Home/Uncategorized/TNS5NP400
TNS5NP400
Categories:

TNS5NP400

0 Reviews Write a review
SKU2016502
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 TNS5NP400 1 x 200G turbo WDM Universal Line Service Processing Base Board, extend to 400G

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

TNS5NP400 overview

 

TNS5NP400 1 x 200G Turbo WDM Line Service Processing Base Board, extend to 400G, applied to Huawei OptiX OSN 9800 U64/U32/M24.

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

 

Front panel of the TNS5NP400 board

TNS5NP400

Front panel of the TNS5NP400 board

 

Valid slots for the TNS5NP400 board in a U64/U32/M24 subrack

Device Valid Slot
OptiX OSN 9800 U64 Standard subrack IU1–IU64
OptiX OSN 9800 U64 Enhanced subrack IU1–IU64
OptiX OSN 9800 U32 Standard subrack IU1–IU32
OptiX OSN 9800 U32 Enhanced subrack IU1–IU32
OptiX OSN 9800 M24 subrack (IU1, IU13), (IU2, IU14), …, (IU11, IU23), (IU12, IU24)

 

Show More Show Less
Item TNS5NP400
OTN functions and features of the NP400/NP400E board
Basic function Provides one line port and supports a maximum of 160 ODU0, 80 ODU1, 20 ODU2(e), 4 ODU3, 2 ODU4, 160 ODUflex, 2000 OSUflex and 1 OTUC2 signals. The interconversion of. For details about the service mapping path, see Application.
Backplane capacity The total bandwidth is 200 Gbit/s.
OTN overheads protocol Uses the frame formats and overhead processing methods defined in ITU-T G.709.
OTN overhead
  • At the OTUC2 layer: supports SM overhead processing.
  • At the ODUC2 layer: supports PM and TCM overhead processing.
  • At the ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
  • At the OSUflex layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
WDM specifications Supports DWDM specifications.
PRBS The PRBS function is supported on the WDM side.
OSU Supported
NOTE:
The OSU function requires a license.
Line modulation format NRZ
FEC coding SDFEC
ODUk SNCP Supported
OSUflex SNCP Supported
NOTE:
  • When the board works with the TNU2CTU/TNG1CXP board, the board supports a maximum of 1024 OSUflex SNCP protection groups.
  • When the board is configured with the TNU4CTU/TNU5CTU/TNG3CXP/TNG4CXP, the board supports a maximum of 2000 OSUflex SNCP protection groups.
Tributary SNCP Supported
Physical clock Supported
IEEE 1588v2 Supported
NOTE:
When the TNS5NP400/TNS5NP400E is interconnected with the TNU5NP400/TNU5NP400E or TNU1NP400/TNU1NP400E, IEEE 1588v2 is not supported.
ITU-T G.8273.2 Supported
NOTE:
  • When the matching system control board is U2CTU, the board does not support ITU-T G.8273.2.
  • When the TNS5NP400/TNS5NP400E is interconnected with the TNU5NP400/TNU5NP400E or TNU1NP400/TNU1NP400E, ITU-T G.8273.2 is not supported.
ITU-T G.8275.1 Supported
NOTE:
When the TNS5NP400/TNS5NP400E is interconnected with the TNU5NP400/TNU5NP400E or TNU1NP400/TNU1NP400E, ITU-T G.8275.1 is not supported.
Electrical-layer ASON Supported
NOTE:
In the OSU application scenario, electrical-layer ASON is not supported.
Optical-layer ASON Not supported
Channel loopback
  • Supports OSUflex channel loopback.
  • Supports ODUk (k=0, 1, 2, 2e, 3, 4, flex) channel loopback.
NOTE:
The board supports concurrent loopbacks of a maximum of eight OSUflex channels.
Port loopback Supports the WDM-side inloop and outloop.
Latency measurement The board supports latency measurement in the WDM-side optical port direction (upstream direction).
  • When higher-order ODU4 cross-connections are created on the board, the board supports the TCM latency measurement for the higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the board, the PM/TCM latency measurement for higher-order ODU4 channels and TCM latency measurement for lower-order ODUk channels are supported.
  • The board supports PM and TCM latency measurement at the ODUCn layer.
  • The board supports only PM latency measurement for OSUflex channels.
NOTE:
In the OSU application scenario, only two-way latency measurement is supported, but one-way latency measurement is not supported.
Outband DCN Supported
Alarm and performance event monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors OTN alarms and performance events.
  • Monitors the bias current of the laser.
  • Monitors the temperature of the laser.
  • Monitors the optical power of the laser.
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Supports the monitoring of CD and PMD performance.
SDH functions and features of the TNS5NP400/TNS5NP400E board
Basic function Provides one line port to convert SDH signals and ODUk signals from the backplane. For details about the mapping path, see "Application."
Backplane capacity The total bandwidth is 40 Gbit/s.
Service processing capability Supports VC-12/VC-3 and VC-4 services and VC-4-4c, VC-4-16c, and VC-4-64c concatenation services.
Overhead processing
  • Processes section overheads of STM-16/STM-64 signals.
  • Transparently transmits and terminates path overheads.
  • Supports setting and query of J0, J1, and C2 bytes.
  • Supports ECC communication.
  • Supports DCC transparent transmission.
SDH SNCP Supported
Linear MSP Supported
Ring MSP Supported
Physical clock Supports SDH clock synchronization.
Outband DCN Supported
SDH ASON Supported
Channel loopback Supports inloops and outloops on VC-3, VC-12, and VC-4 paths.
Port loopback Supports inloops and outloops on virtual ports.
Alarm and performance event monitoring
  • Monitors B1, B2 bytes to help locate faults.
Dimensions (H x W x D)
  • 477.30 × 30.50 × 220.00 (mm)
  • 18.81 × 1.20 × 8.67 (in.)
Weight
  • 3.23 kg
  • 7.12 lb.

Additional information

Brand
Lead Time
Ship From
Warranty
Condition
Item TNS5NP400
OTN functions and features of the NP400/NP400E board
Basic function Provides one line port and supports a maximum of 160 ODU0, 80 ODU1, 20 ODU2(e), 4 ODU3, 2 ODU4, 160 ODUflex, 2000 OSUflex and 1 OTUC2 signals. The interconversion of. For details about the service mapping path, see Application.
Backplane capacity The total bandwidth is 200 Gbit/s.
OTN overheads protocol Uses the frame formats and overhead processing methods defined in ITU-T G.709.
OTN overhead
  • At the OTUC2 layer: supports SM overhead processing.
  • At the ODUC2 layer: supports PM and TCM overhead processing.
  • At the ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
  • At the OSUflex layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
WDM specifications Supports DWDM specifications.
PRBS The PRBS function is supported on the WDM side.
OSU Supported
NOTE:
The OSU function requires a license.
Line modulation format NRZ
FEC coding SDFEC
ODUk SNCP Supported
OSUflex SNCP Supported
NOTE:
  • When the board works with the TNU2CTU/TNG1CXP board, the board supports a maximum of 1024 OSUflex SNCP protection groups.
  • When the board is configured with the TNU4CTU/TNU5CTU/TNG3CXP/TNG4CXP, the board supports a maximum of 2000 OSUflex SNCP protection groups.
Tributary SNCP Supported
Physical clock Supported
IEEE 1588v2 Supported
NOTE:
When the TNS5NP400/TNS5NP400E is interconnected with the TNU5NP400/TNU5NP400E or TNU1NP400/TNU1NP400E, IEEE 1588v2 is not supported.
ITU-T G.8273.2 Supported
NOTE:
  • When the matching system control board is U2CTU, the board does not support ITU-T G.8273.2.
  • When the TNS5NP400/TNS5NP400E is interconnected with the TNU5NP400/TNU5NP400E or TNU1NP400/TNU1NP400E, ITU-T G.8273.2 is not supported.
ITU-T G.8275.1 Supported
NOTE:
When the TNS5NP400/TNS5NP400E is interconnected with the TNU5NP400/TNU5NP400E or TNU1NP400/TNU1NP400E, ITU-T G.8275.1 is not supported.
Electrical-layer ASON Supported
NOTE:
In the OSU application scenario, electrical-layer ASON is not supported.
Optical-layer ASON Not supported
Channel loopback
  • Supports OSUflex channel loopback.
  • Supports ODUk (k=0, 1, 2, 2e, 3, 4, flex) channel loopback.
NOTE:
The board supports concurrent loopbacks of a maximum of eight OSUflex channels.
Port loopback Supports the WDM-side inloop and outloop.
Latency measurement The board supports latency measurement in the WDM-side optical port direction (upstream direction).
  • When higher-order ODU4 cross-connections are created on the board, the board supports the TCM latency measurement for the higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the board, the PM/TCM latency measurement for higher-order ODU4 channels and TCM latency measurement for lower-order ODUk channels are supported.
  • The board supports PM and TCM latency measurement at the ODUCn layer.
  • The board supports only PM latency measurement for OSUflex channels.
NOTE:
In the OSU application scenario, only two-way latency measurement is supported, but one-way latency measurement is not supported.
Outband DCN Supported
Alarm and performance event monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors OTN alarms and performance events.
  • Monitors the bias current of the laser.
  • Monitors the temperature of the laser.
  • Monitors the optical power of the laser.
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Supports the monitoring of CD and PMD performance.
SDH functions and features of the TNS5NP400/TNS5NP400E board
Basic function Provides one line port to convert SDH signals and ODUk signals from the backplane. For details about the mapping path, see "Application."
Backplane capacity The total bandwidth is 40 Gbit/s.
Service processing capability Supports VC-12/VC-3 and VC-4 services and VC-4-4c, VC-4-16c, and VC-4-64c concatenation services.
Overhead processing
  • Processes section overheads of STM-16/STM-64 signals.
  • Transparently transmits and terminates path overheads.
  • Supports setting and query of J0, J1, and C2 bytes.
  • Supports ECC communication.
  • Supports DCC transparent transmission.
SDH SNCP Supported
Linear MSP Supported
Ring MSP Supported
Physical clock Supports SDH clock synchronization.
Outband DCN Supported
SDH ASON Supported
Channel loopback Supports inloops and outloops on VC-3, VC-12, and VC-4 paths.
Port loopback Supports inloops and outloops on virtual ports.
Alarm and performance event monitoring
  • Monitors B1, B2 bytes to help locate faults.
Dimensions (H x W x D)
  • 477.30 × 30.50 × 220.00 (mm)
  • 18.81 × 1.20 × 8.67 (in.)
Weight
  • 3.23 kg
  • 7.12 lb.

Reviews

There are no reviews yet.

Be the first to review “TNS5NP400”

Your email address will not be published. Required fields are marked *

Related products

J9549A-1
Quick view
Categories:

J9549A

R.F.Q
SKU2011967
J9546A-1
Quick view
Categories:

J9546A

R.F.Q
SKU2011964
J9535A-1
Quick view
Categories:

J9535A

R.F.Q
SKU2011970
Quick view
Categories:

ETP48400-C6A2

R.F.Q
SKU2017502
J9536A-1
Quick view
Categories:

J9536A

R.F.Q
SKU2011969
WS-C3850-48P-S
Quick view
Categories:

WS-C3850-48P-S

R.F.Q
SKU2011323
Main Menu
Back to Top

Search For Products

Popular
Product has been added to your cart