TN11L4G

0 Reviews Write a review
SKU2016992
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 6800/3800 TN11L4G line wavelength conversion unit with 4 x GE line capacity

Description

TN11L4G overview

 

TN11L4G line wavelength conversion unit with 4 x GE line capacity applied to OptiX OSN 6800/3800 and the OptiX OSN 900A.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Front panel of the TN11L4G board

TN11L4G

Front panel of the TN11L4G board

 

Valid slots for the TN11L4G board in a OptiX OSN 6800 subrack and OptiX OSN 3800 chassis

Device Valid Slot
OptiX OSN 6800 subrack IU1-IU8, IU11-IU16
OptiX OSN 3800 chassis IU2-IU5

 

Item TN11L4G
Basic function Converges up to six non-full bandwidth GE service signals into four GE service signals and multiplexes these four signals into an OTU 5G/FEC 5G signal. Converts the signals into standard DWDM wavelength compliant with ITU-T G.694.1. The reverse process is similar.
Client-side service type GE: Ethernet service at a rate of 1.25 Gbit/s
Cross-connect capabilities
  • OptiX OSN 6800: Supports the grooming of four channels of GE services each to working/protection cross-connection boards respectively through the backplane. Supports the transmission of four GE signals to the paired slots through the backplane.
  • OptiX OSN 3800: Supports the grooming of four GE signals from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group.
OTN function
  • Provides the OTU5G/FEC5G interface on WDM-side.
  • Supports TCM and PM functions for ODU5G.
  • Supports SM function for OTU5G.
Layer 2 switching Supports the MAC address learning and aging. Supports one VB.
WDM specification Supports the DWDM specifications.
Tunable wavelength function Supports the tunable wavelength optical module. Equipped with this module, the board can tune the optical signal output on the WDM side within the range of the 40 wavelengths in C-band with the channel spacing of 100 GHz.
ESC function Supported
PRBS test function Not supported
Port-based flow control Supports IEEE802.3X-compliant Ethernet flow control protocol and flow control termination.
NOTE:
Transparent transmission of Pause frames is not supported. When a site receives a Pause frame, it terminates the frame.
LPT function
Supported
NOTE:
The LPT function cannot be configured for EVPL services but only for bidirectional EPL services (port <->VCTRUNK). When the LPT function is enabled, Source C-VLAN and Sink C-VLAN of an EPL service must be left empty.
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Poisson mode) to help locate line failures.
  • Monitors B1 bytes to help locate faults.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports the remote monitoring (RMON) of Ethernet services.
ALS function Supports the ALS function on the client side.
NOTE:
ALS function is supported only when EPL services (port <->VCTRUNK) are provisioned.
Test frame Supported
Latency measurement Not supported
Optical-layer ASON Not supported
Electrical-layer ASON Not supported
Protection scheme
  • Supports SW SNCP.
  • Supports VLAN SNCP.
  • Supports client 1+1 protection.
  • Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
  • Supports OWSP protection.
  • Supports MS SNCP protection.
NOTE:
Client 1+1 protection is supported only when EPL services (port <->VCTRUNK) are configured on the board.
Loopback WDM side Inloop Supported
Outloop Supported
Client side MAC Inloop Supported
PHY Outloop Supported
Dimensions (H x W x D) 264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight 1.4 kg (3.1 lb.)

Additional information

Brand
Lead Time
Ship From
Warranty
Condition
Item TN11L4G
Basic function Converges up to six non-full bandwidth GE service signals into four GE service signals and multiplexes these four signals into an OTU 5G/FEC 5G signal. Converts the signals into standard DWDM wavelength compliant with ITU-T G.694.1. The reverse process is similar.
Client-side service type GE: Ethernet service at a rate of 1.25 Gbit/s
Cross-connect capabilities
  • OptiX OSN 6800: Supports the grooming of four channels of GE services each to working/protection cross-connection boards respectively through the backplane. Supports the transmission of four GE signals to the paired slots through the backplane.
  • OptiX OSN 3800: Supports the grooming of four GE signals from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group.
OTN function
  • Provides the OTU5G/FEC5G interface on WDM-side.
  • Supports TCM and PM functions for ODU5G.
  • Supports SM function for OTU5G.
Layer 2 switching Supports the MAC address learning and aging. Supports one VB.
WDM specification Supports the DWDM specifications.
Tunable wavelength function Supports the tunable wavelength optical module. Equipped with this module, the board can tune the optical signal output on the WDM side within the range of the 40 wavelengths in C-band with the channel spacing of 100 GHz.
ESC function Supported
PRBS test function Not supported
Port-based flow control Supports IEEE802.3X-compliant Ethernet flow control protocol and flow control termination.
NOTE:
Transparent transmission of Pause frames is not supported. When a site receives a Pause frame, it terminates the frame.
LPT function
Supported
NOTE:
The LPT function cannot be configured for EVPL services but only for bidirectional EPL services (port <->VCTRUNK). When the LPT function is enabled, Source C-VLAN and Sink C-VLAN of an EPL service must be left empty.
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Poisson mode) to help locate line failures.
  • Monitors B1 bytes to help locate faults.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports the remote monitoring (RMON) of Ethernet services.
ALS function Supports the ALS function on the client side.
NOTE:
ALS function is supported only when EPL services (port <->VCTRUNK) are provisioned.
Test frame Supported
Latency measurement Not supported
Optical-layer ASON Not supported
Electrical-layer ASON Not supported
Protection scheme
  • Supports SW SNCP.
  • Supports VLAN SNCP.
  • Supports client 1+1 protection.
  • Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
  • Supports OWSP protection.
  • Supports MS SNCP protection.
NOTE:
Client 1+1 protection is supported only when EPL services (port <->VCTRUNK) are configured on the board.
Loopback WDM side Inloop Supported
Outloop Supported
Client side MAC Inloop Supported
PHY Outloop Supported
Dimensions (H x W x D) 264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight 1.4 kg (3.1 lb.)

Reviews

There are no reviews yet.

Be the first to review “TN11L4G”

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart