- Reviews (0)
The Huawei S5731-S24N4X2Q-A switch comes with 24*100M/1G/2.5G Ethernet ports, 4*10GE SFP+ ports, 2*40GE QSFP ports, AC power, front access.
The S series fixed Ethernet switches integrate the access and transmission functions to provide reliable access/aggregation and high-quality transmission of services on enterprise networks. The switches are built on an integrated hardware platform, and the hardware system consists of the chassis, power module, fan module, extended cards, and Switch Control Unit (SCU).
Basic information about the S5731-S24N4X2Q-A
|Description||S5731-S24N4X2Q-A(24*100M/1G/2.5G Ethernet ports, 4*10GE SFP+ ports, 2*40GE QSFP ports, AC power, front access)|
|First supported version||V200R022C00|
|1||Twenty-four 100M/1000M/2.5GE BASE-T ports (multi-GE ports)||2||Four 10GE SFP+ ports|
|3||Two 40GE QSFP+ ports||4||One ETH management port|
|5||One console port||6||One USB port|
|7||One PNP button||8||AC socket|
Ports on the S5731-S24N4X2Q-A
|Port||Connector Type||Description||Available Components|
|100M/1000M/2.5GE BASE-T port (multi-GE port)||RJ45||A 100M/1000M/2.5GE BASE-T port (multi-GE port) sends and receives service data at 100 Mbit/s, 1 Gbit/s, 2.5 Gbit/s.||If the 2.5 Gbit/s speed is required, the port must use an Ethernet cable of Cat5e or higher category.|
|10GE SFP+ optical port||SFP+||A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.||
|40GE SFP+ optical port||QSFP+||A 40GE QSFP+ optical port sends and receives service traffic at 40 Gbit/s.
A 40GE QSFP+ optical port can be split into four 10GE ports.
|Console port||RJ45||The console port is connected to a console for on-site configuration.||Console cable|
|ETH management port||RJ45||You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely.
You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port.
|USB port||USB 2.0 Type A||The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.
USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.
|USB flash drive|
|Typical power consumption [W]||106 W|
|Typical heat dissipation [BTU/hour]||361.69 BTU/hour|
|Maximum power consumption [W]||134 W|
|Maximum heat dissipation [BTU/hour]||457.23 BTU/hour|
|Static power consumption [W]||70 W|
|MTBF [year]||40.40 year|
|MTTR [hour]||2.97 hour|
|Noise at normal temperature (acoustic power) [dB(A)]||43.70 dB(A)|
|Noise at normal temperature (acoustic pressure) [dB(A)]||31.70 dB(A)|
|Number of card slots||0|
|Number of power slots||0|
|Number of fans modules||2|
|Redundant power supply||Not supported|
|Long-term operating temperature [°C(°F)]||–5°C to +45°C (23°F to 113°F) at an altitude of 0 to 1800 m (0 to 5905.44 ft.)|
|Short-term operating temperature [°C(°F)]||-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)|
|Restriction on the operating temperature variation rate [°C(°F)]||When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
The device can work for a short period of time when the operating temperature is beyond the normal range, but the following conditions must be met:
If any of the preceding conditions is not met, the device may be damaged or an unknown error may occur.
Devices cannot start when the temperature is lower than 0°C (32°F). The maximum transmission distance of an optical module used for short-term operation cannot exceed 10 km.
|Storage temperature [°C(°F)]||–40°C to +70°C (–40°F to +158°F)|
|Long-term operating relative humidity [RH]||5% RH to 95% RH (non-condensing)|
|Long-term operating altitude [m(ft.)]||0–5000 m (0–16404 ft.)|
|Storage altitude [m(ft.)]||0-5000 m (0-16404 ft.)|
|Power supply mode||AC built-in|
|Rated input voltage [V]||AC input: 100–240 V AC; 50/60 Hz|
|Input voltage range [V]||AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz|
|Maximum input current [A]||3 A|
|Flash memory||1 GB in total. To view the available flash memory size, run the display version command.|
|Eth Management port||RJ45|
|RPS input||Not supported|
|Service port surge protection [kV]||Common mode: ±7 kV|
|Power supply surge protection [kV]||Differential mode: ±6 kV; common mode: ±6 kV|
|Types of fans||Built-in|
|Heat dissipation mode||Air cooling for heat dissipation, intelligent fan speed adjustment|
|Airflow direction||Air intake from left and front, air exhaustion from right|
|Dimensions without packaging (H x W x D) [mm(in.)]||Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.)
Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 236.0 mm (1.72 in. x 17.4 in. x 9.29 in.)
|Dimensions with packaging (H x W x D) [mm(in.)]||90 mm x 547 mm x 357 mm (3.54 in. x 21.54 in. x 14.06 in.)|
|Chassis height [U]||1 U|
|Weight without packaging [kg(lb)]||4.76 kg (10.49 lb)|
|Weight with packaging [kg(lb)]||5.4 kg(lb)|