TN11LEX4

0 Reviews Write a review
SKU2017120
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 8800 TN11LEX4 4 x 10GE and 2 x OTU2 Ethernet Switch Board

Description

TN11LEX4 overview

 

TN11LEX4 4 x 10GE and 2 x OTU2 Ethernet Switch Board applied to OptiX OSN 8800/6800/3800.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Front panel of the TN11LEX4 board

TN11LEX4

Front panel of the TN11LEX4 board

 

Valid slots for the TN11LEX4 board in a OptiX OSN 8800/6800 T64/T32/T16 subrack 

Device Valid Slot
OptiX OSN 8800 T64 subrack IU1-IU8, IU11-IU42, IU45-IU68
OptiX OSN 8800 T32 subrack IU1-IU8, IU12-IU27, IU29-IU36
OptiX OSN 8800 T16 subrack IU1-IU8, IU11-IU18
OptiX OSN 6800 subrack IU1-IU8, IU11-IU16

 

Item TN11LEX4
OTN Functions and features of the LEX4 board
Basic function
  • Converts four channels of 10GE WAN or 10GE LAN services received directly on the client side into two channels of standard WDM wavelength OTU2 signals and performs the reverse process.If being used by the OptiX OSN 6800, the board can also converge and convert a maximum of two channels of 10GE services cross-connected from the backplane into OTU2 signals.
  • Converges multiple flat-rate 10GE services into one channel of 10GE service.
Client-side service type 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
Cross-connect capabilities OptiX OSN 8800: N/A. OptiX OSN 6800: Supports the cross-connection of two channels of 10GE electrical signals between the LEX4 board and the cross-connect board.
OTN function
  • Provides OTU2 interfaces on the WDM side.
  • Supports TCM and PM functions for ODU2.
  • Supports SM function for OTU2.
WDM specification Supports DWDM specifications.
ESC function Supported
LPT
  • Supports port-based LPT.
  • Supports service-based LPT.
NOTE:
The board supports port-based LPT only when EPL services (port <-> VCTRUNK) are provisioned and supports service-based LPT only when EVPL or QinQ services (port <-> VCTRUNK) are provisioned.
FEC encoding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Monitors OTN alarms and performance events.
  • Supports monitoring of performance events and alarms associated with 10GE WAN, and 10GE LAN services.
Regeneration board The WDM-side signals from one TN11LEX4 board can be regenerated by another TN12ND2/TN52ND2/TN53ND2/TN55NO2/TN53NQ2/TN54NQ2/TN11LSXR board.
ALS function Supports the ALS function on the client side.
NOTE:
ALS function is supported only when EPL services (port <-> VCTRUNK) are provisioned.
IEEE 1588v2 Supported in the WDM side.
Physical clock Supported in the Client side and WDM side.Supports synchronous Ethernet processing instead of synchronous Ethernet transparent transmission on the client side.
NOTE:
The board does not support the physical clock when it is provisioned with 10G WAN services.
PRBS test function Supports the PRBS function on the WDM side
Test frame Supported
Latency measurement Not supported
Optical-layer ASON Supported
Electrical-layer ASON Not supported
Protection scheme
  • Supports client 1+1 protection.
  • Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
  • Supports OWSP protection.
NOTE:
Client 1+1 protection is supported only when EPL services (port <-> VCTRUNK) are configured on the board.
Loopback 10GE optical interface MAC Inloop Supported
Outloop Supported
PHY Inloop Supported
Outloop Supported
WDM side optical interface Inloop Supported
Outloop Supported
Data features of the LEX4 board
Interface characteristics Port working mode 10GE optical port: 10GE LAN full duplex , 10GE WAN full duplex
MFL 1518 bytes to 9600 bytes
Multicast VLAN multicast Supported
IGMP snooping V2 Supported
Layer 2 switching Supports IEEE802.1Q, IEEE802.1ad, and IEEE 802.1D. Supports one VB. Supports MAC address learning and aging. Supports STP/RSTP and MSTP. Supports 32k MAC addresses.
Ethernet service EPL EVPL(VLAN) EVPL(QinQ) EPLAN(IEEE 802.1D) EVPLAN(IEEE 802.1Q) EVPLAN(IEEE 802.1ad)
NOTE:
"EVPL (VLAN)" is displayed as "EPL" on the NMS.
Protection schemes VLAN SNCP Supported
DBPS Supported
ERPS Supported
NOTE:
The ERPS cannot be used in either of the following bridges: IEEE 802.1d bridge IEEE 802.1ad bridge in SVL/Ingress Filter Disable mode.
LAG
  • Supports the IEEE802.3ad-compliant LAG protocol running at IP and trunk ports.
  • Supports manual and static LAGs.
  • Supports load-sharing and non-load-sharing LAGs.
Maintenance features ETH-OAM Supports ETH OAM protocols defined by IEEE802.1ag and IEEE802.3ah.
Port mirroring Supported
RMON Supported
QoS Supports committed access rate (CAR) and class of service (CoS). Supports IEEE802.1p. Supports DSCP.
Flow control Supports IEEE802.3X-compliant Ethernet flow control protocol and flow control termination.
Dimensions (H x W x D) 264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight 0.7 kg (1.5 lb.)

