TN11XCS

0 Reviews Write a review
SKU2036460
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei TN11XCS OptiX OSN 8800 centralized cross connect board

Description

TN11XCS Overview

TN11XCS OptiX OSN 8800 centralized cross connect board

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Valid slots for the TN11XCS board in T16 subrack

Product Valid Slots
OptiX OSN 8800 T16 subrack IU9, IU10
Item TN11XCS
Cross-connect function Implements non-congestion full cross-connection of 640 Gbit/s ODUk (k = 0, 1, 2, 2e, 3, flex) signals.
System control function
NOTE:
The TN16XCH board does not support the system control function when the subrack housing the board is a slave subrack.
  • Accomplishes the service grooming, configuration management and alarm output of a subrack.
  • Supports the backup of the NE data. When the NE data changes, the real-time database backup function immediately saves the changed configuration data into the storage medium to ensure that no configuration data is lost after the NE is reset (cold) or powered off. This improves the reliability of the NE.
  • Supports the function of the CF card to back up database. The NE date (except NE IP, NE ID, Gateway ID and Node ID) and the board software are backed up to the CF card, so that the NE needs not to be re-configured after the replacement of the TN16XCH.
  • Supports interconnection and communication between NEs through IP over DCC or HWECC.
  • Implements communication between NEs when used with the TN16AUX by using DCC bytes.
  • Supports subrack cascading. The TN16XCH board processes subrack overheads and alarms and delivers configurations to slave subracks. It connects to the U2000 so that the U2000 can manage the entire NE.
Clock function
  • Basic function:
    • Locks the reference clock source.
    • Provides the system with ITU-T clock signals that comply with G.813- and ITU-T G.823 and frame signals.
    • Synchronizes the time of an NE with the time of the upstream system.
  • Clock source selection function:Traces the external clock source, service clock source, or local clock source, to provide the synchronization clock source for itself and the system.
  • Time synchronization function:Synchronizes the time of an NE with the time of the upstream NE.
Protection scheme Supports 1+1 protection. Provides 1+1 hot backup. Supports warm backup.
Switching mode Supports the manual switching and auto switching. Supports the non-revertive switching.
Electrical-layer ASON Supported
Optical-layer ASON Supported
Physical Clocks Supported
IEEE 1588v2 Supported
G.8275.1 Supported.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TN11XCS”

Your email address will not be published. Required fields are marked *

9  ×    =  63

Back to Top

Search For Products

Product has been added to your cart