$0.00 Original price was: $0.00.Current price is: $0.00.
Huawei H802XEBD 8-port 10G EPON OLT interface board with 10G EPON PRX30 XFP Optical Module
Huawei 8-port 10G EPON OLT interface card with 10G EPON PRX30 XFP Optical Module, which can be used in the Huawei MA5600T series OLTs: MA5608T MA5683T MA5680T.
Support split ration 1:256
Transmit Speed: 10.3125Gbit/s、1.25Gbit/s
Receive Speed: 1.25Gbit/s
Interface Type: SC/PC
10G-EPON Optical Module Overload Optical Power: -9.38dBm
XEBD can maximum access 8*256 10G EPON subscribers.
| Item | H802XEBD |
| Service ports | |
| GPON Port | 8-port 10G EPON |
| GPON SFP+ Module Specification | |
| Type | One-fiber bi-directional optical module |
| Operating Wavelength | Tx: 1490nm、1577nm Rx: 1310nm |
| Encapsulation Type | XFP |
| Port Rate | Tx：10.3125Gbit/s、1.25Gbit/s Rx：1.25Gbit/s |
| Minimun Output Optical Power | 10G: 2 dBm 1G: 2.5 dBm |
| Maximum Output Optical Power | 10G: 5 dBm 1G: 7 dBm |
| Maximum Receiver Sensitivity | -29.78dBm |
| Optical Connector Type | SC/PC |
| Optical Fiber Type | Single-mode |
| Overload Optical Power | -9.38dBm |
| Extinction Ratio | 10G: 6 dB 1G: 9 dB |
| Device Specifications | |
| Dimensions (W x D x H) | 22.86 mm x 237.00 mm x 395.40 mm |
| Power Consumption and Maximum Frame Size | |
| Power Consumption | Static: 25 W; Maximum: 54 W |
| Maximum Frame Size | 1996 bytes (1G) 2004 bytes (10G) |
| Operating temperature | -40°C to +65°C |
Which software version should be used? Is upgrading to the latest version necessary?
For carrier networks, the priority is:
1. Version stability
2. Board compatibility
3. Feature consistency with existing equipment
Use a widely deployed, mature version rather than the newest release. Always prepare a rollback plan before upgrading
Which PON technologies are supported by the MA5608T?
The MA5608T supports:
GPON service boards (ITU-T G.984)
EPON service boards (IEEE 802.3ah)
Which uplink options are supported?
The MA5608T supports GE and 10GE uplink interfaces through dedicated uplink boards, enabling flexible integration into aggregation or core networks. Link protection and redundant uplink configurations are supported.
What are the most common operational issues with the MA5600 Series?
Typical issues encountered in the field include:
1. ONU drop / optical power fluctuations due to ODN attenuation or fiber aging
2. Control board switchover failure caused by mismatched versions
3. IPTV freezing triggered by incomplete multicast configuration or insufficient uplink bandwidth
4. ONU not registering due to OMCI compatibility problems
5. Device reboot caused by fan or power module aging
Routine power-level inspections, board version checks, and temperature monitoring can significantly reduce risks.
Does the MA5600 Series support IPv6? Will software upgrades be required?
Yes. IPv6 is supported when:
The control board runs a software version that includes IPv6 features.
ONUs/ONTs support IPv6 (bridge or routing mode).
The broadband service is configured for IPv6 address assignment (SLAAC/PD/DHCPv6).
A unified IPv6 plan is recommended to avoid routing inconsistencies.
| Weight | 3.0000 kg |
|---|---|
| Dimensions | 49.0000 × 32.5000 × 7.5000 cm |
| MA5600T |
.svg)
.svg)
Marku –
We purchased two pieces for testing in our MA5680T and the results are very good.