Additional information

Item TN11LEX4
OTN Functions and features of the LEX4 board
Basic function
  • Converts four channels of 10GE WAN or 10GE LAN services received directly on the client side into two channels of standard WDM wavelength OTU2 signals and performs the reverse process.If being used by the OptiX OSN 6800, the board can also converge and convert a maximum of two channels of 10GE services cross-connected from the backplane into OTU2 signals.
  • Converges multiple flat-rate 10GE services into one channel of 10GE service.
Client-side service type 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
Cross-connect capabilities OptiX OSN 8800: N/A. OptiX OSN 6800: Supports the cross-connection of two channels of 10GE electrical signals between the LEX4 board and the cross-connect board.
OTN function
  • Provides OTU2 interfaces on the WDM side.
  • Supports TCM and PM functions for ODU2.
  • Supports SM function for OTU2.
WDM specification Supports DWDM specifications.
ESC function Supported
LPT
  • Supports port-based LPT.
  • Supports service-based LPT.
NOTE:
The board supports port-based LPT only when EPL services (port <-> VCTRUNK) are provisioned and supports service-based LPT only when EVPL or QinQ services (port <-> VCTRUNK) are provisioned.
FEC encoding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Monitors OTN alarms and performance events.
  • Supports monitoring of performance events and alarms associated with 10GE WAN, and 10GE LAN services.
Regeneration board The WDM-side signals from one TN11LEX4 board can be regenerated by another TN12ND2/TN52ND2/TN53ND2/TN55NO2/TN53NQ2/TN54NQ2/TN11LSXR board.
ALS function Supports the ALS function on the client side.
NOTE:
ALS function is supported only when EPL services (port <-> VCTRUNK) are provisioned.
IEEE 1588v2 Supported in the WDM side.
Physical clock Supported in the Client side and WDM side.Supports synchronous Ethernet processing instead of synchronous Ethernet transparent transmission on the client side.
NOTE:
The board does not support the physical clock when it is provisioned with 10G WAN services.
PRBS test function Supports the PRBS function on the WDM side
Test frame Supported
Latency measurement Not supported
Optical-layer ASON Supported
Electrical-layer ASON Not supported
Protection scheme
  • Supports client 1+1 protection.
  • Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
  • Supports OWSP protection.
NOTE:
Client 1+1 protection is supported only when EPL services (port <-> VCTRUNK) are configured on the board.
Loopback 10GE optical interface MAC Inloop Supported
Outloop Supported
PHY Inloop Supported
Outloop Supported
WDM side optical interface Inloop Supported
Outloop Supported
Data features of the LEX4 board
Interface characteristics Port working mode 10GE optical port: 10GE LAN full duplex , 10GE WAN full duplex
MFL 1518 bytes to 9600 bytes
Multicast VLAN multicast Supported
IGMP snooping V2 Supported
Layer 2 switching Supports IEEE802.1Q, IEEE802.1ad, and IEEE 802.1D. Supports one VB. Supports MAC address learning and aging. Supports STP/RSTP and MSTP. Supports 32k MAC addresses.
Ethernet service EPL EVPL(VLAN) EVPL(QinQ) EPLAN(IEEE 802.1D) EVPLAN(IEEE 802.1Q) EVPLAN(IEEE 802.1ad)
NOTE:
"EVPL (VLAN)" is displayed as "EPL" on the NMS.
Protection schemes VLAN SNCP Supported
DBPS Supported
ERPS Supported
NOTE:
The ERPS cannot be used in either of the following bridges: IEEE 802.1d bridge IEEE 802.1ad bridge in SVL/Ingress Filter Disable mode.
LAG
  • Supports the IEEE802.3ad-compliant LAG protocol running at IP and trunk ports.
  • Supports manual and static LAGs.
  • Supports load-sharing and non-load-sharing LAGs.
Maintenance features ETH-OAM Supports ETH OAM protocols defined by IEEE802.1ag and IEEE802.3ah.
Port mirroring Supported
RMON Supported
QoS Supports committed access rate (CAR) and class of service (CoS). Supports IEEE802.1p. Supports DSCP.
Flow control Supports IEEE802.3X-compliant Ethernet flow control protocol and flow control termination.
Dimensions (H x W x D) 264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight 0.7 kg (1.5 lb.)

Reviews

There are no reviews yet.

Be the first to review “TN11LEX4”

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart