TN15OAU1

0 Reviews Write a review
SKU2035704
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 8800 TN15OAU1 optical amplifier unit 

Description

TN15OAU1 Overview

TN15OAU1 optical amplifier unit applied to OptiX OSN 8800.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Valid slots for the TN15OAU1 board in an OptiX OSN 8800 subrack

Product Valid Slots
OptiX OSN 8800 T64 subrack IU1-IU8, IU11-IU42, IU45-IU68
OptiX OSN 8800 T32 subrack IU1-IU8, IU11-IU27, IU29-IU36
OptiX OSN 8800 T16 subrack IU1-IU18
OptiX OSN 8800 universal platform subrack IU1-IU16
Item TN15OAU1
Basic functions
  • Amplifies the power of C-band optical signals. This board supports wavelengths within the 1529-1561 nm range.
  • Provides for service transmissions with varying fiber spans without using electrical regeneration.
Gain adjustment
The OAU1 continuously adjusts the gain continuously based on the input optical power:
  • TN15OAU101P: 20 dB to 31 dB
  • TN15OAU103P: 24 dB to 36 dB
  • TN15OAU106P: 16 dB to 23 dB
In-service optical performance monitoring Provides an in-service monitoring port. This port connects to an optical spectrum analyzer or spectrum analyzer unit to monitor the signal power performance without affecting traffic.
Gain locking The EDFA inside the board has the gain locking function. When this function is enabled, adding or dropping one or more channels or signal power fluctuation inside some channels does not affect the signal gain of other channels.
Working mode Supports the gain locking and power locking modes.
  • In the gain locking mode, the gain of the board is tunable and the user can query the actual gain of the board. The gain locking mode is enabled by default.
  • The power locking mode is used to lock the output power of the board in scenarios in which only dummy lights are present.
  • Automatic Power Control (APC) is one type of power locking modes. Compared with traditional power locking, APC gradually increases optical power and has no light output if no light input is present.
Transient state control The EDFA inside the board has the transient state control function. When channels are added or dropped, the board can suppress the power fluctuation inside the signal channels to support smooth upgrades and expansions.
Alarms and performance events monitoring
  • Detects and reports optical power levels.
  • Monitors the temperature of the pump laser.
  • Detects the drive current, back facet current, pump cooling current, and temperature of the pump laser and the ambient temperature of the board.
Optical-layer ASON Supported

Additional information

Reviews

There are no reviews yet.

Be the first to review “TN15OAU1”

Your email address will not be published. Required fields are marked *

94  −  89  =  

Back to Top

Search For Products

Product has been added to your cart