Huawei MA5683T

Huawei MA5683T

Huawei MA5683T H802MABO chassis with 6 service slots, 2xSCUN main control board, 2xPRTE DC power board

Huawei

3-5 days

Shenzhen Warehouse

SKU: Huawei MA5683T Category:

Description

MA5683T Overview

The MA5680T/MA5683T/MA5608T is a series of integrated fiber-copper access devices. They support ADSL2+, VDSL2, Vectoring, SuperVector, SHDSL, POTS, GPON, 10G GPON, and P2P access modes and provide Internet access, voice, and video services to subscribers. As a series of large-/medium-/small-capacity devices, they share the same software platform and service boards.

  • Large-capacity device: MA5680T
  • Medium-capacity device: MA5683T
  • Small-capacity device: MA5608T
Sopported Main Control Board and Service Board

Main control board:

  • SCUN(the most applications main control board, which comes with 4 GE uplink ports)
  • SCUH(supports 4 GE/10GE uplink ports)
  • SCUK

Uplink board:

  • X2CS(2*10GE optical interface board)
  • GICF(2*GE optical interface board)
  • GICG(2-port GE electrical interface bard)

Pon Service board:

  • 8 GPON ports interface board: GPBDGPBH, 16 GPON ports interface board: GPFD
  • 8 EPON ports interface board: EPBD, 16 EPON ports interface board: EPFD
  • 8 XGPON ports interface board: XGBD
  • 8 XEPON ports interface board: XEBD

MA5683T is PRTE DC power based, recommend AC/DC power converter ETP48100-B1-A1, ETP4860-B1A12 to change power solution.

Telecomate.com supports different OLT interface boards, AC/DC power converter, and uplink boards in stock for your choice.

 

MA5683T Layout

MA5683T

 

MA5683T Datasheet

 

Item MA5683T
Backplane bus switching capacity 1.5 Tbit/s
System L2 packet forwarding rate Power SCUB: 72 Mpps
SCUN: 726 Mpps(Active/Standby mode), 1452 Mpps(Load-sharing mode)
SCUK: 726 Mpps(Active/Standby mode), 1452 Mpps(Load-sharing mode)
SCUF: 190 Mpps
SCUH: 1428 Mpps(Active/Standby mode), 2856 Mpps(Load-sharing mode)
Control board switching capacity SCUB: 48 Gbit/s
SCUN: 480 Gbit/s(Active/Standby mode), 960Gbit/s(Load-sharing mode)
SCUK: 480 Gbit/s(Active/Standby mode), 960Gbit/s(Load-sharing mode)
SCUF: 128 Gbit/s
SCUH: 960 Gbit/s(Active/Standby mode), 1920Gbit/s(Load-sharing mode)
Switching/Forwarding delay Short forwarding delay:The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs.
BER in full load BER of port when transmitting data in full load < 10 e-7
System performance
System Redundant configuration
System availability in typical configuration >99.999%
Mean Time Between Failures (year) ≈45
Configuration
Maintenance port Number of 10 Mbit/s/100 Mbit/s maintenance Ethernet ports: 1
Number of serial ports for local/remote maintenance: 1
Monitoring port Number of environment monitoring serial ports: 1
Maximum number of GPON ports in a subrack 96
Maximum number of 10G GPON ports in a subrack 24
Maximum number of P2P FE ports in a subrack 288
Maximum number of P2P GE ports in a subrack 288
Maximum number of upstream ports (GE ports in the GIU slot) in a subrack 8
Maximum number of upstream ports (10GE ports in the GIU slot) in a subrack 4
Management ports
Outband management Ethernet port (RJ-45) SCUB/SCUN/SCUF/SCUH control board: 1 Port Board
Local serial port (Console) SCUB/SCUN/SCUF/SCUH control board: 1 Port Board
Upstream ports
GE electrical port GICE: 4 Ports Board
GICG: 2 Ports Board
GE optical port GICF/GICK: 2 Ports Board
SCUB/SCUN/SCUH/GICD/GSCA: 4 Ports Board
ETHB/SPUA/SPUF: 8 Ports Board
SPUC: 40 Ports Board
10GE optical port X2CS/SPUA: 2 Ports Board
SPUC: 4 Ports Board
SPUF: 8 Ports Board
E1 port TOPA: 16 Ports Board
STM-1 upstream optical port TOPA: 2 Ports Board
PON upstream optical port P2CA: 2 Ports Board  (One PON port is available and the other is backup.)
Service ports
GPON port GPBD/GPBH: 8 Ports Board
GPFD: 16 Ports Board
10G GPON port XGBC: 4 Ports Board
XGBD: 8 Ports Board
P2P GE optical port OPGD/OPGE: Single-fiber bi-directional: 48 Ports Board, Two-fiber bi-directional: 24 Ports Board
P2P FE optical port OPFA: 16 Ports Board
OPGD/OPGE: Single-fiber bi-directional: 48 Ports Board, Two-fiber bi-directional: 24 Ports Board
Ethernet optical port ETHB: 8 Ports Board
E1 port H802EDTB: 16 Ports Board
Device Specifications
Dimensions (W x D x H excluding mounting brackets) 442.00 mm x 283.20 mm x 263.90 mm
Dimensions (W x D x H, including mounting brackets) 535.00 mm x 283.20 mm x 263.90 mm, for ETSI cabinet
482.60 mm x 283.20 mm x 263.90 mm, for IEC cabinet
Weight (empty chassis) 7.0kg
Working environment temperature For an indoor cabinet
Configured with 1 subrack: -25°C to +65°C
Configured with 2 subracks: -25°C to +55°C
Working environment humidity 5% RH to 95% RH
Atmosphere pressure 61 kPa to 106 kPa
Altitude < 4000 m

