TN11ECOM

0 Reviews Write a review
SKU2016990
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 6800/3800 TN11ECOM enhanced communication interface unit

Description

TN11ECOM overview

 

TN11ECOM enhanced communication interface unit applied to OptiX OSN 6800/3800 and the OptiX OSN 900A.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Front panel of the TN11ECOM board

TN11ECOM

Front panel of the TN11ECOM board

 

Valid slots for the TN11ECOM board in a OptiX OSN 6800 subrack and OptiX OSN 3800 chassis

Device Valid Slot
OptiX OSN 6800 subrack IU1-IU8, IU11-IU16
OptiX OSN 3800 chassis IU2-IU5

 

Item TN11ECOM
Basic function
  • Achieves the DCN communication between the OptiX OSN 6800/3800 and the OptiX OSN 900A.
  • Converges/deconverges 8xFE services to/from 1xGE service.
Client-side service type FE: Ethernet service at a rate of 125 Mbit/s
WDM specification Supports the CWDM specifications.
Cross-connect capabilities
  • OptiX OSN 6800: Supports the transmission of one GE signal each to working/protection cross-connection boards respectively through the backplane. Supports the transmission of one GE signal to the paired slots through the backplane.
  • OptiX OSN 3800: Supports the grooming of one GE signal from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group.
Tunable wavelength function Not Supported
PRBS function Not Supported
Protection scheme Not Supported
Alarms and performance events monitoring
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Detects the optical power and reports the alarms and performance events for the board.
ALS function Not Supported
Test frame Not Supported
Optical-layer ASON Not Supported
Electrical-layer ASON Not Supported
eSFP Supports enhanced small form-factor pluggable optical modules on the client side. Supports enhanced small form-factor pluggable optical modules on the WDM side.
Loopback WDM side Inloop Supported
Outloop Not Supported
Client side Inloop Supported
Outloop Supported
Dimensions (H x W x D)  264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight 1.0 kg (2.2 lb.)

Additional information

Item TN11ECOM
Basic function
  • Achieves the DCN communication between the OptiX OSN 6800/3800 and the OptiX OSN 900A.
  • Converges/deconverges 8xFE services to/from 1xGE service.
Client-side service type FE: Ethernet service at a rate of 125 Mbit/s
WDM specification Supports the CWDM specifications.
Cross-connect capabilities
  • OptiX OSN 6800: Supports the transmission of one GE signal each to working/protection cross-connection boards respectively through the backplane. Supports the transmission of one GE signal to the paired slots through the backplane.
  • OptiX OSN 3800: Supports the grooming of one GE signal from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group.
Tunable wavelength function Not Supported
PRBS function Not Supported
Protection scheme Not Supported
Alarms and performance events monitoring
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Detects the optical power and reports the alarms and performance events for the board.
ALS function Not Supported
Test frame Not Supported
Optical-layer ASON Not Supported
Electrical-layer ASON Not Supported
eSFP Supports enhanced small form-factor pluggable optical modules on the client side. Supports enhanced small form-factor pluggable optical modules on the WDM side.
Loopback WDM side Inloop Supported
Outloop Not Supported
Client side Inloop Supported
Outloop Supported
Dimensions (H x W x D)  264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight 1.0 kg (2.2 lb.)

Reviews

There are no reviews yet.

Be the first to review “TN11ECOM”

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart