ETP48200-B2A1

Environment conditions

Operating temperature

–40°C to +65°C; when the operating temperature ranges from 55°C to 65°C, rectifier power is derated automatically.

Transportation temperature

–40°C to +70°C

Storage temperature

–40°C to +70°C

Operating humidity

5%–90% RH (non-condensing)

Storage humidity

5%–95% RH (non-condensing)

Altitude

0–4000 m

When the altitude ranges from 2000 m to 4000 m, the operating temperature decreases by 1°C for each additional 200 m.

Other requirements

There is no conductive dust, corrosive gas, or explosion hazard.

Dust, corrosive substances, pests, molds, and other indicators should be controlled in accordance with class 3.1 requirements in ETSI EN 300 019-1-3 (V2.3.2 or a later version).

AC input

Input system

220/380 V AC three-phase four-wire (compatible with 220 V AC single-phase and 110 V AC dual-live wire)

Rated voltage

200/346–240/415V AC

Voltage range

85/148–300/520V AC

Input frequency

45–65 Hz (rated frequency: 50 Hz/60 Hz)

DC input

Input system

HVDC (HV+, HV–) input

Rated voltage

380 V DC

Voltage range

85–420 V DC

DC output

Output voltage range

–42 V DC to –58 V DC

Maximum output power

10000W

Regulated voltage precision

≤ ±1%

Peak-peak noise voltage

≤ 200 mV

Unbalance of load sharing

≤ ±5% (50%–100% load)

AC input protection

AC input overvoltage protection threshold

> 300 V AC

AC input overvoltage recovery threshold

When the voltage is restored to 290 V AC, the output restores.

AC input undervoltage protection threshold

< 80 V AC

AC input undervoltage recovery threshold

When the voltage is restored to 85 V AC, the output restores.

DC input protection

DC input overvoltage protection threshold

> 420 V DC

DC input overvoltage recovery threshold

When the voltage is restored to 414 V DC, the output restores.

DC output protection

DC output overvoltage protection threshold

Range: 56–60 V DC

EMC specifications

Conducted emission

Input ports: CISPR 22/EN 55032 Class B (AC input); Class A¹ (DC input)

Output ports: CISPR 22/EN 55032 Class A

Radiated interference

CISPR 22/EN 55032 Class B

Harmonic

IEC61000-3-2/12

Fluctuation and flicker

IEC61000-3-3/11

Electrostatic discharge (ESD)

Enclosure port: contact discharge 6 kV, air discharge 8 kV (criterion B); contact discharge 8 kV, air discharge 15 kV (criterion R); signal port: contact discharge 2 kV (criterion R)

Electrical fast transient (EFT)

Signal port: 1 kV; power port: 2 kV (criterion B)

Radiated susceptibility (RS)

10 V/m field strength (criterion A)

Conducted susceptibility (CS)

Power port: 10 V; signal port: 3 V (criterion A)

Surge susceptibility (Surge)

AC power port: horizontal 6 kV (line to line), vertical 6 kV (single-wire to ground), 1.2/50 μs (criterion B)

DC power port: 2 kV in differential mode, 4 kV in common mode, 1.2/50 µs (criterion B)

Signal cables inside the cabinet: 1 kV in common mode, 1.2/50 µs (criterion B)

Signal cables outside the cabinet: 2 kV in common mode, 1.2/50 µs (criterion B)

Voltage dip (DIP)

Complies with IEC 61000-4-11.

Others

Safety design

Complies with IEC 60950-1/IEC 62368-1/GB 4943 and CE certification.

MTBF

250,000 hours

Structure

Dimensions (H x W x D)

86.1 mm x 442 mm x 255 mm (without mounting ears)

Weight

≤16 kg (including five rectifiers and one monitoring module)

IP rating

IP20

Installation mode

Horizontally and vertically installed in a 19-inch rack

Maintenance mode

Maintained from the front

Heat dissipation mode

Free cooling