TN22SCC

0 Reviews Write a review
SKU2036530
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei TN22SCC OptiX OSN 8800 system control and communication board

Description

TN22SCC Overview

TN22SCC OptiX OSN 8800 system control and communication board

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Valid slots for the TN22SCC board in T64 subrack

Product Valid Slots
OptiX OSN 3800 chassis IU8, IU9
Item TN22SCC
Basic function Accomplishes the configuration management and alarm output of an NE.
DCN communication Supports interconnection and communication between NEs through IP over DCC, or HWECC.
Active/standby backup Supported: In DC-powered systems, the two SCCs are used to provide 1+1 hot backup. If the active SCC fails, the standby SCC becomes active automatically.
NOTE:
Active/standby backup configuration is not supported in AC-powered systems.
Clock function Provides clock source for the system communications.
Optical-layer ASON Not supported
Electrical-layer ASON Not supported

Additional information

Item TN22SCC
Basic function Accomplishes the configuration management and alarm output of an NE.
DCN communication Supports interconnection and communication between NEs through IP over DCC, or HWECC.
Active/standby backup Supported: In DC-powered systems, the two SCCs are used to provide 1+1 hot backup. If the active SCC fails, the standby SCC becomes active automatically.
NOTE:
Active/standby backup configuration is not supported in AC-powered systems.
Clock function Provides clock source for the system communications.
Optical-layer ASON Not supported
Electrical-layer ASON Not supported

Reviews

There are no reviews yet.

Be the first to review “TN22SCC”

Your email address will not be published. Required fields are marked *

88  ⁄    =  44

Back to Top

Search For Products

Product has been added to your cart