Home/Transport Network/OSN 9800 Series/OSN 9800 M Series/TNG2M504S
TNG2M504S
TNG2M504S
TNG2M504S
TNG2M504S
Categories:,

TNG2M504S

0 Reviews Write a review
SKU2036084
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 TNG2M504S 2 x 100Gbit/s Service Multiplexing Into 1 x 200G Wavelength Conversion Board

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

TNG2M504S Overview

TNG2M504S 2 x 100Gbit/s Service Multiplexing Into 1 x 200G Wavelength Conversion Board, applied to Huawei OptiX OSN 9800 M05/M12/M24.

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

The TNG2M504S board has only one variant: TNG2M504ST33.

 

Valid slots for the TNG2M504S board in a M05/M12/M24 subrack

Device Number of Occupied Slots Physical Slot Logical Slot
OptiX OSN 9800 M05 1 IU1, IU2, IU3, IU4, IU5 IU1, IU2, IU3, IU4, IU5
OptiX OSN 9800 M12 1 IU1 to IU13 IU1 to IU13
OptiX OSN 9800 M24 1 IU1 to IU24 IU1 to IU24
Item TNG2M504S
Functions and Features of the TNG2M504S Board (OTU)
Basic function The board can convert client-side services into OTU signals,the client-side service supports hybrid transmission of different services, for details about the service types, number of channels, and mapping paths supported by different ports, see Applications.
Client-side service type
  • OTU4: OTN service at a rate of 111.81 Gbit/s
  • 100GE: Ethernet service at a rate of 103.125 Gbit/s
  • 40GE: Ethernet service at a rate of 41.25 Gbit/s
  • 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
Service mapping mode
  • ODU4: Bit Transparent Mapping ODU4, MAC Transparent Mapping ODU4.
  • ODU3: TTT+GMP.
  • ODU2(e): Bit Transparent Mapping(11.1G IMP+BMP), MAC Transparent Mapping(10.7G).
  • ODUflex: MAC Transparent Mapping(GFP-F).
WDM specification Supports the DWDM specifications.
Tunable wavelength Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
FEC coding
  • Client side: Supports FEC coding when the client-side service type is OTU4.
  • Client side: Supports RSFEC coding when the client-side service type is 100GE.
  • WDM side: Supports SDFEC2 coding.
Line modulation format 200G QPSK, 200G QPSK wDCM
Typical channel spacing
  • 200G QPSK wDCM: 100GHz+n*6.25GHz(n=0,1,2...)
  • 200G QPSK: 75GHz+n*6.25GHz(n=0,1,2...)
OTN overhead
  • ODU2/ODU3/ODUC2 layer: supports PM and TCM overhead processing.
  • ODUflex layer: supports TCM overhead processing.
  • ODU4 layer:
    • Supports PM and TCM overhead processing when 100GE services are received on the client side.
    • Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads.
  • Supports SM overhead processing at the OTU4 layer on the client side.
  • OTUC2 layer: supports SM overhead processing on the WDM side.
LPT Supports the LPT function when the client-side service is 10GE LAN.
Intra-board 1+1 protection Supported
NOTE:
Supports intra-board 1+1 protection when working with optical protection boards.
Client 1+1 protection Supported
NOTE:
  • When an MPO optical module is used on the client side, the M504S board does not support client 1+1 protection.
  • When 100GE/40GE services are received on the client side, client 1+1 protection supports bidirectional switching rather than unidirectional switching. When OTU4 services are received on the client side, client 1+1 protection supports unidirectional switching.
ODUk SNCP Not Supported
Tributary SNCP Not Supported
Optical-layer ASON Supported
L1 service encryption When the client-side service type is 10GE/40GE/100GE, the board supports the bidirectional service encryption.
Digital optical label When LS Ability is enabled, the board supports loading low-frequency pilot-tone modulation signals and overheads during wavelength conversion, and can work the optical-layer board that supports the digital optical label function to detect optical power and overheads and report optical performance data.
ALS Supports the ALS function on the client side when client services are non-OTN services.
