.1d compliance |
| 456K MAC address entries | |
| MAC address learning and aging | |
| Static, dynamic, and blackhole MAC address entries | |
| Packet filtering based on source MAC addresses | |
| VLAN | 4K VLANs |
| Guest VLAN and voice VLAN | |
| GVRP | |
| MUX VLAN | |
| VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
| 1:1 and N:1 VLAN Mapping | |
| Reliability | RRPP ring topology and RRPP multi-instance |
| Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
| SEP | |
| ERPS(G.8032) | |
| BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM | |
| STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) | |
| BPDU protection, root protection, and loop protection | |
| MPLS features | MPLS L3VPN |
| MPLS L2VPN(VPWS/VPLS) | |
| MPLS-TE | |
| MPLS QoS | |
| IP routing | Static routing, RIPv1/v2, OSPF, IS-IS, BGP, and ECMP |
| IPv6 features | Neighbor Discovery (ND) |
| Path MTU (PMTU) | |
| IPv6 ping, IPv6 tracert | |
| 6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
| ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
| IPv6 Static routing, RIPng, OSPFv3, IS-ISv6, BGP4+, and ECMP | |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave |
| MLD v1/v2 snooping | |
| Multicast forwarding in a VLAN and multicast replication between VLANs | |
| Multicast load balancing among member ports of a trunk | |
| Controllable multicast | |
| Port-based multicast traffic statistics | |
| IGMPv1/v2/v3, MLDv1/v2, PIM-SM, PIM-DM, PIM-SSM, and MSDP | |
| QoS/ACL | Rate limiting on packets sent and received by an interface |
| Packet redirection | |
| Port-based traffic policing and two-rate three-color CAR | |
| Eight queues on each port | |
| WRR, DRR, PQ, WRR + PQ, and DRR + PQ queue scheduling algorithms | |
| WRED | |
| Re-marking of the 802.1p priority and DSCP priority | |
| Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID | |
| Rate limiting in each queue and traffic shaping on ports | |
| Security | User privilege management and password protection |
| DoS attack defense, ARP attack defense, and ICMP attack defense | |
| Binding of the IP address, MAC address, interface, and VLAN | |
| Port isolation, port security, and sticky MAC | |
| Blackhole MAC address entries | |
| Limit on the number of learned MAC addresses | |
| 802.1x authentication and limit on the number of users on an interface | |
| AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC | |
| SSH v2.0 | |
| Hypertext Transfer Protocol Secure (HTTPS) | |
| CPU defense | |
| Blacklist and whitelist | |
| OAM | Hardware OAM: |
| EFM OAM | |
| CFM OAM | |
| Y.1731 performance test (hardware-level delay and jitter detection) | |
| Management and maintenance | iStack |
| MAC Forced Forwarding (MFF) | |
| Virtual cable test | |
| SNMP v1/v2c/v3 | |
| RMON | |
| Web-based NMS | |
| System logs and alarms of different levels | |
| 802.3az EEE | |
| sFlow | |
| NetStream | |
| Dying gasp | |
| Operating environment | Operating temperature: 0℃ to 50℃ |
| Relative humidity: 5% to 95% (non-condensing) | |
| Input voltage | AC: |
| Rated voltage range: 100V to 240V AC, 50/60 Hz | |
| Maximum voltage range: 90V to 264V AC, 50/60 Hz | |
| DC: | |
| Rated voltage range: –48V to –60V, DC | |
| Maximum voltage range: –36V to –72V, DC | |
| Dimensions (W x D x H) | 442 mm x 220 mm x 43.6 mm |
| Power consumption | < 80W |
Reviews
There are no reviews yet.