Home/Uncategorized/TNV3T402
TNV3T402c21 1
Categories:

TNV3T402

0 Reviews Write a review
SKU2016062
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 TNV3T402 2 x 100 Gbit/s Tributary Service Processing Board

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

TNV3T402 overview

 

TNV3T402 2 x 100 Gbit/s Tributary Service Processing Board applied to Huawei OptiX OSN 9800 U64/U32/M24.

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

The TNV3T402 board has only one variant: TNV3T402C21.

 

 

Front panel of the TNV3T402 board

TNV3T402

Front panel of the TNV3T402 board

 

Valid slots for the TNV3T402 board in a U64/U32/M24 subrack

Device Number of Occupied Slots Physical Slot Logical Slot
OptiX OSN 9800 M24 2 (IU1, IU13), (IU2, IU14), ……, (IU11, IU23), (IU12, IU24) IU1 to IU12
OptiX OSN 9800 U32 Enhanced 1 IU1 to IU32 IU1 to IU32
OptiX OSN 9800 U32 Standard 1 IU1 to IU32 IU1 to IU32
OptiX OSN 9800 U64 Enhanced 1 IU1 to IU64 IU1 to IU64
OptiX OSN 9800 U64 Standard 1 IU1 to IU64 IU1 to IU64

 

Show More Show Less
Item TNV3T402
Backplane capacity The total bandwidth is 200 Gbit/s.
NOTE:
Supports backplane cross-connections of two ODU4/ODUflex signals from/to the cross-connect board.TNV3T402 board supports ODUflex when receiving 100GE (MAC Transparent Mapping) services on the client side.
Client-side service type
  • 100GE: Ethernet service at a rate of 103.125 Gbit/s
  • OTU4: OTN service at a rate of 111.81 Gbit/s
Service mapping mode 100GE service: Supports Bit Transparent Mapping ODU4, MAC Transparent Mapping ODU4, and MAC Transparent Mapping ODUFlex.
FEC coding
  • Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU4.
  • When the TNV3T402 board uses a converter to receive 100GE services, only RSFEC coding is supported.
OTN overhead
  • ODUflex layer: supports PM overhead processing.
  • ODU4 layer: When the client-side service type is 100GE, supports PM overhead processing.
  • ODU4 layer: When the client-side service type is OTU4, supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
  • OTU4 layer: supports SM overhead processing.
NOTE:
Supports overhead processing defined by ITU-T G.709. The service mapping process complies with ITU-T G.709 and G.Sup43.
Maximum frame length for a port 1518 to 9600 Bytes, supports a jumbo frame with a maximum length of 9600 bytes.
LPT Not supported
Client 1+1 protection Supported
NOTE:
When the client-side uses CFP2-100G(10x10G)-850nm(SR10)-MPO-MMF-0.1km, QSFP28-100G(4x25G)-850nm(SR4)-MPO-MMF-0.1km or QSFP28-100G(4x25G)-1271 to 1331nm(CLR4)-SMF-2km optical module, the TNV3T402 board does not support client-side 1+1 protection.
ODUk SNCP Supported
NOTE:
The board supports ODUk SNCP when k = 4, flex.
Tributary SNCP Supported
NOTE:
Supports the tributary SNCP protection, only when the client side service type is OTU4.
Electrical-layer ASON Supported
L1 service encryption Supported
NOTE:
When receiving OTU4 services on the client side, the board does not support the encryption.
ALS When the client-side service type is 100GE, the board supports the ALS function.
LLDP Not supported
Physical clock
  • Bit Transparent Mapping ODU4: Supports synchronous Ethernet transparent transmission
  • Mac Transparent Mapping ODU4: Supports synchronous Ethernet processing
IEEE 1588v2 Supports this function when receiving100GE(MAC transparent mapping) services on the client side.
ITU-T G.8275.1 Supports this function when receiving100GE(MAC transparent mapping) services on the client side.
ITU-T G.8273.2 Supported
NOTE:
The board does not support ITU-T G.8273.2 when the system control board is U2CTU.
Outband DCN Supported communication over ESCs when the client-side service type is OTU4.
Test frame When the client-side service type is 100GE, the board supports test frame.
PRBS Supported
NOTE:
When a TNV3T402 board receives OTU4 services, the PRBS test function is supported in both the optical port direction and the backplane direction. When the board receives 100GE services, the PRBS test function is supported only in the backplane direction.
Latency measurement
  • When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction).
  • When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction).
Channel loopback Not supported
Port loopback
  • Supports inloops and outloops on the client side.
  • Supports ODUk inloops and ODUk outloops on the client side.
NOTE:
  • The board supports ODUk inloop and ODUk outloop only when non-OTN services are received, the port working mode is non-convergence, and bidirectional cross-connections are configured.
  • When the service type is set to None, Inloop, Outloop, and ODUk Outloop are not supported.
  • When non-OTN services are received, the PRBS in the backplane direction can be used only with ODUk loopback.
Alarm and performance event monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Provides remote monitoring (RMON) of the Ethernet service.
Dimensions (H x W x D)
  • 477.30 × 30.50 × 220.00 (mm)
  • 18.81 × 1.20 × 8.67 (in.)
Weight
  • 2.50 kg
  • 5.51 lb.

Additional information

Brand
Lead Time
Ship From
Warranty
Condition
Item TNV3T402
Backplane capacity The total bandwidth is 200 Gbit/s.
NOTE:
Supports backplane cross-connections of two ODU4/ODUflex signals from/to the cross-connect board.TNV3T402 board supports ODUflex when receiving 100GE (MAC Transparent Mapping) services on the client side.
Client-side service type
  • 100GE: Ethernet service at a rate of 103.125 Gbit/s
  • OTU4: OTN service at a rate of 111.81 Gbit/s
Service mapping mode 100GE service: Supports Bit Transparent Mapping ODU4, MAC Transparent Mapping ODU4, and MAC Transparent Mapping ODUFlex.
FEC coding
  • Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU4.
  • When the TNV3T402 board uses a converter to receive 100GE services, only RSFEC coding is supported.
OTN overhead
  • ODUflex layer: supports PM overhead processing.
  • ODU4 layer: When the client-side service type is 100GE, supports PM overhead processing.
  • ODU4 layer: When the client-side service type is OTU4, supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
  • OTU4 layer: supports SM overhead processing.
NOTE:
Supports overhead processing defined by ITU-T G.709. The service mapping process complies with ITU-T G.709 and G.Sup43.
Maximum frame length for a port 1518 to 9600 Bytes, supports a jumbo frame with a maximum length of 9600 bytes.
LPT Not supported
Client 1+1 protection Supported
NOTE:
When the client-side uses CFP2-100G(10x10G)-850nm(SR10)-MPO-MMF-0.1km, QSFP28-100G(4x25G)-850nm(SR4)-MPO-MMF-0.1km or QSFP28-100G(4x25G)-1271 to 1331nm(CLR4)-SMF-2km optical module, the TNV3T402 board does not support client-side 1+1 protection.
ODUk SNCP Supported
NOTE:
The board supports ODUk SNCP when k = 4, flex.
Tributary SNCP Supported
NOTE:
Supports the tributary SNCP protection, only when the client side service type is OTU4.
Electrical-layer ASON Supported
L1 service encryption Supported
NOTE:
When receiving OTU4 services on the client side, the board does not support the encryption.
ALS When the client-side service type is 100GE, the board supports the ALS function.
LLDP Not supported
Physical clock
  • Bit Transparent Mapping ODU4: Supports synchronous Ethernet transparent transmission
  • Mac Transparent Mapping ODU4: Supports synchronous Ethernet processing
IEEE 1588v2 Supports this function when receiving100GE(MAC transparent mapping) services on the client side.
ITU-T G.8275.1 Supports this function when receiving100GE(MAC transparent mapping) services on the client side.
ITU-T G.8273.2 Supported
NOTE:
The board does not support ITU-T G.8273.2 when the system control board is U2CTU.
Outband DCN Supported communication over ESCs when the client-side service type is OTU4.
Test frame When the client-side service type is 100GE, the board supports test frame.
PRBS Supported
NOTE:
When a TNV3T402 board receives OTU4 services, the PRBS test function is supported in both the optical port direction and the backplane direction. When the board receives 100GE services, the PRBS test function is supported only in the backplane direction.
Latency measurement
  • When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction).
  • When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction).
Channel loopback Not supported
Port loopback
  • Supports inloops and outloops on the client side.
  • Supports ODUk inloops and ODUk outloops on the client side.
NOTE:
  • The board supports ODUk inloop and ODUk outloop only when non-OTN services are received, the port working mode is non-convergence, and bidirectional cross-connections are configured.
  • When the service type is set to None, Inloop, Outloop, and ODUk Outloop are not supported.
  • When non-OTN services are received, the PRBS in the backplane direction can be used only with ODUk loopback.
Alarm and performance event monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Provides remote monitoring (RMON) of the Ethernet service.
Dimensions (H x W x D)
  • 477.30 × 30.50 × 220.00 (mm)
  • 18.81 × 1.20 × 8.67 (in.)
Weight
  • 2.50 kg
  • 5.51 lb.

Reviews

There are no reviews yet.

Be the first to review “TNV3T402”

Your email address will not be published. Required fields are marked *

Related products

J9550A-1
Quick view
Categories:

J9550A

R.F.Q
SKU2011972
J9637A-1
Quick view
Categories:

J9637A

R.F.Q
SKU2011966
JL321A-1
Quick view
Categories:

JL321A

R.F.Q
PNJL321A
J9536A-1
Quick view
Categories:

J9536A

R.F.Q
SKU2011969
WS-C3850-24U-S
Quick view
Categories:

WS-C3850-24U-S

R.F.Q
SKU2011326
WS-C3850-48P-S
Quick view
Categories:

WS-C3850-48P-S

R.F.Q
SKU2011323
Awaiting product image
Categories:

TNV3T402

0 Reviews Write a review
Brands
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 OTN Tributary Boards TNV3T402

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

TNV3T402 overview

This topic describes the substitution relationship between OTN tributary boards.

Unless otherwise specified, a substitute board can be created as the logical board of the original board on the NMS and substitutes for the original board. The board substitution does not require any software upgrade. After the board substitution, the substitute board has only the functions of the original board.

Board substitution

Original Board Substitute Board Using the Version Replacement Function Substitution Rule
TNV3T402 TNV1T502
  • During board substitution using the version replacement function, the NE where the original board resides does not need to be upgraded.
  • The substitute board can be created as the logical board of the original board on the NMS and replace the original board. The substitute board has only the functions of the original board.
  • For detailed description of the optical module substitution relationship, see the following table “optical module substitution”.
  • The original board can be replaced only when the board software of the substitute board is V100R019C10SPC600 or later. During the replacement, the NE where the original board resides does not need to be upgraded.
  • When a TNV1T502 board substitutes for a TNV3T402 board using the version replacement function, the TNV1XCS/TNV2XCS/TNS1XCS cross-connect board is not supported.

Optical module substitution

Original Optical Module Substitute Optical Module Substitution Rule
QSFP28,850nm,100G,-8.4dBm,2.4dBm,-10.3dBm,MPO,MM,0.1km,OM4 QSFP28,850nm,100G,-8.4dBm,2.4dBm,-10.3dBm,MPO,MM,0.1km,OM4 The board software of the substitute board must be V100R019C10SPC600 or later to support optical module substitution.
CFP2,10*10Gb/s(850nm Band),103.125Gb/s,-7.6dBm,1dBm,-9.5dBm,MPO,MM,0.1km N/A N/A
CFP2,4*25&4*28Gb/s(1310nm Band),103.125&111.81Gb/s,-1.3dBm,4.5dBm,-8.6dBm,LC straight,SMF,10km QSFP28,1295nm to 1310nm,103.125&111.81Gb/s,-4.3dBm,4.5dBm,-10.6dBm,LC,SMF,10km,LR4 The board software of the substitute board must be V100R019C10SPC600 or later to support optical module substitution.
QSFP28,1310nm,100G,-6.5dBm,2.5dBm,-10.9dBm,LC,SMF,2km QSFP28,1310nm,100G,-6.5dBm,2.5dBm,-10.9dBm,LC,SMF,2km The board software of the substitute board must be V100R019C10SPC600 or later to support optical module substitution.
Show More Show Less
Substitution Relationship between 10G OTN Tributary Boards
Original Board Substitute Board Using the Version Replacement Function Substitution Rule
TNV1T130 TNV3T230 For details about board substitution, see the general description.
TNV1T210 TNV3T230 When a TNV3T230 board substitutes for a TNV1T210 board by using the version replacement function, only ports TX1/RX1 to TX10/RX10 can be used.
TNV2T210 TNV3T210 For details about board substitution, see the general description.
TNV2T210 TNV3T230 When a TNV3T230 board substitutes for a TNV2T210 board by using the version replacement function, only ports TX1/RX1 to TX10/RX10 can be used.
TNV2T220 TNV3T230 When a TNV3T230 board substitutes for a TNV2T220 board by using the version replacement function, only ports TX1/RX1 to TX20/RX20 can be used.
TNV2T220 TNV7T220
  • When a TNV7T220 board substitutes for a TNV2T220 board using the version replacement function, only the TNU2UXCS/TNS1UXCS cross-connect board is supported.
  • The power consumption of the TNV7T220 board is higher than that of the TNV2T220 board. To use a TNV7T220 board to substitute for a TNV2T220 board, ensure that the subrack power supply has a sufficient margin. If the nominal power consumption of the TNV7T220 board exceeds the available power supply capability of the subrack, the TNV7T220 board will not be powered on, and the logical board and related services cannot be created. As a result, the board substitution fails.
TNV3T220 TNV7T220
  • When a TNV7T220 board substitutes for a TNV3T220 board using the version replacement function, only the TX11/RX11 to TX14/RX14 ports can be used to receive FC1600 services.
  • The power consumption of the TNV7T220 board is higher than that of the TNV3T220 board. To use a TNV7T220 board to substitute for a TNV3T220 board, ensure that the subrack power supply has a sufficient margin. If the nominal power consumption of the TNV7T220 board exceeds the available power supply capability of the subrack, the TNV7T220 board will not be powered on, and the logical board and related services cannot be created. As a result, the board substitution fails.
  • When a TNV7T220 board substitutes for a TNV3T220 board using the version replacement function, the Service Type is set to Any in ODU1 convergence mode, the TNV7T220 board does not support end-to-end client-side interconnection with the peer TNV3T210/TNV3T220/TNV3T230/TNG1T206/TNG1T212/TNG1A212/TNG2A212/TNG1M210D board.
TNV1T216 TNV3T230 When a TNV3T230 board substitutes for a TNV1T216 board by using the version replacement function, only ports TX1/RX1 to TX16/RX16 can be used.
TNV6T220 TNV7T220
  • The power consumption of the TNV7T220 board is higher than that of the TNV6T220 board. To use a TNV7T220 board to substitute for a TNV6T220 board, ensure that the subrack power supply has a sufficient margin. If the nominal power consumption of the TNV7T220 board exceeds the available power supply capability of the subrack, the TNV7T220 board will not be powered on, and the logical board and related services cannot be created. As a result, the board substitution fails.
  • When a TNV7T220 board substitutes for a TNV6T220 board using the version replacement function, the Service Type is set to Any in ODU1 convergence mode, the TNV7T220 board does not support end-to-end client-side interconnection with the peer TNV3T210/TNV3T220/TNV3T230/TNG1T206/TNG1T212/TNG1A212/TNG2A212/TNG1M210D board.
Substitution Relationship between 100G and beyond-100G OTN Tributary Boards
Original Board Substitute Board Using the Version Replacement Function
TNV1T401 TNV3T401
TNV1T402 TNV3T402
TNV1T402 TNU1G402
TNV5T402 TNV8T402
TNV7T402 TNV8T402
TNV2T404 TNV3T404
TNV2T404 TNV5T404
TNV2T404 TNV8T404
TNV2T404 TNU1G404
TNV3T404 TNV5T404
TNV3T404 TNV8T404
TNV5T404 TNV8T404
TNV1T402/TNV3T402 TNV1T502
TNV1T601 TNV2T601

Additional information

Brand

Huawei
Lead Time

3-5 days
Ship From

Shenzhen Warehouse
Substitution Relationship between 10G OTN Tributary Boards
Original Board Substitute Board Using the Version Replacement Function Substitution Rule
TNV1T130 TNV3T230 For details about board substitution, see the general description.
TNV1T210 TNV3T230 When a TNV3T230 board substitutes for a TNV1T210 board by using the version replacement function, only ports TX1/RX1 to TX10/RX10 can be used.
TNV2T210 TNV3T210 For details about board substitution, see the general description.
TNV2T210 TNV3T230 When a TNV3T230 board substitutes for a TNV2T210 board by using the version replacement function, only ports TX1/RX1 to TX10/RX10 can be used.
TNV2T220 TNV3T230 When a TNV3T230 board substitutes for a TNV2T220 board by using the version replacement function, only ports TX1/RX1 to TX20/RX20 can be used.
TNV2T220 TNV7T220
  • When a TNV7T220 board substitutes for a TNV2T220 board using the version replacement function, only the TNU2UXCS/TNS1UXCS cross-connect board is supported.
  • The power consumption of the TNV7T220 board is higher than that of the TNV2T220 board. To use a TNV7T220 board to substitute for a TNV2T220 board, ensure that the subrack power supply has a sufficient margin. If the nominal power consumption of the TNV7T220 board exceeds the available power supply capability of the subrack, the TNV7T220 board will not be powered on, and the logical board and related services cannot be created. As a result, the board substitution fails.
TNV3T220 TNV7T220
  • When a TNV7T220 board substitutes for a TNV3T220 board using the version replacement function, only the TX11/RX11 to TX14/RX14 ports can be used to receive FC1600 services.
  • The power consumption of the TNV7T220 board is higher than that of the TNV3T220 board. To use a TNV7T220 board to substitute for a TNV3T220 board, ensure that the subrack power supply has a sufficient margin. If the nominal power consumption of the TNV7T220 board exceeds the available power supply capability of the subrack, the TNV7T220 board will not be powered on, and the logical board and related services cannot be created. As a result, the board substitution fails.
  • When a TNV7T220 board substitutes for a TNV3T220 board using the version replacement function, the Service Type is set to Any in ODU1 convergence mode, the TNV7T220 board does not support end-to-end client-side interconnection with the peer TNV3T210/TNV3T220/TNV3T230/TNG1T206/TNG1T212/TNG1A212/TNG2A212/TNG1M210D board.
TNV1T216 TNV3T230 When a TNV3T230 board substitutes for a TNV1T216 board by using the version replacement function, only ports TX1/RX1 to TX16/RX16 can be used.
TNV6T220 TNV7T220
  • The power consumption of the TNV7T220 board is higher than that of the TNV6T220 board. To use a TNV7T220 board to substitute for a TNV6T220 board, ensure that the subrack power supply has a sufficient margin. If the nominal power consumption of the TNV7T220 board exceeds the available power supply capability of the subrack, the TNV7T220 board will not be powered on, and the logical board and related services cannot be created. As a result, the board substitution fails.
  • When a TNV7T220 board substitutes for a TNV6T220 board using the version replacement function, the Service Type is set to Any in ODU1 convergence mode, the TNV7T220 board does not support end-to-end client-side interconnection with the peer TNV3T210/TNV3T220/TNV3T230/TNG1T206/TNG1T212/TNG1A212/TNG2A212/TNG1M210D board.
Substitution Relationship between 100G and beyond-100G OTN Tributary Boards
Original Board Substitute Board Using the Version Replacement Function
TNV1T401 TNV3T401
TNV1T402 TNV3T402
TNV1T402 TNU1G402
TNV5T402 TNV8T402
TNV7T402 TNV8T402
TNV2T404 TNV3T404
TNV2T404 TNV5T404
TNV2T404 TNV8T404
TNV2T404 TNU1G404
TNV3T404 TNV5T404
TNV3T404 TNV8T404
TNV5T404 TNV8T404
TNV1T402/TNV3T402 TNV1T502
TNV1T601 TNV2T601

Reviews

There are no reviews yet.

Be the first to review “TNV3T402”

Your email address will not be published. Required fields are marked *

Related products

TNV1T216-1TNV1T216-2
Quick view
Categories:

TNV1T216

R.F.Q
(2)
SKU2012851
TNV5U210-1
Quick view
Categories:

TNV5U210

R.F.Q
SKU2012882
TNU5N404C01-1
Quick view
Categories:

TNU5N404C01

R.F.Q
(1)
SKU2009716
TNS2N501-1
Quick view
Categories:

TNS2N501

R.F.Q
(1)
SKU2012868
TNV2T601-1TNV2T601-4
Quick view
Categories:

TNV2T601

R.F.Q
(1)
SKU2012919
Quick view
Categories:

OSN 9800 U64 Enhanced

R.F.Q
SKU2012921
Main Menu
Back to Top

Search For Products

Popular
Product has been added to your cart