- Packing info
- Reviews (2)
Huawei OLT compatible K662d is an all-in-one FTTR slave optical modem router that supports Wi-Fi 6, supports ultra-broadband access through fiber/Ethernet uplink technology, and provides users with Gigabit dual-band Wi-Fi 6 and twp Gigabit Ethernet ports.
Please note: This device can only be used in conjunction with the main optical network terminal, HN8145XR, and it is forbidden to use it alone.
Next-generation Wi-Fi 6 wireless technology MU-MIMO
Support fiber uplink, support FTTR evolution
VR/4K over Wi-Fi
Strong anti-interference, wide-coverage, network self-healing
K662d interface parameters
|Optical interface Gigabit||Ethernet port|
|Interface type: SC/UPC||2*GE Ports MAC address learning|
|transmission rate: downlink rate 2.488Gbit/s, uplink rate 1.244Gbit/s||Support 10Mbit/s, 100Mbit/s, 1000Mbit/s adaptive|
|interface||Network side: fiber or GE uplink
● Fiber uplink: 2GE+2.4GHz&5GHz Wi-Fi6
● GE uplink: 1GE+2.4GHz&5GHz Wi-Fi6
|Memory||128MB Flash，256MB RAM|
|Fiber Connector type||SC/UPC|
|Antennas Gain||2.4GHz Wi-Fi 6: 2dBi 5GHz Wi-Fi 6: 4dBi|
|Air Interface Rate||574 Mbps (2.4GHz) 2402 Mbps (5GHz)|
|Mimo||2×2 MIMO (2.4GHz&5GHz)|
|Protocol||IEEE 802.11 ax (2.4GHz&5GHz)|
|Antennas Type||Six built-in antennas|
|Power Supply||12V DC, 1 A 170 ～ 240 V AC， 50/60 Hz 12W|
|Size and Weight||Diameter: φ109~φ117mm Height: 145mm 700g(without PSU)|
It provides Gigabit Dual-frequency Wi-Fi 6 and TWP Gigabit Ethernet ports, with attractive appearance, nice.
The materials purchased for a local villa FTTR solution are well-packaged and the logistics is fast. The effect will not be known until the customer has installed it.