The ETP48400-C4A1 is an embedded power system that converts AC power into DC power. It supplies –48 V or –57 V constant voltage to load equipment. Its maximum capacity is 24 kW. It apply to newly built sites as well as capacity expansion and reconstruction scenarios of existing sites. It can disconnect each secondary load separately and supports precise metering of the power consumption of each user.
|
(1) User 1: LLVD power distribution |
(2) Power distribution label |
(3) AC output circuit breakers |
|
(4) Ground screw |
(5) Standby AC input module |
(6) AC input module |
|
(7) User 3: LLVD power distribution |
(8) User 3: BLVD power distribution |
(9) Common load circuit breaker |
|
(10) SMU02C |
(11) Space for rectifiers/Space for installing the SSU |
(12) UIM05B1 |
|
(13) Reserved slot for communications expansion module CIM02C/NIM01C3 |
(14) Battery circuit breakers |
(15) User 2: BLVD power distribution |
|
(16) User 2: LLVD power distribution |
(17) User 1: BLVD power distribution |
|
(1) User wiring screws |
(2) AC output circuit breakers |
(3) Ground screw |
|
(4) Standby AC input module |
(5) AC input module |
(6) User 3: LLVD power distribution |
|
(7) User 3: BLVD power distribution |
(8) Common load circuit breaker |
(9) SMU02C |
|
(10) Space for rectifiers/Space for installing the SSU |
(11) UIM05B1 |
(12) Reserved slot for communications expansion module CIM02C/NIM01C3 |
|
(13) Power distribution label |
(14) Battery circuit breakers |
(15) User 2: BLVD power distribution |
|
(16) User 2: LLVD power distribution |
(17) User 1: BLVD power distribution |
(18) User 1: LLVD power distribution |
|
(1) User 1: LLVD power distribution |
(2) Power distribution label |
(3) AC output circuit breakers |
|
(4) Ground screw |
(5) Standby AC input module |
(6) AC input module |
|
(7) User 3: LLVD power distribution |
(8) User 3: BLVD power distribution |
(9) Common load circuit breaker |
|
(10) SMU02C |
(11) Space for rectifiers/Space for installing the SSU |
(12) UIM05B1 |
|
(13) Reserved slot for communications expansion module CIM02C/NIM01C3 |
(14) Battery circuit breakers |
(15) User 2: BLVD power distribution |
|
(16) User 2: LLVD power distribution |
(17) User 1: BLVD power distribution |
|
Project |
ETP48400-C4A1 (01074762/01075024) |
ETP48400-C4A1 (01075024-002) |
ETP48400-C4A1 (01074762-004/01075024-003) |
|---|---|---|---|
|
AC input system |
220/380 V AC three-phase four-wire |
||
|
AC power distribution |
|
||
|
DC power distribution |
Three users in total, each of which includes:
Common load circuit breaker: one 1-pole 32 A circuit breaker Battery: four 1-pole 125 A circuit breakers; one 1-pole 125 A circuit breaker can be added. |
Three users in total, each of which includes:
Common load circuit breaker: one 1-pole 32 A circuit breaker Battery: four 1-pole 125 A circuit breakers; one 1-pole 125 A circuit breaker can be added. |
Three users in total, each of which includes:
|
|
Components |
|
||
|
AC surge protection |
Nominal surge discharge current: 30 kA (8/20 µs), five times respectively in the positive and negative directions |
||
If you have any questions, please feel free to contact: csd@telecomate.com.
Leave a comment