$0.00 Original price was: $0.00.Current price is: $0.00.
Huawei H801X2CS 2-port GE/10GE optical uplink board without SFP+ Module, apply to Huawei MA5680T/MA5683T
The H801X2CS board is a 2-port GE/10GE uplink board, which provides two GE/10GE upstream or cascading optical ports, can be used in the Huawei MA5600T series OLTs: MA5683T MA5680T.
This board comes without any optical transceivers, it is supposed to work with 10GE SFP+ modules: 10GE 0.3km SFP+ , 10GE 10km SFP+.
| Item | H801X2CS |
| Port | 2 GE/10GE Uplink Ports |
| Pluggable Module | SFP+ Module |
| Corresponding Control Board | SCUF/SCUN/SCUL/SCUH |
| Dimensions (mm) | 25.40 (W) x 237.00 (D) x 197.20 (H) |
| Power Consumption | Static: 17.6 W Maximum: 18 W |
| Maximum Frame Size | 2052 bytes. After jumbo frame function is enabled, a maximum of 9216 bytes can be supported |
| Operating temperature | -25°C to +65°C |
| Board | Clock Feature | Port | Whehter the Port Supports Pluggable Module | |
| Optical Module | Electrical Module | |||
| H801GICF | × | Two GE ports | √ (SFP) | √ (SFP) |
| H801GICG | × | Two GE electrical ports | × | × |
| H801GICK | GE synchronous Ethernet | Two GE ports | √ (SFP) | × |
| H801GSCA | GE synchronous Ethernet | Four GE ports | √ (SFP) | × |
| H801X1CA | × | One 10GE port | √ (XFP) | × |
| H801X2CA | × | Two 10GE ports | √ (XFP) | × |
| H801X2CS | 10GE synchronous Ethernet | Two 10GE ports | √ (SFP+) | × |
| H802P2CA | × | Two PON ports | √ (SFP) | × |
What control and switching capabilities does the MA5608T provide?
The MA5608T supports dual-control-board architecture and provides high switching throughput with carrier-grade forwarding performance. It supports L2/L3 edge access features, including VLAN, QinQ, QoS, multicast, and user authentication.
What are the most common operational issues with the MA5600 Series?
Typical issues encountered in the field include:
1. ONU drop / optical power fluctuations due to ODN attenuation or fiber aging
2. Control board switchover failure caused by mismatched versions
3. IPTV freezing triggered by incomplete multicast configuration or insufficient uplink bandwidth
4. ONU not registering due to OMCI compatibility problems
5. Device reboot caused by fan or power module aging
Routine power-level inspections, board version checks, and temperature monitoring can significantly reduce risks.
Does the MA5600 Series support IPv6? Will software upgrades be required?
Yes. IPv6 is supported when:
The control board runs a software version that includes IPv6 features.
ONUs/ONTs support IPv6 (bridge or routing mode).
The broadband service is configured for IPv6 address assignment (SLAAC/PD/DHCPv6).
A unified IPv6 plan is recommended to avoid routing inconsistencies.
What is the maximum access capacity supported by the MA5608T chassis?
Depending on installed service boards, the MA5608T can support up to:
1. 4,096 GPON subscribers (with typical 1:64 split ratio)
2. 2 service slots for PON boards
Actual capacity depends on optical budget, splitter design, and upstream network planning.
Which uplink options are supported?
The MA5608T supports GE and 10GE uplink interfaces through dedicated uplink boards, enabling flexible integration into aggregation or core networks. Link protection and redundant uplink configurations are supported.
| Weight | 2.5000 kg |
|---|---|
| Dimensions | 34.0000 × 25.5000 × 10.0000 cm |
| MA5600T | |
| Lead Time | 3-5 days |
| Brand | Huawei |
| Ship From | Shenzhen Warehouse |
.svg)
.svg)
Javier Gonzales –
I wanna get the diference between the H801X2CS and H802X2CS, the account manager of Telecomate.com told me that H802X2CS board supports Pluggable Electrical Module, but the H801 one no, which help us a lot in the procurement process.
Crystal –
Fast delivery. Happy with the product and service all the time. This board works well with my OLT.