Home/Transport Network/OSN 9800 Series/OSN 9800 M Series/TNS5NP400Y
TNS5NP400Y
TNS5NP400Y
TNS5NP400Y
TNS5NP400Y
Categories:,

TNS5NP400Y

0 Reviews Write a review
SKU2036103
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 TNS5NP400Y 1x200G Turbo WDM Line Service Processing Extended Board.

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

TNS5NP400Y Overview

TNS5NP400Y 1x200G Turbo WDM Line Service Processing Extended Board.

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

The TNS5NP400Y board has only one variant: TNS5NP400Y.

 

Valid slots for the TNS5NP400Y board in M05/M12/M24 subrack

Device Number of Occupied Slots Physical Slot Logical Slot
OptiX OSN 9800 M05 1 IU1, IU2, IU3, IU4, IU5 IU1, IU2, IU3, IU4, IU5
OptiX OSN 9800 M12 1 IU1 to IU13 IU1 to IU13
OptiX OSN 9800 M24 1 IU1 to IU24 IU1 to IU24
Item TNS5NP400Y
Functions and Features of the TNS5NP400Y Board (OTN Tributary)
Backplane capacity The total backplane bandwidth is 200 Gbit/s.
Client-side service type SDH service:
  • STM-1: SDH service at a rate of 155.52 Mbit/s
  • STM-4: SDH service at a rate of 622.08 Mbit/s
  • STM-16: SDH service at a rate of 2488.32 Mbit/s
  • STM-64: SDH service at a rate of 9.95 Gbit/s
SONET service:
  • OC-3: SONET service at a rate of 155.52 Mbit/s
  • OC-12: SONET service at a rate of 622.08 Mbit/s
  • OC-48: SONET service at a rate of 2488.32 Mbit/s
  • OC-192: SONET service at a rate of 9.95 Gbit/s
Ethernet service:
  • FE: Ethernet service at a rate of 125 Mbit/s. Supports FE optical signals.
  • GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals.
  • 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
  • 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
  • 25GE: Ethernet service at a rate of 25.78 Gbit/s
  • 40GE: Ethernet service at a rate of 41.25 Gbit/s
  • 50GE: Ethernet service at a rate of 53.125 Gbit/s
  • 100GE: Ethernet service at a rate of 103.125 Gbit/s
Flexible ethernet service:
  • 100G FlexE unaware: Flexible ethernet services at a rate of 103.125 Gbit/s
OTN service:
  • OTU1: OTN service at a rate of 2.67 Gbit/s
  • OTU2: OTN service at a rate of 10.71 Gbit/s
  • OTU2e: OTN service at a rate of 11.1 Gbit/s
  • OTU4: OTN service at a rate of 111.81 Gbit/s
SAN service:
  • FC100: SAN service at a rate of 1.06 Gbit/s
  • FC200: SAN service at a rate of 2.12 Gbit/s
  • FC400: SAN service at a rate of 4.25 Gbit/s
  • FC800: SAN service at a rate of 8.5 Gbit/s
  • FC1200: SAN service at a rate of 10.51 Gbit/s
  • FC1600: SAN service at a rate of 14.025 Gbit/s
  • FC1600-Trunk-2: SAN service at a rate of 2 × 14.025Gbit/s
  • FC1600-Trunk-4: SAN service at a rate of 4 × 14.025Gbit/s
  • FC3200: SAN service at a rate of 28.05 Gbit/s
  • FICON: SAN service at a rate of 1.06 Gbit/s
  • FICON Express: SAN service at a rate of 2.12 Gbit/s
  • FICON 4G: SAN service at a rate of 4.25 Gbit/s
  • FICON 8G: SAN service at a rate of 8.5 Gbit/s
  • FICON 10G: SAN service at a rate of 10.51 Gbit/s
  • ESCON: SAN service at a rate of 200 Mbit/s
  • FDDI: SAN service at a rate of 125 Mbit/s
Video service:
  • SDI: Serial digital interface at a rate of 270 Mbit/s
  • HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
  • HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
  • 3G-SDI: Video service at a rate of 2.97 Gbit/s
  • 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
  • DVB-ASI: Video service at a rate of 270 Mbit/s
Service mapping mode
  • GE service: Supports GFP-T/(TTT+GMP) mapping.
  • 10GE LAN service: Supports GFP-F/BMP/(IMP+BMP) mapping.
  • 40GE service: Supports (TTT+GMP) mapping.
  • 25GE/50GE service: Supports BMP/GFP-F mapping.
  • 100GE service: Supports GMP/GFP-F mapping.
NOTE:
The Bit Transparent Mapping(11.1G IMP+BMP) mode can be used for service interconnection with the Bit Transparent Mapping(11.1G) mode.
FEC coding Supports FEC/RSFEC coding.
OTN overhead
  • ODU0/ODUflex layer: supports PM and TCM overhead processing.
  • ODU1/ODU2 layer:
    • Supports PM and TCM overhead processing.
    • Supports Non-intrusive monitoring of PM and TCM overheads and SM overhead processing are supported when OTN services are configured.
  • ODU3 layer: supports PM and TCM overhead processing when 40GE services are received on the client side.
  • ODU4 layer:
    • Supports PM and TCM overhead processing when 100GE services are received on the client side.
    • Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads.
    • Supports SM overhead processing at the OTU4 layer on the client side.
OSU Not supported
LPT Supports the LPT function when the client-side service is FE/GE/10GE LAN.
NOTE:
The port equipped with an electrical module does not support LPT.
Client 1+1 protection Supported
NOTE:
  • When a MPO module is used on the client side, the board does not support client 1+1 protection.
  • When FlexE service is accessed, the board does not support client 1+1 protection.
  • Supported when LC optical modules are used on the client side to receive 100GE, 50GE, 40GE, 25GE, 10GE, GE services.
ODUk SNCP Supported
NOTE:
  • ODUk SNCP and tributary SNCP cannot be configured for the same service at the same time.
  • ODUk SNCP protection and encryption function cannot be configured on a port at the same time.
OSUflex SNCP Not supported
Tributary SNCP Supported
NOTE:
ODUk SNCP and tributary SNCP cannot be configured for the same service at the same time.
Electrical-layer ASON Supported
L1 service encryption Supports setting the encryption function by port.
NOTE:
  • When working in ODU1 convergence mode or the OTU4 service is accessed, the board does not support encryption.
  • The client-side ports do not support broadcast cross-connection and encryption function at the same time.
  • ClientLP port encryption is supported in the case of FlexE services.
ALS Supports the ALS function on the client side when client services are non-OTN services.
NOTE:
The port equipped with an electrical module does not support ALS.
LLDP When the client-side service type is ethernet service, the board supports the LLDP function.
NOTE:
  • LLDP is not supported when 10GE WAN, GE, FE and FlexE services are received on the client side.
  • When the service mapping mode is MAC transparent mapping, the LLDP mode of the port is the Receive mode by default. In this case, LLDP packets are not transparently transmitted.
Physical clock
  • Supports synchronous Ethernet transparent transmission instead of synchronous Ethernet processing when receiving 100GE(GMP)/50GE (BMP)/40GE (TTT+GMP)/25GE (BMP)/10GE LAN(BMP)/GE (TTT+GMP) services on the client side.
  • Supports synchronous Ethernet processing instead of synchronous Ethernet transparent transmission when receiving 100GE(GFP-F)/50GE (GFP-F)/25GE (GFP-F)/10GE LAN(GFP-F)/GE (GFP-T)/100G FlexE unaware services on the client side.
NOTE:
  • Synchronous Ethernet transparent transmission is not supported when 10GE LAN (IMP+BMP) services are received.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports physical-layer clocks.
IEEE 1588v2 Supported
NOTE:
  • Supported only when the client-side service type is 100GE(GFP-F)/50GE(GFP-F)/25GE(GFP-F)/10GE LAN(GFP-F)/GE(GFP-T)/100G FlexE unaware.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports IEEE 1588v2.
ITU-T G.8275.1 Supported
NOTE:
  • Supported only when the client-side service type is 100GE(GFP-F)/50GE(GFP-F)/25GE(GFP-F)/10GE LAN(GFP-F)/GE(GFP-T)/100G FlexE unaware.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports ITU-T G.8275.1.
ITU-T G.8273.2 Supported
High-precision clock synchronization Supported
NOTE:
  • This function is not supported when the board uses the QSFP28,1310,100GE,-3.1dBm,4dBm,-4.5dBm,LC,SMF,2km,PAM4 module.
  • The high-precision clock synchronization function can be implemented only after the corresponding license is obtained.
  • The board must work with the subrack and system control board that support high-precision clock to support the high-precision clock synchronization function. For details, see Clock Synchronization Feature Guide.
  • Supported only when the client-side service type is 100GE(GFP-F)/50GE(GFP-F)/25GE(GFP-F)/10GE LAN(GFP-F)/GE(GFP-T).
Outband DCN Supports communication over ESCs.
Test frame Supported when the client-side service type is 100GE/50GE(GFP-F)/40GE/25GE(GFP-F)/10GE LAN(GFP-F)/GE (GFP-T).
NOTE:
Supports this function only in ODU1 convergence mode when receiving FE services on the client side.
PRBS
  • Supports the PRBS test function in the optical port direction and backplane direction when OTU4 services are received on the tributary side.
  • Supports the PRBS test function in the backplane direction when other services are received on the tributary side.
Latency measurement
  • Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side.
  • Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side.
NOTE:
In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
Channel loopback Supports inloops and outloops on channels.
NOTE:
ODU0 channel loopbacks are supported only when the port working mode is the ODU1_ODU0 mode (OTU1->ODU1->ODU0).
Port loopback
  • Supports inloops and outloops on the client side.
  • Supports ODUk inloops and ODUk outloops on the client side.
  • Supports inloops and outloops in a FlexE group.
NOTE:
  • Client-side loopback is not supported when the port accesses 4 x 10GE LAN signals.
  • When no cross-connection is configured on a client-side port, inloops cannot be configured on the client-side port.
  • ODUk loopback and FlexE group loopback cannot be configured at the same time.
Functions and Features of the TNS5NP400Y Board (OTN Line)
Backplane capacity The total backplane bandwidth is 200 Gbit/s.
WDM specification Supports the DWDM specifications.
Tunable wavelength Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
FEC coding WDM side: Supports SDFEC coding.
Line modulation format 200G m16QAM-H
Typical channel spacing 50GHz*n(n=1,2...)(Only the standard center frequency of 50 GHz is supported.)
OTN overhead
  • ODU0/ODUflex/ODUC2 layer: supports PM and TCM overhead processing.
  • ODU1/ODU2 layer:
    • Supports PM and TCM overhead processing.
    • Supports Non-intrusive monitoring of PM and TCM overheads and SM overhead processing are supported when OTN services are configured.
  • ODU3 layer: supports PM and TCM overhead processing when 40GE services are received on the client side.
  • ODU4 layer:
    • Supports PM and TCM overhead processing when 100GE services are received on the client side.
    • Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads.
    • Supports SM overhead processing at the OTU4 layer on the client side.
  • OSUflex layer: PM overhead processing.
  • OTUC2 layer: supports SM overhead processing on the WDM side.
OSU Supported
NOTE:
The OSU function requires a license.
Intra-board 1+1 protection Supported
NOTE:
Supports intra-board 1+1 protection when working with optical protection boards.
ODUk SNCP Supported
NOTE:
  • The ODUk SNCP protection group cannot be configured on different channels of the line-side port of the board.
  • ODUk SNCP and tributary SNCP cannot be configured for the same service at the same time.
  • ODUk SNCP protection and encryption function cannot be configured on a port at the same time.
OSUflex SNCP Supported
NOTE:
  • The OSUflex SNCP protection group cannot be configured on different channels of the line-side port of the board.
  • OSUflex SNCP and tributary SNCP cannot be configured for the same service at the same time.
  • OSUflex SNCP protection and encryption function cannot be configured on a port at the same time.
  • In line mode, the board supports a maximum of 512 OSUflex SNCP protection groups.
Tributary SNCP Supported
NOTE:
ODUk SNCP and tributary SNCP cannot be configured for the same service at the same time.
Electrical-layer ASON Supported
Optical-layer ASON Supported
Digital optical label When LS Ability is enabled, the board supports loading low-frequency pilot-tone modulation signals and overheads during wavelength conversion, and can work the optical-layer board that supports the digital optical label function to detect optical power and overheads and report optical performance data.
Physical clock Supported
NOTE:
When the ODU cross-connect granularity of an OTN line port is set to the maximum granularity supported by the port, physical clock synchronization is not supported. The physical clock can be used only after lower-order ODU cross-connections are configured.
IEEE 1588v2 Not supported
ITU-T G.8275.1 Not supported
ITU-T G.8273.2 Not supported
Outband DCN Supports communication over ESCs.
Test frame Not supported
PRBS Supported
Latency measurement Supports PM and TCM latency measurement for upstream higher-order ODU channels.
NOTE:
In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
Channel loopback 200G line: supports ODU0/ODU1/ODU2/ODU3/ODU4/ODUflex/OSUflex channel inloop and outloop.
NOTE:
The board does not support the channel loopback and ODUk loopback at the same time.
Port loopback Supports inloops and outloops on the WDM side.
Functions and Features of the TNS5NP400Y Board (OTU)
Basic function The board can convert client-side services into OTU signals,the client-side service supports hybrid transmission of different services, for details about the service types, number of channels, and mapping paths supported by different ports, see Applications.
Client-side service type SDH service:
  • STM-1: SDH service at a rate of 155.52 Mbit/s
  • STM-4: SDH service at a rate of 622.08 Mbit/s
  • STM-16: SDH service at a rate of 2488.32 Mbit/s
  • STM-64: SDH service at a rate of 9.95 Gbit/s
SONET service:
  • OC-3: SONET service at a rate of 155.52 Mbit/s
  • OC-12: SONET service at a rate of 622.08 Mbit/s
  • OC-48: SONET service at a rate of 2488.32 Mbit/s
  • OC-192: SONET service at a rate of 9.95 Gbit/s
Ethernet service:
  • FE: Ethernet service at a rate of 125 Mbit/s. Supports FE optical signals.
  • GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals.
  • 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
  • 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
  • 25GE: Ethernet service at a rate of 25.78 Gbit/s
  • 40GE: Ethernet service at a rate of 41.25 Gbit/s
  • 50GE: Ethernet service at a rate of 53.125 Gbit/s
  • 100GE: Ethernet service at a rate of 103.125 Gbit/s
OTN service:
  • OTU1: OTN service at a rate of 2.67 Gbit/s
  • OTU2: OTN service at a rate of 10.71 Gbit/s
  • OTU2e: OTN service at a rate of 11.1 Gbit/s
  • OTU4: OTN service at a rate of 111.81 Gbit/s
SAN service:
  • FC100: SAN service at a rate of 1.06 Gbit/s
  • FC200: SAN service at a rate of 2.12 Gbit/s
  • FC400: SAN service at a rate of 4.25 Gbit/s
  • FC800: SAN service at a rate of 8.5 Gbit/s
  • FC1200: SAN service at a rate of 10.51 Gbit/s
  • FC1600: SAN service at a rate of 14.025 Gbit/s
  • FC1600 Trunk-2: SAN service at a rate of 2 × 14.025Gbit/s
  • FC1600 Trunk-4: SAN service at a rate of 4 × 14.025Gbit/s
  • FC3200: SAN service at a rate of 28.05 Gbit/s
  • FICON: SAN service at a rate of 1.06 Gbit/s
  • FICON Express: SAN service at a rate of 2.12 Gbit/s
  • FICON 4G: SAN service at a rate of 4.25 Gbit/s
  • FICON 8G: SAN service at a rate of 8.5 Gbit/s
  • FICON 10G: SAN service at a rate of 10.51 Gbit/s
  • ESCON: SAN service at a rate of 200 Mbit/s
  • FDDI: SAN service at a rate of 125 Mbit/s
Video service:
  • SDI: Serial digital interface at a rate of 270 Mbit/s
  • HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
  • HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
  • 3G-SDI: Video service at a rate of 2.97 Gbit/s
  • 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
  • DVB-ASI: Video service at a rate of 270 Mbit/s
Flex Ethernet service (FlexE)
  • 100G FlexE unaware: The rate is 103.125 Gbit/s.
Service mapping mode
  • GE service: Supports GFP-T/(TTT+GMP) mapping.
  • 10GE LAN service: Supports GFP-F/BMP/(IMP+BMP) mapping.
  • 40GE service: Supports (TTT+GMP) mapping.
  • 25GE/50GE service: Supports BMP/GFP-F mapping.
  • 100GE service: Supports GMP/GFP-F mapping.
NOTE:
The Bit Transparent Mapping(11.1G IMP+BMP) mode can be used for service interconnection with the Bit Transparent Mapping(11.1G) mode.
WDM specification Supports the DWDM specifications.
Tunable wavelength When a wavelength-tunable optical module is configured, WDM-side optical signals are tunable within 96 wavelengths at a 50 GHz channel spacing in extended C band.
FEC coding
  • Client side: Supports FEC coding when the client-side service type is OTU4.
  • Client side: Supports RSFEC coding when the client-side service type is 25GE/50GE/100GE/FC3200/FlexE.
  • WDM side: Supports SDFEC coding.
Line modulation format 200G m16QAM-H
Typical channel spacing 50GHz*n(n=1,2...)(Only the standard center frequency of 50 GHz is supported.)
OTN overhead
  • ODU0/ODUflex/ODUC2 layer: supports PM and TCM overhead processing.
  • ODU1/ODU2 layer:
    • Supports PM and TCM overhead processing.
    • Supports Non-intrusive monitoring of PM and TCM overheads and SM overhead processing are supported when OTN services are configured.
  • ODU3 layer: supports PM and TCM overhead processing when 40GE services are received on the client side.
  • ODU4 layer:
    • Supports PM and TCM overhead processing when 100GE services are received on the client side.
    • Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads.
    • Supports SM overhead processing at the OTU4 layer on the client side.
  • OTUC2 layer: supports SM overhead processing on the WDM side.
LPT Supports the LPT function when the client-side service is FE/GE/10GE LAN.
NOTE:
The port equipped with an electrical module does not support LPT.
Intra-board 1+1 protection Supported
NOTE:
Supports intra-board 1+1 protection when working with optical protection boards.
Client 1+1 protection Supported
NOTE:
  • When a MPO module is used on the client side, the NP400Y board does not support client 1+1 protection.
  • When 100GE, 50GE, 40GE, 25GE, 10GE and GE services with a LC module are received on the client side, client 1+1 protection supports unidirectional switching and bidirectional switching.
  • When the client-side service type is FlexE, client 1+1 protection is not supported.
ODUk SNCP Not supported
Tributary SNCP Supported
NOTE:
Supports intra-board tributary SNCP protection.
Optical-layer ASON Supported
L1 service encryption Supports setting the encryption function by port.
NOTE:
  • When working in ODU1 convergence mode or the OTU4 service is accessed, the board does not support encryption.
  • The client-side ports do not support broadcast cross-connection and encryption function at the same time.
  • When FlexE services are received, ClientLP port encryption is supported.
Digital optical label When LS Ability is enabled, the board supports loading low-frequency pilot-tone modulation signals and overheads during wavelength conversion, and can work the optical-layer board that supports the digital optical label function to detect optical power and overheads and report optical performance data.
ALS Supports the ALS function on the client side when client services are non-OTN services.
NOTE:
The port equipped with an electrical module does not support ALS.
LLDP Supports the LLDP function when the client-side service is ethernet.
NOTE:
  • The LLDP function is not supported when the client-side service is 10GE WAN/GE/FE/FlexE.
  • When the service mapping mode is MAC transparent mapping, the LLDP mode of the port is the Receive mode by default. In this case, LLDP packets are not transparently transmitted.
Physical clock
  • Supports synchronous Ethernet transparent transmission when receiving 100GE(Bit Transparent Mapping)/50GE (BMP)/40GE (TTT+GMP)/25GE (BMP)/10GE LAN(Bit Transparent Mapping(11.1G))/GE (TTT+GMP) services on the client side.
  • Supports synchronous Ethernet processing when receiving 100GE(MAC transparent mapping)/50GE (GFP-F)/25GE (GFP-F)/10GE LAN(MAC transparent mapping(10.7G))/GE (GFP-T)/100GE FlexE Unaware services on the client side.
NOTE:
  • Synchronous Ethernet transparent transmission is not supported when 10GE LAN (IMP+BMP) services are received.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports physical-layer clocks.
IEEE 1588v2 Supported
NOTE:
  • Supported only when the client-side service type is 100GE(GFP-F)/50GE(GFP-F)/25GE(GFP-F)/10GE LAN(GFP-F)/GE(GFP-T)/100G FlexE Unaware.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports IEEE 1588v2.
ITU-T G.8275.1 Supported
NOTE:
  • Supported only when the client-side service type is 100GE(MAC Transparent Mapping ODU4)/50GE(MAC Transparent Mapping(GFP-F))/25GE(MAC Transparent Mapping(GFP-F))/10GE LAN(MAC Transparent Mapping(10.7G))/GE(GFP-T)/100G FlexE Unaware.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports ITU-T G.8275.1.
ITU-T G.8273.2 Supported
High-precision clock synchronization Supported
NOTE:
  • This function is not supported when the board uses the QSFP28,1310,100GE,-3.1dBm,4dBm,-4.5dBm,LC,SMF,2km,PAM4 module.
  • The high-precision clock synchronization function can be implemented only after the corresponding license is obtained.
  • The board must work with the subrack and system control board that support high-precision clock to support the high-precision clock synchronization function. For details, see Clock Synchronization Feature Guide.
  • Supported only when the client-side service type is 100GE(GFP-F)/50GE(GFP-F)/25GE(GFP-F)/10GE LAN(GFP-F)/GE(GFP-T).
Outband DCN Supports ESC communication.
Test frame Supported when the client-side service type is 100GE/50GE(GFP-F)/40GE/25GE(GFP-F)/10GE LAN(MAC transparent mapping(10.7G))/GE (GFP-T).
NOTE:
Supports this function only in ODU1 convergence mode when receiving FE services on the client side.
PRBS
  • Supports the PRBS function on the WDM side.
  • The PRBS function in the client-side optical port direction is supported only when the service type is STM-1, OC–3, STM-4, OC-12, STM-16, OC-48, OTU1, STM-64, OC-192, OTU2, OTU2e or OTU4.
  • PRBS signals can be sent from the client-side optical port to the system side when client services are non-OTN services.
NOTE:
The client-side PRBS function is not supported when the board accesses 4 x 10GE signals.
Latency measurement
  • Supports PM and TCM latency measurement for upstream higher-order ODU channels.
  • Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side.
  • Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side.
NOTE:
In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
Channel loopback Channel loopback is supported when the client-side port receives 4 x 10GE signal.
Port loopback
  • Supports the client-side inloop and outloop.
  • Supports the client-side ODUk inloop and outloop.
  • Supports the WDM-side inloop and outloop.
  • Supports inloops and outloops in a FlexE group.
NOTE:
  • Client-side loopback is not supported when the port accesses 4 x 10GE LAN signals.
  • When no cross-connection is configured on a client-side port, inloops cannot be configured on the client-side port.
  • When the board receives FC1600-Trunk-2 services
    • A maximum of four FC1600-Trunk-2 services are supported, and each service needs to use a combination of two client-side ports, which are ports TX5/RX5 to TX6/RX6, ports TX7/RX7 to TX8/RX8, ports TX11/RX11 to TX12/RX12 or ports TX13/RX13 to TX14/RX14.
    • Ports TX5/RX5, TX7/RX7, TX11/RX11 and TX13/RX13 support client-side inloops and outloops. Ports TX6/RX6, TX8/RX8, TX12/RX12 and TX14/RX14 support only outloops. An outloop cannot be configured for the first port and other ports in the same group concurrently.
  • When the board receives FC1600-Trunk-4 services
    • A maximum of two FC1600-Trunk-4 services are supported, and each service needs to use a combination of four client-side ports, which are ports TX5/RX5 to TX8/RX8 or ports TX11/RX11 to TX14/RX14.
    • Ports TX5/RX5 and TX11/RX11 support client-side inloops and outloops. Ports TX6/RX6 to TX8/RX8 and TX12/RX12 to TX14/RX14 support only outloops. An outloop cannot be configured for the first port and other ports in the same group concurrently.
  • ODUk loopback and FlexE group loopback cannot be configured at the same time.
Alarm and performance event monitoring
  • Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line failures.
  • Supports the monitoring of OTN alarms and performance events.
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Supports the monitoring of the bias current of the laser.
  • Supports the monitoring of the temperature of the laser.
  • Supports the monitoring of the optical power.
Functions and Features of the TNS5NP400Y Board (Multi-function Mode)
Backplane capacity The total backplane bandwidth is 200 Gbit/s.
Client-side service type SDH service:
  • STM-1: SDH service at a rate of 155.52 Mbit/s
  • STM-4: SDH service at a rate of 622.08 Mbit/s
  • STM-16: SDH service at a rate of 2488.32 Mbit/s
  • STM-64: SDH service at a rate of 9.95 Gbit/s
SONET service:
  • OC-3: SONET service at a rate of 155.52 Mbit/s
  • OC-12: SONET service at a rate of 622.08 Mbit/s
  • OC-48: SONET service at a rate of 2488.32 Mbit/s
  • OC-192: SONET service at a rate of 9.95 Gbit/s
Ethernet service:
  • FE: Ethernet service at a rate of 125 Mbit/s. Supports FE optical signals.
  • GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals.
  • 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
  • 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
  • 25GE: Ethernet service at a rate of 25.78 Gbit/s
  • 40GE: Ethernet service at a rate of 41.25 Gbit/s
  • 50GE: Ethernet service at a rate of 53.125 Gbit/s
  • 100GE: Ethernet service at a rate of 103.125 Gbit/s
OTN service:
  • OTU1: OTN service at a rate of 2.67 Gbit/s
  • OTU2: OTN service at a rate of 10.71 Gbit/s
  • OTU2e: OTN service at a rate of 11.1 Gbit/s
  • OTU4: OTN service at a rate of 111.81 Gbit/s
SAN service:
  • FC100: SAN service at a rate of 1.06 Gbit/s
  • FC200: SAN service at a rate of 2.12 Gbit/s
  • FC400: SAN service at a rate of 4.25 Gbit/s
  • FC800: SAN service at a rate of 8.5 Gbit/s
  • FC1200: SAN service at a rate of 10.51 Gbit/s
  • FC1600: SAN service at a rate of 14.025 Gbit/s
  • FC1600 Trunk-2: SAN service at a rate of 2 × 14.025Gbit/s
  • FC1600 Trunk-4: SAN service at a rate of 4 × 14.025Gbit/s
  • FC3200: SAN service at a rate of 28.05 Gbit/s
  • FICON: SAN service at a rate of 1.06 Gbit/s
  • FICON Express: SAN service at a rate of 2.12 Gbit/s
  • FICON 4G: SAN service at a rate of 4.25 Gbit/s
  • FICON 8G: SAN service at a rate of 8.5 Gbit/s
  • FICON 10G: SAN service at a rate of 10.51 Gbit/s
  • ESCON: SAN service at a rate of 200 Mbit/s
  • FDDI: SAN service at a rate of 125 Mbit/s
Video service:
  • SDI: Serial digital interface at a rate of 270 Mbit/s
  • HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
  • HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
  • 3G-SDI: Video service at a rate of 2.97 Gbit/s
  • 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
  • DVB-ASI: Video service at a rate of 270 Mbit/s
Flex Ethernet service (FlexE)
  • 100G FlexE unaware: The rate is 103.125 Gbit/s.
Service mapping mode
  • GE service: Supports GFP-T/(TTT+GMP) mapping.
  • 10GE LAN service: Supports GFP-F/BMP/(IMP+BMP) mapping.
  • 40GE service: Supports (TTT+GMP) mapping.
  • 25GE/50GE service: Supports BMP/GFP-F mapping.
  • 100GE service: Supports GMP/GFP-F mapping.
NOTE:
The Bit Transparent Mapping(11.1G IMP+BMP) mode can be used for service interconnection with the Bit Transparent Mapping(11.1G) mode.
WDM specification Supports the DWDM specifications.
Tunable wavelength When a wavelength-tunable optical module is configured, WDM-side optical signals are tunable within 96 wavelengths at a 50 GHz channel spacing in extended C band.
FEC coding
  • Client side: Supports FEC coding when the client-side service type is OTU4.
  • Client side: Supports RSFEC coding when the client-side service type is 25GE/50GE/100GE/FC3200/FlexE.
  • WDM side: Supports SDFEC coding.
Line modulation format 200G m16QAM-H
Typical channel spacing 50GHz*n(n=1,2...)(Only the standard center frequency of 50 GHz is supported.)
OTN overhead
  • ODU0/ODUflex/ODUC2 layer: supports PM and TCM overhead processing.
  • ODU1/ODU2 layer:
    • Supports PM and TCM overhead processing.
    • Supports Non-intrusive monitoring of PM and TCM overheads and SM overhead processing are supported when OTN services are configured.
  • ODU3 layer: supports PM and TCM overhead processing when 40GE services are received on the client side.
  • ODU4 layer:
    • Supports PM and TCM overhead processing when 100GE services are received on the client side.
    • Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads.
    • Supports SM overhead processing at the OTU4 layer on the client side.
  • OSUflex layer: PM overhead processing.
  • OTUC2 layer: supports SM overhead processing on the WDM side.
OSU Supported
NOTE:
The OSU function requires a license.
LPT Supports the LPT function when the client-side service is FE/GE/10GE LAN.
NOTE:
The port equipped with an electrical module does not support LPT.
Intra-board 1+1 protection Supported
NOTE:
Supports intra-board 1+1 protection when working with optical protection boards.
Client 1+1 protection Supported
NOTE:
  • When a MPO module is used on the client side, the NP400Y board does not support client 1+1 protection.
  • When 100GE, 50GE, 40GE, 25GE, 10GE and GE services with a LC module are received on the client side, client 1+1 protection supports unidirectional switching and bidirectional switching.
  • When the client-side service type is FlexE, client 1+1 protection is not supported.
ODUk SNCP Supported
NOTE:
The ODUk SNCP protection group cannot be configured on different channels of the line-side port of the board. ODUk SNCP and tributary SNCP cannot be configured for the same service at the same time. when cross-connections are created between the port and the line side of this board and between the port and the line side of other boards, the port does not support the SNCP protection and port inloop loopback at the same time. ODUk SNCP protection and encryption function cannot be configured on a port at the same time.
OSUflex SNCP Supported
NOTE:
  • The OSUflex SNCP protection group cannot be configured on different channels of the line-side port of the board.
  • OSUflex SNCP and tributary SNCP cannot be configured for the same service at the same time.
  • When cross-connections are created between the port and the line side of this board and between the port and the line side of other boards, the port does not support the SNCP protection and port inloop loopback at the same time.
  • OSUflex SNCP protection and encryption function cannot be configured on a port at the same time.
  • In line mode, the board supports a maximum of 512 OSUflex SNCP protection groups.
Tributary SNCP Supported
NOTE:
ODUk SNCP and tributary SNCP cannot be configured for the same service at the same time. When cross-connections are created between the port and the line side of this board and between the port and the line side of other boards, the port does not support the SNCP protection and port inloop loopback at the same time.
Optical-layer ASON Supported
Electrical-layer ASON Supported
NOTE:
This function is supported only when the board works in tributary or line mode.
L1 service encryption Supports setting the encryption function by port.
NOTE:
  • When working in ODU1 convergence mode or the OTU4 service is accessed, the board does not support encryption.
  • The client-side ports do not support broadcast cross-connection and encryption function at the same time.
  • When FlexE services are received, ClientLP port encryption is supported.
Digital optical label When LS Ability is enabled, the board supports loading low-frequency pilot-tone modulation signals and overheads during wavelength conversion, and can work the optical-layer board that supports the digital optical label function to detect optical power and overheads and report optical performance data.
ALS Supports the ALS function on the client side when client services are non-OTN services.
NOTE:
The port equipped with an electrical module does not support ALS.
LLDP When the client-side service type is ethernet service, the board supports the LLDP function.
NOTE:
  • The LLDP function is not supported when the client-side service is 10GE WAN/GE/FE/FlexE.
  • When the service mapping mode is MAC transparent mapping, the LLDP mode of the port is the Receive mode by default. In this case, LLDP packets are not transparently transmitted.
Physical clock
  • Supports synchronous Ethernet transparent transmission when receiving 100GE(Bit Transparent Mapping)/50GE (BMP)/40GE (TTT+GMP)/25GE (BMP)/10GE LAN(Bit Transparent Mapping(11.1G))/GE (TTT+GMP) services on the client side.
  • Supports synchronous Ethernet processing when receiving 100GE(MAC transparent mapping)/50GE (GFP-F)/25GE (GFP-F)/10GE LAN(MAC transparent mapping(10.7G))/GE (GFP-T)/100GE FlexE Unaware services on the client side
NOTE:
  • Synchronous Ethernet transparent transmission is not supported when 10GE LAN (IMP+BMP) services are received.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports physical-layer clocks.
IEEE 1588v2 Supported
NOTE:
  • Supported only when the client-side service type is 100GE(GFP-F)/50GE(GFP-F)/25GE(GFP-F)/10GE LAN(GFP-F)/GE(GFP-T)/100G FlexE Unaware.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports IEEE 1588v2.
ITU-T G.8275.1 Supported
NOTE:
  • Supported only when the client-side service type is 100GE(MAC Transparent Mapping ODU4)/50GE(MAC Transparent Mapping(GFP-F))/25GE(MAC Transparent Mapping(GFP-F))/10GE LAN(MAC Transparent Mapping(10.7G))/GE(GFP-T)/100G FlexE Unaware.
  • When the TX1/RX1 and TX2/RX2 ports receive 4 x 10GE services, only the first 10GE channel of the 4 x 10GE supports ITU-T G.8275.1.
ITU-T G.8273.2 Supported
High-precision clock synchronization Supported
NOTE:
  • This function is not supported when the board uses the QSFP28,1310,100GE,-3.1dBm,4dBm,-4.5dBm,LC,SMF,2km,PAM4 module.
  • The high-precision clock synchronization function can be implemented only after the corresponding license is obtained.
  • The board must work with the subrack and system control board that support high-precision clock to support the high-precision clock synchronization function.For details, see Clock Synchronization Feature Guide.
  • Supported only when the client-side service type is 100GE(GFP-F)/50GE(GFP-F)/25GE(GFP-F)/10GE LAN(GFP-F)/GE(GFP-T).
Outband DCN Supports communication over ESCs.
Test frame Supported when the client-side service type is 100GE/50GE(GFP-F)/40GE/25GE(GFP-F)/10GE LAN(MAC transparent mapping(10.7G))/GE (GFP-T).
NOTE:
Supports this function only in ODU1 convergence mode when receiving FE services on the client side.
PRBS
  • Supports the PRBS test function in the optical port direction and backplane direction when OTU4 services are received on the tributary side.
  • Supports the PRBS test function in the backplane direction when other services are received on the tributary side.
  • Supports the PRBS test function on the line side.
Latency measurement
  • Supports PM and TCM latency measurement for upstream higher-order ODU channels.
  • Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side.
  • Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side.
NOTE:
In a mapping path, the maximum granularity ODUk channel is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
Channel loopback
  • 100G line: supports ODU0/ODU1/ODU2/ODU3/ODUflex/OSUflex channel inloop and outloop.
  • 200G line: supports ODU0/ODU1/ODU2/ODU3/ODU4/ODUflex/OSUflex channel inloop and outloop.
NOTE:
  • Neither the client side nor the WDM side of the board supports the channel loopback and ODUk loopback functions at the same time.
  • When a client-side port accesses 4 x 10GE signals, only channel loopback is supported.
  • When cross-connections are set up between the client-side port and the line side of the board only, channel loopback is not supported.
Port loopback
  • Supports inloops and outloops on the WDM side.
  • Supports inloops and outloops on the client side.
  • Supports ODUk inloops and ODUk outloops on the client side.
  • · Supports inloops and outloops in a FlexE group.
NOTE:
  • when cross-connections are created between the port and the line side of this board and between the port and the line side of other boards, the port does not support the SNCP protection and port inloop loopback at the same time.
  • Client-side loopback is not supported when the port accesses 4 x 10GE LAN signals.
  • When the board functions as an OTU board, the line-side rate is 100 Gbit/s, and the client-side accesses 100GE/OTU4 services, WDM-side loopback is not supported.
  • When no cross-connection is configured on a client-side port, inloops cannot be configured on the client-side port.
  • ODUk loopback and FlexE group loopback cannot be configured together.
Alarm and performance event monitoring
  • Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line failures.
  • Supports the monitoring of OTN alarms and performance events.
  • Supports the remote monitoring (RMON) of Ethernet services.
  • Supports the monitoring of the bias current of the laser.
  • Supports the monitoring of the temperature of the laser.
  • Supports the monitoring of the optical power.
Functions and Features of the TNS5NP400Y Board (Regeneration)
Basic function Electrically regenerates optical signals at an electrical REG station.
Regeneration mode Unidirectional regeneration
Regeneration rate OTUC2
WDM specification Supports the DWDM specifications.
Tunable wavelength When a wavelength-tunable optical module is configured, WDM-side optical signals are tunable within 96 wavelengths at a 50 GHz channel spacing in extended C band.
FEC coding SDFEC
Line modulation format 200G m16QAM-H
OTN overhead
  • ODUC2 layer: supports PM and TCM overhead processing.
  • OTUC2 layer: supports SM overhead processing.
Optical-layer ASON Supported
ALS Supported
Outband DCN Supports ESC communication.
Alarm and performance event monitoring
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports CD and PMD performance monitoring.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TNS5NP400Y”

Your email address will not be published. Required fields are marked *

  −  1  =  3

Related products

TNV1T410-1TNV1T410-4
Quick view
Categories1: ,

TNV1T410

R.F.Q
SKU2012911
TNV3T210-2
Quick view
Categories1: ,

TNV3T210

R.F.Q
SKU2012843
Quick view
Categories1: ,

OSN 9800 U64 Standard

R.F.Q
(2)
SKU2012885
TNV8T404-1TNV8T404-4
Quick view
Categories1: ,

TNV8T404

R.F.Q
SKU2012908
OSN-9800-U16
Quick view
Categories1: ,

OSN 9800 U16

R.F.Q
(2)
SKU2012848
TNS2N220-1
Quick view
Categories1: ,

TNS2N220

R.F.Q
(2)
SKU2012850
Main Menu
Back to Top

Search For Products

Popular
Product has been added to your cart