H801GICG

2 Reviews Write a review
PN03028434
AvailabilityIn Stock
huawei-ma5600t Uplink Board
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Original price was: $0.00.Current price is: $0.00.

Huawei H801GICG 2-port GE electrical uplink board without SFP Module, apply to Huawei MA5680T/MA5683T

Description

The H801GICG board is a 2-port GE electrical interface card, providing upstream or cascading electrical ports, which can be used in the Huawei MA5600T series OLTs: MA5683T MA5680T.

This board comes without any optical transceivers, it is supposed to work with two 1000BAST-T modules.

 

 

Working principle of the H801GICG board

h801gicg principle

Item H801GICG
Dimensions (mm) 25.40 (W) x 237.00 (D) x 197.20 (H)
Power Consumption and Maximum Frame Size
Power Consumption Static: 6.3 W Maximum: 9.2 W
Maximum Frame Size 2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported
Operating temperature -25°C to +65°C
 

What is the maximum access capacity supported by the MA5608T chassis?

Depending on installed service boards, the MA5608T can support up to:
1. 4,096 GPON subscribers (with typical 1:64 split ratio)
2. 2 service slots for PON boards
Actual capacity depends on optical budget, splitter design, and upstream network planning.

Which software version should be used? Is upgrading to the latest version necessary?

For carrier networks, the priority is:
1. Version stability
2. Board compatibility
3. Feature consistency with existing equipment
Use a widely deployed, mature version rather than the newest release. Always prepare a rollback plan before upgrading

What control and switching capabilities does the MA5608T provide?

The MA5608T supports dual-control-board architecture and provides high switching throughput with carrier-grade forwarding performance. It supports L2/L3 edge access features, including VLAN, QinQ, QoS, multicast, and user authentication.

Does the MA5600 Series support IPv6? Will software upgrades be required?

Yes. IPv6 is supported when:
The control board runs a software version that includes IPv6 features.
ONUs/ONTs support IPv6 (bridge or routing mode).
The broadband service is configured for IPv6 address assignment (SLAAC/PD/DHCPv6).
A unified IPv6 plan is recommended to avoid routing inconsistencies.

What management and software features are supported?

The device supports IPv4/IPv6 dual stack, QoS, VLAN and QinQ, IGMP/MLD, OAM, remote maintenance, and full compatibility with Huawei NMS platforms.

Additional information

Weight 2.5000 kg
Dimensions 34.0000 × 25.5000 × 10.0000 cm
MA5600T

Reviews

  1. Javier Gonzales

    Soy cliente habitual de Telecomate y siempre he quedado muy satisfecho con sus productos, las tarjetas GICF entregadas en esta ocasión son todas nuevas y originales.

  2. otto

    You can take note of this board without any optical transceiver, you should use two 1000BAST-T modules.

Add a review

Your email address will not be published. Required fields are marked *

82  +    =  90

Back to Top

Search For Products

Product has been added to your cart