Huawei S5730-60C-HI-48S switch supports 48 GE SFP ports, 4 10GE SFP+ ports, 2 hot swappable AC/DC power supplies, without power supply equipped

SKU: 02351XFS Category: Tags: ,


S5730-60C-HI-48S Overview

S5730-60C-HI-48S is a Huawei S5730-HI switch, providing 48 GE SFP ports, 4 x 10 GE SFP+ ports, 1 expansion slot, without power module. Huawei S5730-HI gigabit Ethernet switches are Huawei-developed next-generation agile switches that provide fixed full gigabit access and 10 GE uplink interfaces as well as one or two slots for uplink interface extension. The switches are developed based on Huawei Versatile Routing Platform (VRP) to implement software definition and service change on demand. With services and network convergence as the core, the switches provide the free mobility function to ensure consistent user experience. The Super Virtual Fabric (SVF) function virtualizes the entire network into one device. In addition, the switches support flexible Ethernet networking, comprehensive VPN tunnel solutions, various security control methods, intelligent deployment, and simple Operations and Maintenance (O&M). The S5730-HI series switches are the best choices for the access or aggregation layers of medium and large-sized campus networks, and the core layer of branch or small campus networks.

Telecomate.com provides a full range of Huawei switch series, if you have any demands, please contact: [email protected]

S5730-60C-HI-48S Quick Spec

48 GE SFP ports, 4 10 GE SFP+ ports

Switching capacity is 758 Gbps

S5730-60C-HI-48S appearance and structure


1 Forty-eight 100/1000BASE-X ports 8 ESN label
2 Four 10GE SFP+ ports 9 SSD card slot
3 One ETH management port 10 Rear card slot
4 One PNP button 11 Fan slot
5 One console port 12 Power module slot 2
6 One USB port 13 Power module slot 1
7 Ground screw
S5730-60C-HI-48S Datasheet
Item S5730-60C-HI-48S
Fixed ports 48 GE SFP, 4 10GE SFP+ ports
Extended slot One extended slot, supporting 8-port 10GE electrical, 8-port 10GE optical, or 2-port 40GE optical interface card
Switching capacity 758 Gbit/s
Input voltage AC:

Rated AC voltage: 100-240 V AC; 50/60 Hz

Max AC voltage: 90-264 V AC; 47-63 Hz


Rated DC voltage: -48-60 V DC;

Max DC voltage: -38.4-72 V DC

Maximum power consumption (without card) 100 W
Operating temperature 0-1800 m altitude: 0°C to 45°C 1800-5000 m altitude: The operating temperature reduces by 1ºC every time the altitude increases by 220 m.
Relative humidity 5% to 95% (non-condensing)
Heat dissipation Air cooling heat dissipation and intelligent speed adjustment

Guest VLAN and voice VLAN



VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

VLAN mapping

Wireless service AP access control, AP domain management, and AP configuration template management

Radio management, unified static configuration, and dynamic centralized management

WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis

Ethernet loop protection RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover


ERPS (G.8032)

BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

BPDU protection, root protection, and loop protection





IP routing Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy
Interoperability VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST

Link-type Negotiation Protocol (LNP), similar to DTP

VLAN Central Management Protocol (VCMP), similar to VTP

IPv6 features Neighbor Discover (ND)


IPv6 Ping, IPv6 Tracert, IPv6 Telnet

ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types

Multicast Listener Discovery snooping (MLDv1/v2)

IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN

Multicast IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk Controllable multicast

Port-based multicast traffic statistics

IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM



QoS/ACL Rate limitation in the inbound and outbound directions of a port

Packet redirection

Port-based traffic policing and two-rate three-color CAR Eight queues on each port

DRR, SP and DRR+SP queue scheduling algorithms


Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Queue-based rate limitation and shaping on ports

Security Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC

MAC Forced Forwarding (MFF) Blackhole MAC address entries

Limit on the number of learned MAC addresses

IEEE 802.1x authentication and limit on the number of users on a port

AAA authentication, RADIUS authentication, and HWTACACS authentication


SSH V2.0

HTTPS CPU protection

Blacklist and whitelist

Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets

Secure Boot


Reliability LACP


Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag)




BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static route

VXLAN Supports VXLAN L2 and L3 gateways

Centralized and distributed gateway


Configured through the NETCONF protocol

Super Virtual Fabric (SVF) Working as an SVF Parent node to vertically virtualize downlink switches and APs as one device for management. A two-layer client architecture is supported.

IGMP snooping can be enabled on access switches (ASs) and the maximum number of access users on a port can be configured.

ASs can be independently configured. Services that are not supported by templates can be configured on the parent. Third-party devices are allowed between SVF parent and clients.

Working as an SVF Client node that is plug-and-play with zero configuration

iPCA Directly coloring service packets to collect real-time statistics on the number of lost packets and packet loss ratio

Collection of statistics on the number of lost packets and packet loss ratio at network and device levels

TWAMP Two-way IP link performance measurement

Measurement on two-way packet delay, one-way packet loss rate, and one-way packet jitter

Management and maintenance iStack

Virtual cable test

SNMP v1/v2c/v3


Web-based NMS System logs and alarms of different levels GVRP


802.3az Energy Efficient Ethernet (EEE)


Dying gasp upon power-off

Dimensions mm (W×D ×H) 442×420×44.4

Additional information

Weight 20.0000 kg
Dimensions 71.5000 × 57.0000 × 23.0000 cm

1 review for S5730-60C-HI-48S

  1. 5 out of 5


    The price is competitive and Telecomate is a reliable seller,

Add a review

has been added to your cart: