Home/Transport Network/OSN 9800 Series/OSN 9800 M Series/TNG3M504D
TNG3M504D
TNG3M504D
TNG3M504D
TNG3M504D
Categories:,

TNG3M504D

0 Reviews Write a review
SKU2036082
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 TNG3M504D 4 x 100Gbit/s Service Multiplexing Into 2 x 200G/100G Programmable Wavelength Conversion Board

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

TNG3M504D Overview

TNG3M504D 4 x 100Gbit/s Service Multiplexing Into 2 x 200G/100G Programmable Wavelength Conversion Board, applied to Huawei OptiX OSN 9800 M05/M12/M24.

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

The TNG3M504D board has only one variant: TNG3M504DC01.

 

Valid slots for the TNG3M504D board in a M05/M12/M24 subrack

Device Number of Occupied Slots Physical Slot Logical Slot
OptiX OSN 9800 M05 1 IU1, IU2, IU3, IU4, IU5 IU1, IU2, IU3, IU4, IU5
OptiX OSN 9800 M12 1 IU1 to IU13 IU1 to IU13
OptiX OSN 9800 M24 1 IU1 to IU24 IU1 to IU24
Item TNG3M504D
Functions and Features of the TNG3M504D Board (OTU)
Basic function The board can convert client-side services into OTU signals,the client-side service supports hybrid transmission of different services, for details about the service types, number of channels, and mapping paths supported by different ports, see Applications.
Client-side service type
  • 100GE: at a rate of 103.125 Gbit/s
  • OTU4: at a rate of 111.81 Gbit/s
Service mapping mode 100GE: Bit Transparent Mapping ODU4, MAC Transparent Mapping ODU4.
WDM specification Supports the DWDM specifications.
Tunable wavelength When a wavelength-tunable optical module is configured, WDM-side optical signals are tunable in Super C band (1524 nm to 1573 nm).
FEC coding Client side:
  • 100GE: RSFEC
  • OTU4: FEC
WDM side:
  • 200G 16QAM: SDFEC
  • 200G 16QAM-H: SDFEC
  • 200G e16QAM: SDFEC2
  • 200G m16QAM: SDFEC
  • 200G QPSK: SDFEC4
  • 100G QPSK: SDFEC2
  • 100G QPSK wDCM: SDFEC2
Line modulation format
  • 100G QPSK
  • 100G QPSK wDCM
  • 200G e16QAM
  • 200G 16QAM
  • 200G 16QAM-H
  • 200G m16QAM
  • 200G QPSK
Typical channel spacing
  • 200G e16QAM: 50GHz+n*6.25GHz(n=0,1,2...)
  • 200G QPSK: 75GHz+n*6.25GHz(n=0,1,2...)
  • Others modulation format: 50GHz*n(n=1,2...)(Only the standard center frequency of 50 GHz is supported.)
OTN overhead protocol Uses the frame format and overhead processing compliant with ITU-T G.709.
OTN overhead
  • At the ODU4 layer:
    • Supports PM overhead processing when 100GE services are received on the client side.
    • Supports the processing and non-intrusive monitoring of PM and TCM overheads when OTU4 services are received on the client side.
  • At the ODUC2 layer: supports the processing of PM and TCM overheads.
  • Supports SM overhead processing at the OTUk layer on the WDM side.
  • Supports SM overhead processing at the OTUk layer on the client side.
LPT Not Supported
Intra-board 1+1 protection Supported
NOTE:
Implemented with optical protection boards.
Client 1+1 protection Supported
ODUk SNCP Not Supported
Tributary SNCP Not Supported
Optical-layer ASON Supported
L1 service encryption Supported
NOTE:
When the client-side service type is OTU4, the board does not support the service encryption.
Digital optical label When LS Ability is enabled, the board supports loading low-frequency pilot-tone modulation signals and overheads during wavelength conversion, and can work the optical-layer board that supports the digital optical label function to detect optical power and overheads and report optical performance data.
ALS Supports the ALS function on the client side when client services are non-OTN services.
LLDP Supported
NOTE:
  • LLDP only supports RX and DISABLE modes.
  • Supports only Ethernet II frames without VLAN tags.
Physical clock
  • Client side:
    • Supports synchronous Ethernet processing when 100GE(MAC transparent mapping ODU4) services are received on the client side.
    • Supports synchronous Ethernet transparent transmission when 100GE(Bit transparent mapping ODU4) services are received on the client side.
  • WDM side:
    • When the WDM-side rate is 200G, the board supports the physical clock.
    • When the WDM-side rate is 100G, the board does not support the physical clock.
IEEE 1588v2 Supported when 100GE(MAC transparent mapping ODU4) services are received on the client side.
ITU-T G.8275.1 Supported
ITU-T G.8273.2 Supported
Outband DCN Supported
NOTE:
Supported when OTUk services are received.
Test frame Supported when the client-side service type is 100GE.
PRBS
  • PRBS signals can be sent from the client-side optical port to the system side.
  • The PRBS function in the client-side optical port direction is supported only when the service type is OTN.
  • Supports the PRBS function on the WDM side optical port direction.
Latency measurement
  • Supports PM and TCM latency measurement for upstream higher-order ODU channels.
  • Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side.
  • Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side.
NOTE:
In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
Channel loopback Not supported.
Port loopback
  • Supports client-side inloops and outloops.
  • Supports WDM-side inloops and outloops.
NOTE:
When the line-side rate is 100 Gbit/s, WDM-side loopback is not supported.
Alarm and performance event monitoring
  • Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line failures.
  • Supports the monitoring of OTN alarms and performance events.
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Supports the monitoring of CD and PMD performance.
  • Supports the monitoring of the bias current of the laser.
  • Supports the monitoring of the temperature of the laser.
  • Supports the monitoring of the optical power.
Functions and Features of the TNG3M504D Board (Regeneration)
Basic function Applies to electrical regeneration sites to provide the electrical regeneration function for optical signals.
Regeneration mode Unidirectional regeneration
Regeneration rate
  • OTU4
  • OTUC2
WDM specification Supports the DWDM specifications.
Tunable wavelength When a wavelength-tunable optical module is configured, WDM-side optical signals are tunable in Super C band (1524 nm to 1573 nm).
FEC coding
  • SDFEC2
  • SDFEC
  • SDFEC4
Line modulation format
  • 100G QPSK
  • 100G QPSK wDCM
  • 200G e16QAM
  • 200G 16QAM
  • 200G 16QAM-H
  • 200G m16QAM
  • 200G QPSK
Typical channel spacing
  • 200G e16QAM: 50GHz+n*6.25GHz(n=0,1,2...)
  • 200G QPSK: 75GHz+n*6.25GHz(n=0,1,2...)
  • Others modulation format: 50GHz*n(n=1,2...)(Only the standard center frequency of 50 GHz is supported.)
OTN overhead protocol Uses the frame formats and overhead processing methods defined in ITU-T G.709.
OTN overhead
  • ODU4 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
  • ODUC2 layer: supports PM and TCM overhead processing.
  • Supports SM overhead processing at the OTUC2/OTU4 layer on the WDM side.
Optical-layer ASON Supported
NOTE:
For the WDM-side A15/A24 optical module, the receive and transmit wavelengths must be the same. Both A15 and A24 modules do not support wavelength change for unidirectional regeneration
ALS Supported
Clock In relay mode, transparent transmission of the physical clock is supported, but the physical clock synchronization is not supported.
Outband DCN Supported
Test frame Not supported.
PRBS Not supported.
Port loopback Not supported.
Alarm and performance event monitoring
  • Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line failures.
  • Supports the monitoring of OTN alarms and performance events.
  • Supports the monitoring of CD and PMD performance.
  • Supports the monitoring of the bias current of the laser.
  • Supports the monitoring of the temperature of the laser.
  • Supports the monitoring of the optical power.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TNG3M504D”

Your email address will not be published. Required fields are marked *

58  −  50  =  

Related products

TNV8T404-1TNV8T404-4
Quick view
Categories1: ,

TNV8T404

R.F.Q
SKU2012908
TNV8T402-4
Quick view
Categories1: ,

TNV8T402

R.F.Q
(1)
SKU2012887
OSN-9800-U32
Quick view
Categories1: ,

OSN 9800 U32 Standard

R.F.Q
(2)
SKU2012873
Quick view
Categories1: ,

OSN 9800 U64 Enhanced

R.F.Q
(1)
SKU2012921
TNS2N401-1
Quick view
Categories1: ,

TNS2N401

R.F.Q
(1)
SKU2012857
TNU5U401-1
Quick view
Categories1: ,

TNU5U401

R.F.Q
(1)
SKU2012917
Main Menu
Back to Top

Search For Products

Popular
Product has been added to your cart