LLDP When the client-side service type is 10GE LAN/40GE/100GE, the board supports the LLDP function.
NOTE:
When the service mapping mode is MAC transparent mapping, the LLDP mode of the port is the Receive mode by default. In this case, LLDP packets are not transparently transmitted.
Physical clock
  • Supports synchronous Ethernet processing instead of synchronous Ethernet transparent transmission when receiving 100GE(Bit Transparent Mapping)/40GE(TTT+GMP) services on the client side.
  • Supports synchronous Ethernet transparent transmission instead of synchronous Ethernet processing when receiving 100GE(MAC transparent mapping)/10GE LAN(MAC transparent mapping(10.7G)) services on the client side.
NOTE:
The Bit Transparent Mapping (11.1G IMP+BMP) mode does not support synchronous Ethernet transparent transmission.
IEEE 1588v2 Supported when the client-side service type is 100GE (MAC transparent mapping ODU4). Supported when the client-side service type is 10GE LAN (MAC transparent mapping (10.7G)).
ITU-T G.8275.1 Supported
ITU-T G.8273.2 Supported
Outband DCN Supports ESC communication.
Test frame Supported when the client-side service type is 100GE/40GE/10GE LAN(MAC transparent mapping(10.7G)).
NOTE:
For Ethernet test frames, only one interface can be used to send them at a time.
PRBS
  • Supports the PRBS function on the WDM side.
  • The PRBS function in the client-side optical port direction is supported only when the service type is OTU4.
  • PRBS signals can be sent from the client-side optical port to the system side when client services are non-OTN services.
NOTE:
The client-side PRBS function is not supported when the board accesses 4 x 10GE signals.
Latency measurement
  • Supports PM and TCM latency measurement for upstream higher-order ODU channels.
  • Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side.
  • Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side.
NOTE:
In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
Port loopback
  • Supports inloops and outloops on the WDM side.
  • Supports inloops and outloops on the client side.
  • Supports ODUk inloops and ODUk outloops on the client side.
NOTE:
Client-side loopback is not supported when the port accesses 4 x 10GE LAN signals.
Alarm and performance event monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Supports the monitoring of CD and PMD performance.
Functions and Features of the TNG2M504S Board (Regeneration)
Basic function Electrically regenerates optical signals at an electrical REG station.
Regeneration mode Unidirectional regeneration
Regeneration rate OTUC2
WDM specification Supports the DWDM specifications.
Tunable wavelength Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
FEC coding SDFEC2
Line modulation format 200G QPSK, 200G QPSK wDCM
Typical channel spacing
  • 200G QPSK wDCM: 100GHz+n*6.25GHz(n=0,1,2...)
  • 200G QPSK: 75GHz+n*6.25GHz(n=0,1,2...)
OTN overhead
  • WDM-side OTUC2 layer: supports SM overhead processing.
  • ODUC2 layer: supports PM and TCM overhead processing.
Optical-layer ASON Supported
ALS Supported
Outband DCN Supports ESC communication.
Alarm and performance event monitoring
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports CD and PMD performance monitoring.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TNG2M504S”

Your email address will not be published. Required fields are marked *

  +  74  =  76

Related products

TNV5U220-1
Quick view
Categories1: , ,

TNV5U220

R.F.Q
SKU2012910
TNV2T601-1TNV2T601-4
Quick view
Categories1: ,

TNV2T601

R.F.Q
(1)
SKU2012919
TNU5N404C01-1
Quick view
Categories1: ,

TNU5N404C01

R.F.Q
(1)
SKU2009716
TNV5U210-1
Quick view
Categories1: , ,

TNV5U210

R.F.Q
SKU2012882
TNS7N402-1TNS7N402-2
Quick view
Categories1: ,

TNS7N402

R.F.Q
(1)
SKU2012864
TNS2N220-1
Quick view
Categories1: ,

TNS2N220

R.F.Q
(2)
SKU2012850
Main Menu
Back to Top

Search For Products

Popular
Product has been added to your cart