Author - TMAdmin

Change the SSID and password of HG8245H

Most Huawei ONTs have the Wi-Fi function. Of course, there are some ONTs do not have the Wi-Fi function. This post will describe how to change the user password, and SSID of the Huawei ONT. For Huawei ONTs with Wi-Fi functions, such as HG8045, HG8045A, HG8245, HG8245H, HG8245Q, HG8245T, HG8247...

The-difference-between-PPPoE-and-DHCP

The difference between PPPoE and DHCP

What is DHCP? DHCP (Dynamic Host Configuration Protocol) is a standardized client/server network protocol that dynamically assigns IP addresses and other related configuration information to network devices. As you know, each device in a TCP/IP network should have a unique IP address to access the network. Therefore, if your network...

Differences between EPON and GPON

Nowadays, optical network technologies are becoming more and more popular. When it comes to optical networks, EPON and GPON technologies are the most discussed. This post will briefly describe the differences between these two technologies.   Technical apecification Ethernet Passive Optical Network (EPON) is an Ethernet-based PON technology. It adopts the point-to-multipoint...

Multicast Forwarding Mode Incorrect Due to Multicast Service Fault

This topic describes how to solve the fault multicast forwarding mode incorrect due to multicast service unavailable of the MA5800. Fault Type Multicast service Keyword Multicast unavailable Fault Description When the user VLAN is the same as the multicast VLAN, the multicast service is normal; however, when the user VLAN is different from the multicast...

The Physical Status of GE Interfaces Cannot Go Up

This chapter describes common causes of the fault that the physical status of GE interfaces cannot Go Up of NetEngine 8100 M14/M8, NetEngine 8000 M14/M14K/M8K/M8/M4 & NetEngine 8000E M14/M8 series, and provides the corresponding troubleshooting flowcharts and examples. Common Causes This fault is commonly caused by one of the following: Optical...

The ONT configuration status fails

Hello everyone! Today I would like to share with you a case about the fact that the ONT configuration status fails. See more information shown below. Product model: MA5608T   Issue description   After an ONT(here we use EG8141A5) is added to the MA5608T, a user runs the display ont info command to query the ONT status. The...

Broadband-Remote-Access-Server

Broadband Remote Access Server

What is BRAS? BRAS, which is called Broadband Remote Access Server, is a new type of access gateway for broadband network applications. It is the bridge between the backbone of broadband access network, providing basic access means and management functions of broadband access network. It is located at the edge...

How to set 5G WiFi on the ONT

Hello, everyone! Now, I want to share with you how to set 5G WiFi on the ONT. First of all, I want to explain to you that 5G here is different from the 5G we already know.   Differences between 5G and 5GHz   5G and 5 GHz Wi-Fi technically, they do have some...