TN11LDGS

0 Reviews Write a review
SKU2017064
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 6800/3800 TN11LDGS 2 x Gigabit Ethernet unit, single fed and single receiving

Description

TN11LDGS overview

 

TN11LDGS 2 x Gigabit Ethernet unit, single fed and single receiving applied to OptiX OSN 6800/3800.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Front panel of the TN11LDGS board

TN11LDGS

Front panel of the TN11LDGS board

 

Valid slots for the TN11LDGS board in a OptiX OSN 6800 subrack and OptiX OSN 3800 chassis

Device Valid Slot
OptiX OSN 6800 subrack IU1-IU8, IU11-IU16
OptiX OSN 3800 chassis IU2-IU5

 

Item TN11LDGS
Basic function LDGS converts signals: 2 x GE <-> 1 x OTU1/STM-16
Client-side service type GE: Ethernet service at a rate of 1.25 Gbit/s
Cross-connect capabilities
  • OptiX OSN 6800: Supports the grooming of two channels of GE services each to working/protection cross-connection boards respectively through the backplane. Supports the transmission of two GE signals to the paired slots through the backplane.
  • OptiX OSN 3800: Supports the grooming of two GE signals from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group.
OTN function
  • Provides the OTU1 interface on WDM-side.
  • Supports the OTN frame format and overhead processing by referring to the ITU-T G.709.
  • Supports PM and TCM functions for ODU1.
  • Supports SM function for OTU1.
WDM specification
  • Supports ITU-T G.694.1-compliant DWDM specifications.
  • Supports ITU-T G.694.2-compliant CWDM specifications.
Tunable wavelength function Supports the tunable wavelength optical module. Equipped with this module, the board can tune the optical signal output on the WDM side within the range of the 40 wavelengths in C-band with the channel spacing of 100 GHz.
ESC function Supported
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
PRBS test function Not supported
LPT function Supported
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Poisson mode) to help locate line failures.
  • Monitors B1 bytes to help locate faults.
  • Monitors B2 bytes to help locate faults.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports the remote monitoring (RMON) of Ethernet services.
ALS function Supports the ALS function on the client side.
Test frame Supported
Latency measurement Not supported
Optical-layer ASON Not supported
Electrical-layer ASON Not supported
Port MTU The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes.
Protection scheme
  • Supports SW SNCP.
  • Supports client 1+1 protection.
  • Supports OWSP protection.
Loopback WDM side Inloop Supported
Outloop Supported
Client side Inloop Supported
Outloop Supported
Dimensions (H x W x D) 264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight 1.2 kg (2.6 lb.)

Additional information

Item TN11LDGS
Basic function LDGS converts signals: 2 x GE <-> 1 x OTU1/STM-16
Client-side service type GE: Ethernet service at a rate of 1.25 Gbit/s
Cross-connect capabilities
  • OptiX OSN 6800: Supports the grooming of two channels of GE services each to working/protection cross-connection boards respectively through the backplane. Supports the transmission of two GE signals to the paired slots through the backplane.
  • OptiX OSN 3800: Supports the grooming of two GE signals from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group.
OTN function
  • Provides the OTU1 interface on WDM-side.
  • Supports the OTN frame format and overhead processing by referring to the ITU-T G.709.
  • Supports PM and TCM functions for ODU1.
  • Supports SM function for OTU1.
WDM specification
  • Supports ITU-T G.694.1-compliant DWDM specifications.
  • Supports ITU-T G.694.2-compliant CWDM specifications.
Tunable wavelength function Supports the tunable wavelength optical module. Equipped with this module, the board can tune the optical signal output on the WDM side within the range of the 40 wavelengths in C-band with the channel spacing of 100 GHz.
ESC function Supported
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
PRBS test function Not supported
LPT function Supported
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Poisson mode) to help locate line failures.
  • Monitors B1 bytes to help locate faults.
  • Monitors B2 bytes to help locate faults.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports the remote monitoring (RMON) of Ethernet services.
ALS function Supports the ALS function on the client side.
Test frame Supported
Latency measurement Not supported
Optical-layer ASON Not supported
Electrical-layer ASON Not supported
Port MTU The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes.
Protection scheme
  • Supports SW SNCP.
  • Supports client 1+1 protection.
  • Supports OWSP protection.
Loopback WDM side Inloop Supported
Outloop Supported
Client side Inloop Supported
Outloop Supported
Dimensions (H x W x D) 264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight 1.2 kg (2.6 lb.)

Reviews

There are no reviews yet.

Be the first to review “TN11LDGS”

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart