- Description
- DATASHEET
- Packing info
- Comparation
- Reviews (0)
Description
S9706 overview
Huawei S9706 switch is one of the S9700 series switches, which comes with 6 service card slots.
The S9700 series core routing switches (S9700 for short) are high-end switches designed for service integration in next-generation campus networks and data centers. Based on Huawei Versatile Routing Platform (VRP), the S9700 switches provide high-performance L2/L3 switching and integrate a range of services, such as MPLS VPN, hardware IPv6, desktop cloud, video conferencing, and wireless access. They also provide a variety of reliability technologies including hardware OAM/BFD and ring network protection. These improve the network efficiency and maximize the normal operation time, thereby reducing the total cost of ownership (TCO).
The S9700 comes in the following models: S9703, S9706, and S9712. These models support a maximum of 3, 6, and 12 line processing units (LPUs), respectively.
S9706 appearance
1. Three of the following service cards can be installed:
|
2. Two MPUs | 3. A pair of mounting brackets |
| 4. Two power modules | 5. Two EH1D200CMU00-Centralized Monitoring Unit | 6. Reserved slot |
| 7. Front ESD jack | 8. Cable management frames |
| Item | S9706 |
| Switching capacity | 6.72/14.72 Tbit/s |
| Packet forwarding rate |
2880/5040 Mpps |
| Service slots | 6 |
| Wireless network management |
Native AC |
| AP access control, AP region management, and AP profile management | |
| Radio profile management, uniform static configuration, and centralized dynamic management |
|
| Basic WLAN services, QoS, security, and user management | |
| User management | unified user management |
| 802.1x, MAC address, and Portal authentication | |
| Traffic- and time-based accounting | |
| User authorization based on user groups, domains, and time ranges | |
| iPCA quality awareness | Marking real service packets to obtain real-time count of dropped packets and packet loss ratio |
| Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks | |
| SVF virtualization | Virtualizing access switches (ASs) and APs into one logical device to simplify management and maintenance |
| Two layers of ASs allowed in an SVF system | |
| Third-party devices allowed between SVF parent and clients | |
| VLAN | Supports adding access, trunk, and hybrid interfaces to VLANs |
| Supports the default VLAN | |
| Supports VLAN switching | |
| Supports QinQ and selective QinQ | |
| Supports MAC address-based VLAN assignment | |
| MAC address | Supports automatic learning and aging of MAC addresses |
| Supports static, dynamic, and blackhole MAC address entries | |
| Supports packet filtering based on source MAC addresses | |
| Supports MAC address limiting based on ports and VLANs | |
| STP/ERPS | Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
| Supports BPDU protection, root protection, and loop protection | |
| Supports BPDU tunnel | |
| ERPS (G.8032) | |
| IP routing | Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
| Supports IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and BGP4+ |
|
| Multicast | Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snooping |
| Supports PIM-SM, PIM-DM, PIM-SSM | |
| Supports MSDP, MBGP | |
| Supports prompt leave | |
| Supports multicast traffic control | |
| Supports multicast querier | |
| Supports suppression on multicast packets | |
| Supports multicast CAC, ACL | |
| MPLS | Supports basic MPLS functions |
| Supports MPLS OAM | |
| Supports MPLS OAM | |
| Supports MPLS VPN/VLL/VPLS | |
| Reliability | Supports LACP and E-Trunk |
| Supports VRRP and BFD for VRRP | |
| Supports BFD for BGP/IS-IS/OSPF/static route | |
| Supports NSF, and GR for BGP/IS-IS/OSPF/LDP | |
| Supports TE FRR and IP FRR | |
| Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware level) | |
| Supports ITU-Y.1731 | |
| Supports DLDP | |
| Supports In-Service Software Upgrade (ISSU) | |
| QoS | Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
| Supports actions of ACL, CAR, re-mark, and schedule | |
| Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR |
|
| Supports congestion avoidance mechanisms, such as WRED and tail drop | |
| Supports H-QoS | |
| Supports traffic shaping | |
| Configuration and maintenance | Supports console, telnet, and SSH terminals |
| Supports the network management protocols, such as SNMP v1/v2c/v3 | |
| Supports file uploading and downloading using FTP and TFTP | |
| Supports BootROM upgrade and remote upgrade | |
| Supports hot patches | |
| Supports user operation logs | |
| Security and management | Supports 802.1x authentication and Portal authentication |
| Supports NAC | |
| Supports RADIUS and HWTACACS authentication for login users | |
| Supports command line authority control based on user levels, preventing unauthorized users from using commands |
|
| Supports defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks | |
| Supports 1K CPU queues | |
| Supports ping and traceroute functions based on ICMP packets | |
| Supports remote network monitoring | |
| Value-added services | Supports firewall |
| Supports NAT | |
| Supports NetStream | |
| Supports IPSec | |
| Supports load balancing | |
| Supports wireless AC | |
| Supports IPS | |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
| Supports LNP (Similar to DTP) | |
| Supports VCMP (Similar to VTP) | |
| Energy saving | Supports IEEE 802.3az: Energy Efficient Ethernet (EEE) |
| Dimensions(W x D x H) | 442 mm × 476 mm ×442 mm |
| Chassis weight(empty) | < 30 kg |
| Operating voltage | DC: –38.4 V to –72 V AC: 90 V to 290V |
| Power supply capability of the equipment |
4400W |
Additional information
| Weight | 50.0000 kg |
|---|---|
| Dimensions | 63.8000 × 61.2000 × 63.2000 cm |
| Chassis Model | Description |
| S9703 | Supports two Main Control Units (MCUs), three Line Processing Units (LPUs), and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
| S9706 | Supports two Switching and Routing Units (SRUs), six LPUs, and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
| S9712 | Supports two SRUs, twelve LPUs, and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
Note: S9700 chassis include FCC-certified chassis and common chassis.
Reviews
There are no reviews yet.