Additional information

Weight 26.0000 kg
Dimensions 57.0000 × 48.0000 × 45.0000 cm
Item MA5680T (ETSI) MA5680T (IEC) MA5683T MA5608T
Supported cabinet Indoor cabinet: N63E-22, N66E-18

Outdoor cabinet: F01T500

Indoor cabinet: N66E-22

Outdoor cabinet: none

Indoor cabinet: N66E-18

Outdoor cabinet: F01S300, F01T500, F01T300

Indoor cabinet: N63E-22

Outdoor cabinet: F01S100, F01S200

Board configuration 2 slots for control boards

16 slots for service boards

1 slot for the universal interface board

2 slots for upstream interface boards

2 slots for power interface boards.

2 slots for control boards

14 slots for service boards

1 slot for the universal interface board

2 slots for upstream interface boards

2 slots for power interface boards.

2 slots for control boards

6 slots for service boards

1 slot for the universal interface board

2 slots for upstream interface boards

2 slots for power interface boards.

2 slots for control boards

2 slots for service boards

1 or 2 slots for the power interface board.

Supported control board and its switching capacity SCUB: 48 Gbit/s

SCUF: 128 Gbit/s

SCUN/SCUK: 480 Gbit/s in active/standby mode or 960 Gbit/s in load-sharing mode

SCUH/SCUV: 960 Gbit/s in active/standby mode or 1920 Gbit/s in load-sharing mode

MCUD/MCUD1/MCUE: 128 Gbit/s in active/standby mode or 256 Gbit/s in load-sharing mode
System Layer 2 packet forwarding rate SCUB: 72 Mpps

SCUF: 190 Mpps

SCUN/SCUK: 726 Mpps in active/standby mode or 1452 Mpps in load-sharing mode

SCUH/SCUV: 1428 Mpps in active/standby mode or 2856 Mpps in load-sharing mode

MCUD/MCUD1/MCUE: 190 Mpps in active/standby mode or 380 Mpps in load-sharing mode
Switching/Forwarding delay Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs.
BER in full load BER of a port when the port transmits data in full load < 10 e-7
System reliability specifications System: redundant configuration.

System availability for the typical configuration: > 99.999%

Mean time between failures (MTBF): about 45 years.

NOTE:

Due to different network environments and different boards used by devices, the preceding MTBF (45 years) of the MA5600T/MA5603T/MA5608T is only for reference. The average repair time for field replaceable units (FRUs) is about 2 hours. The preceding values are only for reference. For details, contact the related Huawei engineers.

Maximum number of ADSL2+ ports in a subrack 1024 896 384 128
Maximum number of VDSL2 ports in a subrack 1024 896 384 128
Maximum number of Vectoring ports in a subrack 768 768 384 N/A
Maximum number of SuperVector ports in a subrack N/A N/A 384 N/A
Maximum number of EFM SHDSL ports in a subrack 512 448 192 64
Maximum number of TDM SHDSL ports in a subrack 256 224 96 32
Maximum number of POTS ports in a subrack 1024 896 384 128
Maximum number of ISDN BRA ports in a subrack 512 448 192 64
Maximum number of ISDN PRA ports in a subrack 64 64 64 64
Maximum number of GPON ports in a subrack 256 224 96 32
Maximum number of 10G GPON ports in a subrack 128 112 48 16
Maximum number of P2P FE ports in a subrack 768 672 288 96
Maximum number of P2P GE ports in a subrack 768 672 288 96
Maximum number of upstream ports (GE ports in the GIU slot) in a subrack 8 8 8 N/A
Maximum number of upstream ports (10GE ports in the GIU slot) in a subrack 4 4 4 N/A
Maximum number of upstream ports (PON ports in the GIU slot) in a subrack 1 1 1 N/A
Maximum number of upstream ports (ports on the control board) in a subrack SCUB/SCUF: 4 x GE (in the active/standby mode)

SCUN/SCUK: 8 x GE (in the load-sharing mode)

SCUH/SCUV: 8 x 10GE/GE (in the load-sharing mode)

MCUD/MCUE: 8 x GE (in the load-sharing mode)

MCUD1: 4 x GE + 2 x 10GE/GE (in the load-sharing mode)

Maximum number of extended subracks connected to a master subrack 32 32 32 N/A
Maximum number of ONUs supported by each subrack
  • For Layer 2 applications, the maximum number of ONUs supported by each subrack is determined based on the number of MAC addresses and service flows supported by the control board, as well as the number of MAC addresses and service flows planned for the ONUs.
  • For Layer 3 applications, the maximum number of ONUs supported by each subrack is determined based on the number of routes and ARP entries supported by the control board.

Q: Can the SCUH main control board be provided?

A: SCUH has limited resouces in the market, if you need it, please contact our sales team: [email protected]

 

Q: Do you provide configuration manual to me if i purchase MA5683T from Telecomate.com?

A: Yes, you may contact our sales team to get related documents.

 

Q: Does MA5683T support AC power supply?

A: No, but you can purchase one AC/DC power converter.

 

Q: Which 10G GPON boards can the MA5680T be configured with?
A: XGBC, XGBD.

2 reviews for Huawei MA5683T

  1. 5 out of 5

    Martin

    The price is good and the date is new.

  2. 5 out of 5

    John

    It’s all good except that it’s heavy.


Add a review

has been added to your cart:
Checkout