Huawei switch S5700-48TP-SI-AC supports 48 10/100/1000BASE-T ports, 4 GE SFP combo ports, fixed AC power


3-5 days

Shenzhen Warehouse


S5700-48TP-SI-AC overview

Huawei S5700-48TP-PWR-SI with 48 Ethernet 10/100/1000 ports, 4 of which are dual-purpose 10/100/1000 or SFP ports, which is one of the S5700-SI series switches.

The S5700-SI series are gigabit Layer 3 Ethernet switches based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It employs simple and convenient means of installation and maintenance to reduce customers’ OAM cost and help enterprise customers build a next-generation IT network.

Telecomate.com provides a full range of Huawei switches, optical modules, extension boards, if you have more demands, please contact [email protected].


S5700-48TP-SI-AC quick specs

48 10/100/1000BASE-T ports

4 GE SFP combo ports

fixed AC power

Forwarding performance is 72 Mpps


S5700-48TP-SI-AC appearance and structure
1. Forty-four PoE+ 10/100/1000BASE-T ports 6. ESD jack
2. Four combo ports (10/100/1000BASE-T + 100/1000BASE-X) 7. Rear card slot
3. One console port 8. Fan slot
4. One ETH management port 9. Power module slot 2
5. One USB port 10. Power module slot 1
S5700-48TP-PWR-SI datasheet
Item S5700-48TP-SI-AC
Fixed port 48 10/100/1000 ports, 4 GE SFP combo ports
Extended slot Provides an extended slot for a stack card
Forwarding performance 72 Mpps
Guest VLAN and voice VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series)
Reliability RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series)
BPDU protection, root protection, and loop protection
MPLS features Not supported
IP routing Static routing, ECMP
IPv6 features Neighbor Discovery (ND)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series)
Multicast IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Controllable multicast
Port-based multicast traffic statistics
QoS/ACL Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
Security User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
OAM Supports
Management and maintenance Virtual cable test
MAC Forced Forwarding (MFF)
Port mirroring and RSPAN (remote port mirroring)
Remote configuration and maintenance using Telnet
SNMP v1/v2/v3
System logs and alarms of different levels
DDR memory 256 MB
Flash memory 32 MB
Mean time between failures (MTBF) S5700-48TP-SI-AC: 34 years
Mean time to repair (MTTR) 2 hours
Availability > 0.99999
Surge protection: Service port protection Non-PoE switch: ±2 kV in common mode
Surge protection: Power supply protection Non-PoE switch: AC: ±6 kV in differential mode; ±6 kV in common mode
Stack port Two stack ports available on each stack card
Maximum stack bandwidth (bidirectional) 48 Gbit/s
RPS Not supported
PoE The PWR series support PoE.
Input AC voltage: Rated input voltage range 100 V AC to 240 V AC, 50/60 Hz
Input AC voltage: Maximum voltage range 90 V AC to 264 V AC, 47 Hz to 63 Hz
Maximum system power consumption (100% throughput, 100% PoE loads, full speed of fans) S5700-48TP-SI-AC: 64 W
Operating temperature 0°C to +50°C
Storage temperature -40°C to +70°C
Noise under normal temperature (27°C, sound power) S5700-48TP-SI-AC: 0
Relative humidity 5% RH to 95% RH, noncondensing
Operating altitude Non-PoE switch: AC: 0 m to 5000 m
EN55022 Class A
ETSI EN 300 386 Class A
CFR 47 FCC Part 15 Class A
ICES 003 Class A
ITU-T K 20
ITU-T K 44
Environmental standards RoHS
Security IEC 60950-1
EN 60950-1/A11/A12
UL 60950-1
CSA C22.2 No 60950-1
AS/NZS 60950.1
Laser safety IEC60825-1
Dimensions (W x D x H) 442.0 mm x 420.0 mm x 43.6 mm
Fully loaded ≤ 8.5 kg
Empty loaded ≤ 5 kg

Additional information

Weight 9.0000 kg
Dimensions 59.5000 × 57.7000 × 12.0000 cm

1 review for S5700-48TP-SI-AC

  1. 5 out of 5


    Diseño de sitio web fácil de usar, puede encontrar rápidamente el producto que desea.

Add a review

has been added to your cart: