H902CGHF

Huawei H902CGHF MA5800 series 16-port XG-PON and GPON combo OLT Interface Board apply to Huawei MA5800 series with XG-PON & GPON C+/N2a Optical Module

SKU: 03025XQR Category:

Description

H902CGHF Overview

Huawei H902CGHF is a 16-port XG-PON and GPON Combo OLT interface board with XG-PON & GPON C+/N2a Optical Module, apply to Huawei MA5800-X2, X7, X15, X17 NG OLT system. It works together with the optical network unit (ONU) to provide XG-PON and GPON access services.

Forwarding Capability: 200 Gbit/s

Max split radio: 1:256

Maximum Frame Size:
2052 bytes
9216 bytes (jumbo frame enabled)
T-CONTs per PON port:
GPON: 1024
XG-PON: 2048
Maximum number of MAC addresses: 131072
Service flows per PON board: 16352

GPON channel:

  • Tx: 2.488 Gbit/s
  • Rx: 1.244 Gbit/s

XG-PON channel:

  • Tx: 9.953 Gbit/s
  • Rx: 2.488 Gbit/s
Front Panel

H902CGHF

H902CGHF Datasheet

Item H902CGHF
Service ports
GPON Port 16 XG-PON & GPON ports
Forwarding Capality 200 Gbit/s
Rate mode Asymmetric rate
T-CONTs per PON port GPON: 1024

XG-PON: 2048

Service flows per PON board 16352
Maximum frame size 2052 bytes

9216 bytes (jumbo frame enabled)

Maximum number of MAC addresses 131072
Maximum distance difference between

two ONUs under the same PON port

 40 km
FEC Bidirection
CAR group Supported
HQoS Supported
Variable-length OMCI Supported
ONU-based shaping or queue-based shaping Supported
Type B protection(dual-homing) Supported
Type B protection(single-homing) Supported
Type C protection(dual-homing) Supported(applicable to GPON channels)
Type C protection(single-homing) Supported(applicable to GPON channels)
1588v2 Supported
Rogue ONT detection and isolation Supported
Automatic shutdown at high temperature Supported
Energy saving for service boards Supported
D-CCAP Not supported
GPON SFP Module Specification
Type One-fiber bi-directional optical module C+

One-fiber bi-directional optical module N2a

Operating Wavelength GPON channel:

Tx: 1490 nm

Rx: 1310 nm

XG-PON channel:

Tx: 1577 nm

Rx: 1270 nm

Encapsulation Type SFP+
Port Rate GPON channel:

Tx: 2.488 Gbit/s

Rx: 1.244 Gbit/s

XG-PON channel:

Tx: 9.953 Gbit/s

Rx: 2.488 Gbit/s

Minimum Output Optical Power N2a:

GPON channel: 3 dBm

XG-PON channel: 4 dBm

C+:

GPON channel: 3 dBm

XG-PON channel: 5 dBm

Maximum Output Optical Power N2a:

GPON channel: 7 dBm

XG-PON channel: 8 dBm

C+:

GPON channel: 7 dBm

XG-PON channel: 8 dBm

Maximum Receiver Sensitivity N2a:

GPON channel: -32 dBm

XG-PON channel: -29.5 dBm

C+:

GPON channel:-32dBm

XG-PON channel:-30.5dBm

Optical Connector Type SC
Optical Fiber Type Single-mode
Overload Optical Power N2a:

GPON channel: -12 dBm

XG-PON channel: -9 dBm

C+:

GPON channel: -12 dBm

XG-PON channel: -10 dBm

Extinction Ratio 8.2 dB
Device Specifications
Dimensions (W x D x H) 23.30 mm * 257.90 mm * 399.20 mm
Power Consumption 
Power Consumption Static: 48 W

Maximum: 106 W

Operating temperature -40°C to +65°C

Additional information

Weight 3.0000 kg
Dimensions 49.0000 × 32.5000 × 7.5000 cm

1 review for H902CGHF

  1. 5 out of 5

    Vladimir

    My parcel was lost, Telecomate.com helped me to apply for insurance. I fould a good supplier.


Add a review

has been added to your cart:
Checkout