$0.00 Original price was: $0.00.Current price is: $0.00.
Huawei H801GICF 2-port GE optical uplink board without SFP module, apply to Huawei MA5680T/MA5683T
The H801GICF board is a 2-port GE optical uplink board, which can be used in the Huawei MA5600T series OLTs: MA5683T MA5680T.
This board comes without any optical transceivers, it is supposed to work with two GE 10km SFP modules.
| Item | H801GICF |
| Port | 2 GE Optical Uplink Ports |
| Pluggable Module | Optical Module(SFP) Electrical Module(SFP) |
| Corresponding Control Board | SCUN/SCUL/SCUH |
| SFP Module specification | |
| SFP module type (typical configuration) | One-channel two-fiber bi-directional optical module |
| Operating Wavelength | 1310 nm |
| Encapsulation Type | SFP |
| Port Rate | 1.25 Gbit/s |
| Minimum Output Optical Power | -9.00 dBm/-9.50 dBm |
| Maximum Output Optical Power | -3.00 dBm |
| Maximum Receiver Sensitivity | -20.00dBm |
| Optical Connector Type | LC |
| Optical Fiber Type | Single-mode |
| Reach | 10.00KM |
| Overload Optical Power | -3.0 dBm |
| Extinction Ratio | 9.0 dB |
| Device Specifications | |
| Dimensions (mm) | 25.40 (W) x 237.00 (D) x 197.20 (H) |
| Power Consumption and Maximum Frame Size | |
| Power Consumption | H801GICF : Static: 3.9 W Maximum: 3.9 W |
| Maximum Frame Size | 2052 bytes. After jumbo frame function is enabled, a maximum of 9216 bytes can be supported. |
| Operating temperature | -25°C to +65°C |
| Relation between GE optical/electrical modules and boards | One-channel Two-fiber Bi-directional GE Optical Module |
| One-channel One-fiber Bi-directional GE Optical Module | |
| One-channel Two-fiber Bi-directional GE CWDM Optical Module | |
| GE Electrical Module | |
Can the MA5600 Series interoperate with third-party ONUs/ONTs?
Yes, as long as both sides comply with ITU-T G.988 OMCI standards.
However, advanced functions such as Wi-Fi, VoIP, TR-069, and custom VLAN templates may behave differently.
A full OMCI interoperability and service verification test is strongly recommended before large-scale deployment.
Which uplink options are supported?
The MA5608T supports GE and 10GE uplink interfaces through dedicated uplink boards, enabling flexible integration into aggregation or core networks. Link protection and redundant uplink configurations are supported.
What is the maximum access capacity supported by the MA5608T chassis?
Depending on installed service boards, the MA5608T can support up to:
1. 4,096 GPON subscribers (with typical 1:64 split ratio)
2. 2 service slots for PON boards
Actual capacity depends on optical budget, splitter design, and upstream network planning.
Which software version should be used? Is upgrading to the latest version necessary?
For carrier networks, the priority is:
1. Version stability
2. Board compatibility
3. Feature consistency with existing equipment
Use a widely deployed, mature version rather than the newest release. Always prepare a rollback plan before upgrading
What management and software features are supported?
The device supports IPv4/IPv6 dual stack, QoS, VLAN and QinQ, IGMP/MLD, OAM, remote maintenance, and full compatibility with Huawei NMS platforms.
| Weight | 2.5000 kg |
|---|---|
| Dimensions | 34.0000 × 25.5000 × 10.0000 cm |
| Brand | Huawei |
| Lead Time | 3-5 days |
| Ship From | Shenzhen Warehouse |
| MA5600T |
.svg)
.svg)
Simón –
Mi último proveedor me dijo que GICG puede conectar módulos ópticos de GE, ¡lo cual es muy molesto!
El representante de ventas de Telecomate son muy profesionales y comprenden muy bien los productos. Estamos muy satisfechos con ellos.
Alden –
The price is lower than local . The delivery is so fast. Would recommended to everyone.
Henry –
This board is a perfect fit for the OLT I use, compared to x2CS, this model and configuration has met my requirements. Will recommend Telecomate.com to friends who need it.