Huawei, ZTE, Nokia, Alcatel Lucent, Fiberhome Network Hardware Store

Description

ZXR10 6800-8E overview

A ZXR10 6800-8E chassis has a height of 6 U (1 U = 44.45 mm), and dimensions of 264 mm (height) × 442 mm (width) × 200 mm (depth). For its components.

 

Heat Dissipation Mode

The ZXR10 6800-8E uses forced air for heat dissipation. It can automatically adjust the fan speed depending on the device operation status. The fan status monitoring and failure alarm function are supported. Cool air is taken in from one side of the chassis, goes through the boards and power supply modules inside the chassis, and is blown out from the other side of the chassis

Power Supplies

The ZXR10 ASR series routers support an AC power supply (100 V to 240 V) and a DC power supply (-72 V to -38 V). The ZXR10 6800-8E supports dual power supplies in 1+1 redundancy mode and mixed installation of AC and DC power supplies. A power supply module provides the following functions:

• Input/output overvoltage/undervoltage alarm and protection
• Output overcurrent alarm and protection
• Temperature alarm and overtemperature protection

Table1 Components of the ZXR10 6800-8E

Component	Description
Board section	Two MPU slots, two PFU slots, and eight PIU slots are provided.
Power module	Two power supply modules are provided.
Fan module	A vertical fan module is provided.

Parameter		Specification
Physical parameters	Dimensions (height × width × depth)	264 mm ×442 mm ×200 mm
	Weight (full configuration)	≤ 22.5 kg
Slot	Total number of slots	12
	Number of PFU slots	2
	Number of PIU slots	8
DC power (single)	Redundancy mode	1+1
	Maximum output power	500 W
	Input voltage range	-72 V DC to -38 V DC
AC power (single)	Redundancy mode	1+1
	Input voltage range	100 V AC-240 V AC
	Input frequency range	50 Hz–60 Hz
	Rated output power per module	500 W
Heat Dissipation System	Number of fan modules	1
Grounding resistance		Resistance of joint grounding : < 5 Ω