S5720S-28X-SI-AC
Huawei S5720S-28X-SI-AC switch supports 24 10/100/1000BASE-T ports, 4 10GE SFP+ ports, fixed AC power
- Description
- DATASHEET
- Packing info
- Reviews (1)
Description
S5720S-28X-SI-AC Overview
Huawei S5720S-28X-SI-DC switch with 24 10/100/1000BASE-T ports, 4 10GE SFP+ ports, fixed DC power, which is one of the S5720 serie switch.
Huawei S5720 series Ethernet switches are next-generation energy-saving GE switches designed to provide high-bandwidth access and Ethernet multi-service aggregation.
Telecomate.com provides a full range of Huawei switches, optical modules, extension boards, if you have more demands, please contact [email protected].
S5720S-28X-SI-AC Quick Specs
24 10/100/1000BASE-T ports
4 10GE SFP+ ports
fixed DC power
Forwarding performance is 96 Mpps
Switching capacity is 336 Gbit/s
S5720S-28X-SI-AC appearance and structure
1. Twenty-four 10/100/1000BASE-T ports | 6. Ground screw |
2. Four 10GE SFP+ ports | 7. RPS socket |
3. One ETH management port | 8. Jack for AC power cable locking strap |
4. One console port | 9. AC socket |
5. One USB port |
S5720S-28X-SI-AC Datasheet
Description | S5720S-28X-SI-AC |
Fixed port | 24 Ethernet 10/100/1000 ports and 4 10 Gig SFP+ |
Forwarding perfomance | 96Mpps |
Switching capacity | 336Gbps |
Extended slot | NA |
MAC address table | IEEE 802.1d |
16K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN mapping | |
Jumbo frame | 10K |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level | |
protection switchover | |
Smart Ethernet Protection (SEP),G.8032 Ethernet Ring Protection Switching (ERPS) | |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) | |
BPDU protection, root protection, and loop protection | |
IP routing | Static route, RIPv1, RIPv2, RIPng, ECMP, OSPF, OSPFv3, BGP, BGP4+, ISIS, ISISv6, VRRP, VRRP6 |
IPv6 features | Neighbor Discovery (ND) |
Path maximum transmission unit (PMTU) | |
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or | |
protocol types | |
Multicast Listener Discovery (MLD) v1/v2 snooping | |
Multicast forwarding | PIM DM, PIM SM, PIM SSM |
IGMP v1/v2/v3 snooping and IGMP fast leave | |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
Eight queues per port, | |
Rate limiting in each queue and traffic shaping on ports | |
Re-marking of the 802.1p priority and DSCP value of packets | |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source | |
MAC address, destination MAC address, source IP address, destination IP address, | |
TCP/UDP port number, protocol type, and VLAN ID | |
Security features | User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
Blackhole MAC address entries | |
MAC Forced Forwarding (MFF) | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
802.1x authentication, MAC address authentication, and combined authentication on a per port basis | |
Portal authentication on a per VLANIF interface basis | |
CPU defense; Blacklist and whitelist; MACSec hardware ready | |
Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration |
Automatically loading the system software package and patches of clients | |
One-click and automatic delivery of service configurations | |
Supports independent running client | |
OAM | Software OAM: |
EFM OAM | |
CFM OAM | |
Y.1731 performance test | |
Management and Maintenance | iStack, Virtual cable test, SNMP v1/v2c/v3 |
Web-based network management system | |
System logs and multi-level alarms | |
sFlow | |
LLDP/LLDP-MED | |
RMON | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating environment | Operating temperature: |
0-1800 m altitude: 0-45℃ | |
1800-5000m altitude: The operating temperature reduces by 1℃ every time the | |
altitude increases by 220m. | |
Relative humidity: 5% to 95% (noncondensing) | |
Input voltage | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC |
Dimensions (mm) | 442 (W) x 220 (D)x 43.6 (H) |
Typical power consumption | 22W |
Additional information
Weight | 5720-28-- kg |
---|---|
Dimensions | 55.0000 × 36.0000 × 9.0000 cm |
Adam –
All devices come with standard package and in good conditions.