TN11OBU1

0 Reviews Write a review
SKU2035738
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 8800 TN11OBU1 optical booster unit

Description

TN11OBU1 Overview

TN11OBU1 optical booster unit applied to OptiX OSN 8800.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Valid slots for the TN11OBU1 board in an OptiX OSN 8800 subrack

Product Valid Slots
OptiX OSN 8800 T64 subrack IU1-IU8, IU11-IU42, IU45-IU68
OptiX OSN 8800 T32 subrack IU1-IU8, IU11-IU27, IU29-IU36
OptiX OSN 6800 subrack IU1-IU17
OptiX OSN 3800 chassis IU2-IU5, IU11
Item TN11OBU1
Basic function
  • Amplifies the input optical signals in C band. The total wavelengths range from 1529 nm to 1561 nm.
  • Supports the system to transmit services over different fiber spans without electrical regeneration.
Typical gain
  • The typical gain of the OBU101 is 20 dB.
  • The typical gain of the OBU103 is 23 dB.
  • The typical gain of the OBU104 is 17 dB.
  • The typical gain of the OBU105 is 23 dB.
  • The typical gain of the OBU1P3 is 18 dB.
Online optical performance monitoring Provides an in-service monitoring port (MON). This port connects to an optical spectrum analyzer or spectrum analyzer unit to monitor the spectrum and optical performance of the multiplexed signal without affecting traffic.
Gain lock function The EDFA inside the board has the gain lock function. Adding or dropping one or more channels or optical signal fluctuation does not affect the signal gain of other channels.
Working mode Supports the gain locking and power locking modes.
  • In the gain locking mode, the gain of the board is tunable and users can query the actual gain of the board. The gain locking mode is enabled by default.
  • The power locking mode applies to scenarios in which there is only dummy light to lock the output power of the board.
Transient control function The EDFA inside the board has the transient control function. When channels are added or dropped, the board can suppress the fluctuation of the optical power in the path so as to implement the smooth upgrading and expansion.
Alarms and performance events monitoring
  • Detects and reports the optical power.
  • Monitors the temperature of the pump laser.
  • Detects the pump driving current, back facet current, pump cooling current, temperature of the pump laser and the ambient temperature of the board.
Optical-layer ASON All OBU1 boards except TN13OBU1P3: SupportedTN13OBU1P3: Not supported
NOTE:
The TN11OBU1 board does not support the setting of Equalization Based OD for Optical Signal-Wavelength Commissioning.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TN11OBU1”

Your email address will not be published. Required fields are marked *

8  ⁄  8  =  

Back to Top

Search For Products

Product has been added to your cart