TN11SRAU

0 Reviews Write a review
SKU2035982
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 8800 TN11SRAU super C-band backward Raman and erbium doped fiber hybrid optical amplifier unit

Description

TN11SRAU overview

TN11SRAU super C-band backward Raman and erbium doped fiber hybrid optical amplifier unit applied to OptiX OSN 8800.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Valid slots for the TN11SRAU board in a OptiX OSN 8800 subrack

Product Valid Slots
OptiX OSN 8800 T64 subrack IU2-IU8, IU12-IU18, IU20-IU26, IU28-IU34, IU36-IU42, IU46-IU52, IU54-IU60, IU62-IU68
OptiX OSN 8800 T32 subrack IU2-IU8, IU12-IU19, IU21-IU27, IU30-IU36
OptiX OSN 8800 T16 subrack IU2-IU8, IU12-IU18
OptiX OSN 8800 universal platform subrack IU2-IU16
OptiX OSN 6800 subrack IU2-IU17
Item TN11SRAU
Basic function
  • Supports forward Raman pump control.
  • Integrates with a forward Raman optical amplifier unit to amplify C-band and extended C-band input optical signals, covering wavelengths within the range of 1528.8 nm to 1567.6 nm.
  • Generates multi-channel pump light of high power, providing energy for the amplification of signals in the fiber.
  • Implements the distributed online amplification of signals over long distance with wide bandwidth and low noise.
  • Supports the interlock switch. The interlock switch of a LINE port on the panel controls the power-on and power-off of the board and prevents eyes from being injured by laser when an optical fiber is inserted into or removed from the LINE port.
Online optical performance monitoring Provides an in-service monitoring port (MON). This port connects to an optical spectrum analyzer or spectrum analyzer unit to monitor the spectrum and optical performance of the multiplexed signal without affecting traffic.
Alarms and performance events monitoring Detects the optical power of the pump laser, temperature control current, pump current, and back facet current. Supports return loss detection. Supports board temperature detection and reporting.
Line fiber quality monitoring function The line fiber quality monitoring function can be used on the NMS. Monitoring figures and data are displayed on the NMS. The Fiber Doctor Management System Software Fee License needs to be purchased for this function.
FCD function The FCD button and indicator are provided. You can press the FCD button on the front panel to trigger FCD. The detection process and results can be identified by the FCD indicator blinking frequency and indicator status. For details, see Front Panel.
Working mode Supports the power locking modes.
Optical-layer ASON Not supported.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TN11SRAU”

Your email address will not be published. Required fields are marked *

6  +  3  =  

Back to Top

Search For Products

Product has been added to your cart