S5720-52X-SI-AC
Huawei S5720-52X-SI-AC switch supports 48 10/100/1000BASE-T ports, 4 10GE SFP+ ports, 2 hot swappable AC/DC power supplies, 1 AC equipped
- Description
- DATASHEET
- Packing info
- Reviews (1)
Description
S5720-52X-SI-AC Overview
Huawei S5720-52X-SI-AC switch with 48 10/100/1000BASE-T ports, 4 10GE SFP+ ports, 2 hot swappable AC/DC power supplies, 1 AC equipped, which is one of the S5720s serie switch.
Huawei S5720 series Ethernet switches are next-generation energy-saving GE switches designed to provide high-bandwidth access and Ethernet multi-service aggregation.
Telecomate.com provides a full range of Huawei switches, optical modules, extension boards, if you have more demands, please contact [email protected].
S5720-52X-SI-AC Quick Specs
48 10/100/1000BASE-T ports
4 10GE SFP+ ports
2 hot swappable AC/DC power supplies
1 AC equipped
Forwarding performance is 132 Mpps
Switching capacity is 336 Gbit/s
S5720-52X-SI-AC appearance and structure
1. Forty-eight 10/100/1000BASE-T ports | 6. Ground screw |
2. Four 10GE SFP+ ports | 7. ESN label |
3. One ETH management port | 8. Power module slot 2 |
4. One console port | 9. Power module slot 1 |
5. One USB port |
S5720-52X-SI-AC Datasheet
Item | S5720-52X-SI-AC |
Fixed port | 48 10/100/1000 Ethernet ports, 4 10GE SFP+ ports |
ETH management port | Supported |
Console port (RJ45) | Supported |
Forwarding performance | 132 Mpps |
Switching capacity | 336 Gbit/s |
Extended slot | NA |
CPU | Frequency:800 MHz
Cores:2 |
Storage | Memory (RAM):512 MB
Flash memory:Hardware: 512MB, of which 240 MB is available for users |
MAC address table | IEEE 802.1d compliance |
16K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and black hole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN mapping | |
Jumbo frame | 10K |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover |
|
SEP, ERPS(G.8032) | |
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) | |
BPDU protection, root protection, and loop protection | |
IP routing | Static route, RIPv1, RIPv2, RIPng, ECMP, OSPF, OSPFv3, BGP, BGP4+, ISIS, ISISv6, VRRP, VRRP6 |
IPv6 features | Neighbor Discovery (ND) |
Path MTU (PMTU), MLD v1/v2 snooping | |
IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
Multicast forwarding | PIM DM, PIM SM, PIM SSM |
IGMP v1/v2/v3 snooping and IGMP fast leave | |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source | |
MAC address, destination MAC address, source IP address, destination IP address,TCP/UDP port number, protocol type, and VLAN ID |
|
Rate limiting in each queue and traffic shaping on ports | |
Security | User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
Blackhole MAC address entries | |
MAC Forced Forwarding (MFF) | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 |
|
Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist | |
802.1x authentication, MAC address authentication, and combined authentication on a per port basi |
|
Portal authentication on a per VLANIF interface basis, MACSec(hardware ready) | |
OAM | Software OAM: |
EFM OAM | |
CFM OAM | |
CFM OAM | |
Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration |
Automatically loading the system software package and patches of clients | |
One-click and automatic delivery of service configurations | |
Supports independent running client | |
Management and Maintenance |
iStack, Virtual cable test, SNMP v1/v2c/v3, RMON |
Web-based NMS | |
System logs and alarms of different levels | |
sFlow | |
LLDP/LLDP-MED | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating environment | Operating temperature: 0-1800 m altitude: 0-45℃ 1800-5000 m altitude: The operating temperature reduces by 1℃ every time the altitude increases by 220 m. Relative humidity: 5% to 95% (non-condensing) |
Input voltage | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz |
Dimensions (mm) | 442 (W) x 420 (D)x 43.6 (H) |
height | 1 U |
Chassis weight (full configuration weight,including weight of packaging materials) |
9.5 kg |
Typical power consumption |
33.8W |
Additional information
Weight | 14.0000 kg |
---|---|
Dimensions | 71.0000 × 55.0000 × 17.5000 cm |
Matt –
Best seller, excellent equipment!