TNG6WDOLP

0 Reviews Write a review
SKU2016969
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 TNG6WDOLP Dual optical channel protect board

Description

TNG6WDOLP overview

 

TNG6WDOLP Dual optical channel protect board(Non-latching,Single mode,Super C_band & Super L_band) applied  to Huawei OptiX OSN 9800 M05/M12/M24.

The new generation of “M” series subracks have the characteristics of ultra-large capacity, optoelectronic integration, and compact size. They are suitable for comprehensive carrying application scenarios such as broadband video, mobile backhaul, government and enterprise dedicated lines, and DCI interconnection, providing end-to-end optimal transmission solutions from backbone, aggregation to access. The M24 subrack supports two cross-connection modes, 1:1 and 1:3, which differ in the number of cross-connection board configurations, the number of available service board slots, cross-connection capacity, and application scenarios.

The TNG6WDOLP board has only one variant: TNG6WDOLP01.

 

Front panel of the TNG6WDOLP board

TNG6WDOLP

Front panel of the TNG6WDOLP board

 

Valid slots for the TNG6WDOLP board in a  M05/M12/M24 subrack

Device Number of Occupied Slots Physical Slot Logical Slot
OptiX OSN 9800 M05 1 IU1, IU2, IU3, IU4, IU5 IU1, IU2, IU3, IU4, IU5
OptiX OSN 9800 M12 1 IU1 to IU13 IU1 to IU13
OptiX OSN 9800 M24 1 IU1 to IU24 IU1 to IU24
Item TNG6WDOLP
Basic function
  • Provides C+L-band OMS protection to ensure that services can be normally received even when the fiber line is faulty; supports associated switching for C-band and L-band services.
  • Provides C+L-band intra-board 1+1 protection to ensure that services can be normally received even when the fiber line is faulty.
Spectrum application Supports Super C+L band.
Optical-layer ASON
  • C+L Ready supports optical-layer ASON, and C+L band does not support optical-layer ASON.
  • Before the evolution from C+L Ready to C+L band, you must disable ASON.
NOTE:
C+L Ready networking scenario is as follows:
  • Only the Super C band optical layer is deployed, and C+L-band WXFIU, C+L-band WSS, and C+L-band EDFA (only C-OA modules installed) boards are configured.
  • The L-band optical layer is not deployed, and no DL, L-OA, or L-OPM module is configured.
Protection scheme Dual fed and selective receiving. (At the transmit end, the protected signals are dual-fed to the working and protection channels. At the receive end, the working or protection signals are selectively received according to the optical power of the received signals.)
NOTE:
After being powered off and then powered on, the board works in the protection channel by default.
Active/Standby optical power leveling Not Supported
Dimensions (H x W x D)
  • 237.10 × 30.50 × 220.00 (mm)
  • 9.34 × 1.20 × 8.67 (in.)
Weight
  • 1.40 kg
  • 3.09 lb.

Additional information

Item TNG6WDOLP
Basic function
  • Provides C+L-band OMS protection to ensure that services can be normally received even when the fiber line is faulty; supports associated switching for C-band and L-band services.
  • Provides C+L-band intra-board 1+1 protection to ensure that services can be normally received even when the fiber line is faulty.
Spectrum application Supports Super C+L band.
Optical-layer ASON
  • C+L Ready supports optical-layer ASON, and C+L band does not support optical-layer ASON.
  • Before the evolution from C+L Ready to C+L band, you must disable ASON.
NOTE:
C+L Ready networking scenario is as follows:
  • Only the Super C band optical layer is deployed, and C+L-band WXFIU, C+L-band WSS, and C+L-band EDFA (only C-OA modules installed) boards are configured.
  • The L-band optical layer is not deployed, and no DL, L-OA, or L-OPM module is configured.
Protection scheme Dual fed and selective receiving. (At the transmit end, the protected signals are dual-fed to the working and protection channels. At the receive end, the working or protection signals are selectively received according to the optical power of the received signals.)
NOTE:
After being powered off and then powered on, the board works in the protection channel by default.
Active/Standby optical power leveling Not Supported
Dimensions (H x W x D)
  • 237.10 × 30.50 × 220.00 (mm)
  • 9.34 × 1.20 × 8.67 (in.)
Weight
  • 1.40 kg
  • 3.09 lb.

Reviews

There are no reviews yet.

Be the first to review “TNG6WDOLP”

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart