Home/Transport Network/OSN 9800 Series/OSN 9800 M Series/TNG1M804SMT71
TNG1M804SMT71
TNG1M804SMT71
TNG1M804SMT71
TNG1M804SMT71
Categories:,

TNG1M804SMT71

0 Reviews Write a review
SKU2036089
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 TNG1M804SMT71 2 x 400Gbit/s or 8 x 100Gbit/s Service Multiplexing Into 1 x 400G-800G Programmable Wavelength Conversion Board

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

TNG1M804SMT71 Overview

TNG1M804SMT71 2 x 400Gbit/s or 8 x 100Gbit/s Service Multiplexing Into 1 x 400G-800G Programmable Wavelength Conversion Board, applied to Huawei OptiX OSN 9800 M05/M12/M24.

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

The TNG1M804SMT71 board has two variants: TNG1M804SMT71, TNG1M804SMT75.

 

Valid slots for the TNG1M804SMT71 board in a M05/M12/M24 subrack

Device Number of Occupied Slots Physical Slot Logical Slot
OptiX OSN 9800 M05 1 IU1, IU2, IU3, IU4, IU5 IU1, IU2, IU3, IU4, IU5
OptiX OSN 9800 M12 1 IU1 to IU13 IU1 to IU13
OptiX OSN 9800 M24 1 IU1 to IU24 IU1 to IU24
Item TNG1M804SMT71
Functions and Features of the TNG1M804SMT71 Board (OTU)
Basic function The board can convert client-side services into OTU signals,the client-side service supports hybrid transmission of different services, for details about the service types, number of channels, and mapping paths supported by different ports, see Applications.
Client-side service type
  • OTU4: OTN service at a rate of 111.81 Gbit/s
  • 100GE: Ethernet service at a rate of 103.125 Gbit/s
  • 400GE: Ethernet service at a rate of 425 Gbit/s
  • 100G FlexE unaware: Flexible ethernet services at a rate of 103.125 Gbit/s
NOTE:
A FlexE Group can be bound to only one Ethernet PHY.
Service mapping mode
  • 100GE service: Supports Bit Transparent Mapping ODU4, MAC Transparent Mapping ODU4, MACB2B mapping.
  • 400GE service: Supports Bit Transparent Mapping(BMP), MACB2B mapping.
  • FlexE 100G unaware service: Supports Bit Transparent Mapping ODU4, Bit Transparent Mapping(BMP) mapping.
WDM specification Supports the DWDM specifications.
Tunable wavelength TNG1M804SM supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
FEC coding
  • Client side: Supports FEC coding when the client-side service type is OTU4.
  • Client side: Supports RSFEC coding when the client-side service type are ethernet services, FlexE services.
  • WDM side: Supports SDFEC3 coding.
Line modulation format
  • 400G s16QAM
  • 600G 16QAM
  • 800G e64QAM
Typical channel spacing 400G s16QAM/600G 16QAM/800G e64QAM: 100GHz+n*6.25GHz(n=0,1,2...)
NOTE:
Due to high filtering penalty, the preceding modulation formats cannot be used with 100G optical-layer boards with fixed channel spacing, such as the TNG2D60 and TNG2M60.
OTN overhead
  • ODUflex/ODUCn (n = 4, 6, 8) layer: supports PM and TCM overhead processing.
  • ODU4 layer:
    • Supports PM and TCM overhead processing when 100GE services are received on the client side.
    • Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads.
    • Supports SM overhead processing at the OTU4 layer on the client side.
  • OTUCn (n = 4, 6, 8) layer: supports SM overhead processing.
LPT Not supported
Intra-board 1+1 protection Supported
NOTE:
  • Supports intra-board 1+1 protection when working with optical protection boards.
Client 1+1 protection Supported
NOTE:
  • Client 1+1 protection is supported only when 100GE/OTU4 ports are used.
  • When 100GE services are received on the client side, client 1+1 protection supports bidirectional switching rather than unidirectional switching. When OTU4 services are received on the client side, client 1+1 protection supports unidirectional switching.
ODUk SNCP Not supported
Tributary SNCP Not supported
Optical-layer ASON Supported
NOTE:
Supported when the line rate is OTUCn (n = 4, 6).
L1 service encryption Supports setting the encryption function by port.
NOTE:
  • After the encryption function is configured, the WDM-side rate of the board cannot be switched, but the modulation formats of the same rate can be switched.
  • Supported when ethernet services or FlexE services are accessed.
Digital optical label When LS Ability is enabled, the board supports loading low-frequency pilot-tone modulation signals and overheads during wavelength conversion, and can work the optical-layer board that supports the digital optical label function to detect optical power and overheads and report optical performance data.
ALS Supports the ALS function on the client side when client services are non-OTN services.
LLDP Supports the LLDP function when the client-side service is ethernet.
NOTE:
  • The board does not support LLDP when receiving FlexE services.
  • LLDP only supports RX and DISABLE modes.
Physical clock Supports synchronous Ethernet processing:
  • 100GE (MAC Transparent Mapping ODU4/MACB2B)
  • 400GE (MACB2B)
Supports synchronous Ethernet transparent transmission:
  • 100GE (Bit Transparent Mapping ODU4)
  • 400GE (Bit Transparent Mapping(BMP))
  • FlexE 100G unaware
IEEE 1588v2 Supported
NOTE:
Supported when Ethernet services are received on the client side and the mapping mode is GFP-F or MACB2B. Supported when FlexE services are received on the client side.
ITU-T G.8275.1 Supported
NOTE:
Supported when Ethernet services are received on the client side and the mapping mode is GFP-F or MACB2B. Supported when FlexE services are received on the client side.
ITU-T G.8273.2 Supported
NOTE:
Supported when Ethernet services are received on the client side and the mapping mode is GFP-F or MACB2B. Supported when FlexE services are received on the client side.
Outband DCN Supports ESC communication.
NOTE:
  • The board supports a maximum of four ESCs.
  • When the Dual-CS optical module receives services, only the first channel supports ESC communication.
Test frame Supported when the client-side service type is 100GE or 400GE.
NOTE:
For Ethernet test frames, only one interface can be used to send them at a time.
PRBS
  • Supports the PRBS function on the WDM side.
  • PRBS signals can be sent from the client-side optical port to the WDM side only when the client-side service type is OTU4 and the board works in Muxponder mode.
  • PRBS signals can be sent from the client-side optical port to the system side.
NOTE:
PRBS signals can not be sent from the client-side optical port to the system side, when the WDM-side rate is OTUC8.
Latency measurement
  • Supports PM and TCM latency measurement for upstream higher-order ODU channels.
  • Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side.
  • Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side.
NOTE:
  • In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
  • When the cross-connect granularity is TDUflex, the PM/TCM latency measurement of the lower-order ODU channel is not supported.
Channel loopback Support channel inloop and outloop
NOTE:
Only ports that use dual-CS optical modules to access services support channel loopback.
Port loopback
  • Supports inloops and outloops on the WDM side.
  • Supports inloops and outloops on the client side.
  • Supports ODUk inloops and ODUk outloops on the client side.
  • Supports inloops and outloops in a FlexE group.
NOTE:
  • Client-side ports that use Dual-CS optical modules to receive services do not support client-side loopback.
  • When the WDM-side rate of the board is OTUC8, the ODUk loopback function is not supported.
  • ODUk loopback and FlexE group loopback cannot be configured at the same time.
  • If the client-side service rate of the same service is the same as that of the WDM-side service, the WDM-side optical interface loopback is not supported.
Alarm and performance event monitoring
  • Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line failures.
  • Supports the monitoring of OTN alarms and performance events.
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Supports the monitoring of the bias current of the laser.
  • Supports the monitoring of the temperature of the laser.
  • Supports the monitoring of the optical power.
  • Supports the monitoring of CD and PMD performance.
Functions and Features of the TNG1M804SMT71 Board (Regeneration)
Basic function Electrically regenerates optical signals at an electrical REG station.
Regeneration mode Unidirectional regeneration
Regeneration rate
  • OTUC4
  • OTUC6
  • OTUC8
WDM specification Supports the DWDM specifications.
Tunable wavelength M804SM supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
FEC coding SDFEC3
Line modulation format
  • 400G s16QAM
  • 600G 16QAM
  • 800G e64QAM
Typical channel spacing 400G s16QAM/600G 16QAM/800G e64QAM: 100GHz+n*6.25GHz(n=0,1,2...)
NOTE:
Due to high filtering penalty, the preceding modulation formats cannot be used with 100G optical-layer boards with fixed channel spacing, such as the TNG2D60 and TNG2M60.
OTN overhead OTUCn (n = 4, 6, 8) layer: supports SM overhead processing.
Optical-layer ASON Supported
NOTE:
Supported when the line rate is OTUCn (n = 4, 6).
ALS Supported
Outband DCN Supports ESC communication.
Alarm and performance event monitoring
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports CD and PMD performance monitoring.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TNG1M804SMT71”

Your email address will not be published. Required fields are marked *

  ⁄  3  =  1

Related products

TNS7N404C06-1
Quick view
Categories1: ,

TNS7N404C06

R.F.Q
(1)
SKU2012153
TNV2T601-1TNV2T601-4
Quick view
Categories1: ,

TNV2T601

R.F.Q
(1)
SKU2012919
TNS7N402-1TNS7N402-2
Quick view
Categories1: ,

TNS7N402

R.F.Q
(1)
SKU2012864
TNV1T216-1TNV1T216-2
Quick view
Categories1: ,

TNV1T216

R.F.Q
(2)
SKU2012851
TNU5N404C01-1
Quick view
Categories1: ,

TNU5N404C01

R.F.Q
(1)
SKU2009716
TNV8T404-1TNV8T404-4
Quick view
Categories1: ,

TNV8T404

R.F.Q
SKU2012908
Main Menu
Back to Top

Search For Products

Popular
Product has been added to your cart